Antifungal and antimycotoxigenic effects of Zingiber officinale,Cinnamomum zeylanicum and Cymbopogon martinii essential oils against Fusarium verticillioides

ABSTRACT

There is an increasing demand for fungi control in grains, especially toxigenic. Also, there is growing concern on the use of synthetic fungicides; thus alternatives are needed. The aim of this study was to evaluate the antifungal and antimycotoxigenic action of essential oils (EOs) from Zingiber officinale, Cinnamomum zeylanicum and Cymbopogon martinii against Fusarium verticillioides, a spoilage and toxigenic fungus. Essential oils were first chemically characterised by gas chromatography coupled to mass spectrometry, and their antioxidant potential was measured by the DPPH, ABTS and FRAP methods. Minimum inhibitory concentration (MIC) and disc diffusion were used to assess antifungal activity. Scanning electron microscopy was used to evaluate morphological changes in the fungus. Antimycotoxigenic activity of the EOs against the production of fumonisin B₁ and B₂ by F. verticillioides was evaluated using ultra-high-performance liquid chromatography system. Z. officinale, C. zeylanicum and C. martinii EOs were predominantly composed by zingiberene and geranial; eugenol; and geraniol, respectively. All the EOs had high antioxidant power, especially that from C. zeylanicum. The MICs were 250, 500 and 2,000 µg mL^?1 for C. zeylanicum, C. martinii and Z. officinale EOs, respectively. Mycelial reduction of F. verticillioides was observed when EOs were used, and the lowest activity was detected in the Z. officinale EO. Overall, the tested EOs promoted structural damage to the fungal cell wall, decreased conidia size and mycelial reduction. Antimycotoxigenic evaluation of the EOs evidenced a significant reduction (p < .05) in the production of fumonisins B₁ and B₂ with all the EOs evaluated in the study. These results suggest that especially C. zeylanicum and C. martinii EOs are highly useful for controlling F. verticillioides and fumonisins production.     

An unsupervised approach for fault diagnosis of power transformers

Electrical utilities apply condition monitoring on power transformers (PTs) to prevent unplanned outages and detect incipient faults. This monitoring is often done using dissolved gas analysis (DGA) coupled with engineering methods to interpret the data, however the obtained results lack accuracy and reproducibility. In order to improve accuracy, various advanced analytical methods have been proposed in the literature. Nonetheless, these methods are often hard to interpret by the decision-maker and require a substantial amount of failure records to be trained. In the context of the PTs, failure data quality is recurrently questionable, and failure records are scarce when compared to nonfailure records. This work tackles these challenges by proposing a novel unsupervised methodology for diagnosing PT condition. Differently from the supervised approaches in the literature, our method does not require the labeling of DGA records and incorporates a visual representation of the results in a 2D scatter plot to assist in interpretation. A modified clustering technique is used to classify the condition of different PTs using historical DGA data. Finally, well-known engineering methods are applied to interpret each of the obtained clusters. The approach was validated using data from two different real-world data sets provided by a generation company and a distribution system operator. The results highlight the advantages of the proposed approach and outperformed engineering methods (from IEC and IEEE standards) and companies legacy method. The approach was also validated on the public IEC TC10 database, showing the capability to achieve comparable accuracy with supervised learning methods from the literature. As a result of the methodology performance, both companies are currently using it in their daily DGA diagnosis.     

Dynamics of lipid droplets in the endometrium and fatty acids and oxylipins in the uterine lumen,blood, and milk of lactating cows during diestrus

Our objective was to investigate the lipid content of uterus, blood plasma, and milk at early, mid, and late diestrus. Lactating cows (n = 30) had the estrous cycle and ovulation synchronized by administration of exogenous hormones. Cows were blocked by parity and assigned randomly to receive transcervical uterine flushing and biopsy on d 5 (early diestrus), 10 (mid diestrus) or 15 (late diestrus) of the estrous cycle. Flushing and endometrial biopsy were performed in the uterine horn ipsilateral to the corpus luteum. The recovered flushing was used for analyses of lipid composition by liquid chromatography-tandem mass spectrometry and the biopsy was used for investigation of lipid droplet abundance in endometrial cryosections using a neutral lipid fluorescent dye. In addition, blood and milk samples were collected from all cows on d 5, 10, and 15. All blood samples were used to measure the concentration of progesterone in plasma, and all milk samples were used to determine milk composition. Subsamples of blood plasma and milk were also used to evaluate the composition of fatty acids and oxylipins using the same methodology used for uterine flushing samples. The abundance of lipid droplets in the endometrium increased 1.9-fold from d 5 to 10, and 2-fold from d 10 to 15. Concentration of long-chain fatty acids and oxylipins in uterine flushing were, on average, 2.2 and 2.5 times greater in samples collected on d 15 compared with those collected on d 5 and 10. These differences were not observed in blood and milk, suggesting that accumulation of fatty acids and oxylipins in the uterus is regulated locally. In addition to concentration, the profile of individual fatty acids and oxylipins in uterine lumen changed substantially during diestrus. The main categories with increased abundance at late diestrus were mono- and polyunsaturated fatty acids, and oxylipins derived from arachidonic acid, dihomo-γ-linolenic acid, and docosahexaenoic acid. In conclusion, fatty acids and oxylipins accumulate in the uterine lumen during diestrus and might work as a mechanism to supply these lipids to the developing conceptus at late diestrus, when the onset of elongation occurs and substantial synthesis of biomass and cell signaling by lipid mediators are required.     

The rapid synthesis of nanostructured orthorhombic KNbO3 particles by a microwave-assisted hydrothermal method and their characterization

We studied the molar ratio effects of niobium and potassium precursors on the structure and morphology of potassium niobate powders prepared via microwave-assisted hydrothermal synthesis (MaHS). KNbO₃ nanostructures in the form of nanotowers and nanocubes were obtained at reduced synthesis times (30–240 min). The products were characterized via XRD, Raman spectroscopy, SEM, and TEM; band gap calculations used diffuse reflectance data. The results indicate that KNbO₃ nanostructures were obtained with crystallite sizes ranging from 33 to 52 nm. An orthorhombic crystalline structure was formed from the increase of KOH at a molar ratio Nb₂O₅:KOH (1:8 to 1:16 M). The band-gap of 3.1–3.3 eV has potential use in photodegradation applications.     

Fundamental and applied aspects of catechins from different sources: a review

Catechins belong to the group of flavonoids. Numerous studies show that consuming foods rich in catechins such as vegetables, fruits and especially teas may decrease the risk of developing various diseases. Therefore, we present in this compilation a critical and detailed analysis of the works published in the last 6 years and a guide for the reader with the main analytical techniques of quantification, in vitro and in vivo biological activities, the mechanisms of action in the organism and the bioaccessibility in treating the gastrointestinal effects of catechins from different matrices. The information presented in this review is important for a broad understanding of benefits that catechins can bring to human health and can be taken as an example for the study of new matrices, new effects and possible forms of application, such as dietary supplements or functional food ingredients for health promotion and the reduced risk for developing diseases.     

Influence of the chemical structure of additives poly(ethylene-co-vinyl acetate)-based on the pour point of crude oils

One of the methods to prevent wax precipitation, during petroleum production, transport, and refining, is the use of polymer additives that can reduce the oil pour point. However, no single additive work for all types of crude oil and this relation is not yet well known. In this study, a family of polymers based on poly(ethylene-co-vinyl acetate), containing hydroxyl groups and long pendant hydrocarbon chains (from C6 to C18), were synthesized and characterized by H¹ nuclear magnetic resonance and solubility test. Four crude oil samples containing different amounts and size distribution of the wax were used. The additive's action is favored by higher contents of iso + cycloalkanes and lower contents of n-paraffins with larger chain sizes. The presence of the CH₃COO group in the copolymers promoted the lowering of the pour point, supported by a low OH concentration and the presence of a long pendant hydrocarbon chain: the best results were obtained with C10 and C12 chain lengths. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48969.     

Identification of potential technologies for 1,4-Butanediol production using prospecting methodology

1,4-Butanediol (1,4-BDO) is a four-carbon diol used for industrial applications such as organic solvents, and the production of adhesives, fibers and polyurethanes. 1,4-BDO currently is produced through several petrochemical routes: hydrogenation of maleic anhydride, isomerization of propylene oxide, acetoxylation of butadiene, and the reaction between formaldehyde and acetylene. The current trends in 1,4-BDO production involve the utilization of renewable sources such as biomass. In this context, the present study aimed to identify promising technologies of 1,4-BDO production through prospecting methodology based on the analyses of patents and scientific article, describing the most relevant aspects of those emerging technologies. An increasing amount of 1,4-BDO production focused on biotechnological routes has been reported, with the US heavily involved in the development of new technologies. This study tracked three promising technologies which have potential for application in a biorefinery context because those processes involve (i) production of 1,4-BDO from sugars, classified herein as the biotechnological route; (ii) production of intermediates from sugar fermentation followed by catalytic conversion into 1,4-BDO, classified herein as the hybrid route, and (iii) furan/furfural conversion into 1,4-BDO. © 2020 Society of Chemical Industry