Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Tetracycline resistance genes in activated sludge wastewater treatment plants

The development and proliferation of antibiotic resistance in pathogenic, commensal, and environmental microorganisms is a major public health concern. The extent to which human activities contribute to the maintenance of environmental reservoirs of antibiotic resistance is poorly understood. In the current study, wastewater treatment plants (WWTPs) were investigated as possible sources of tetracycline resistance via qualitative PCR and quantitative PCR (qPCR). Various WWTPs and two freshwater lakes were surveyed for the presence of an array of 10 tetracycline resistance determinants (tet(R)): tet(A)-(E), tet(G), tet(M), tet(O), tet(Q), tet(S). All WWTP samples contained more different types of tet(R) genes, as compared to the lake water samples. Gene copy numbers of tet(G) and tet(Q) in these samples were quantified via qPCR and normalized to both the volume of original sample and to the amount of DNA extracted per sample (a proxy for bacterial abundance). Concentrations of tet(Q) were found to be highest in wastewater influent while tet(G) concentrations were highest in activated sludge. Investigation of the effects of UV disinfection on wastewater effluent showed no reduction in the number of detectable tet(R) gene types.     

A framework for rapid local area modeling for construction automation

Rapid 3D positioning and modeling in construction can be used to more effectively plan, visualize, and communicate operations before execution. It can also help to optimize equipment operations, significantly improve safety, and enhance a remote operator's spatial perception of the workspace. A new framework for rapid local area sensing and 3D modeling for better planning and control of construction equipment operation is described and demonstrated. By combining human-assisted graphical workspace modeling with pre-stored Computer-Aided Design (CAD) models and simple sensors (such as single-axis laser rangefinders and remote video cameras), modeling time can be significantly reduced while potentially increasing modeling accuracy.     

Removing low ppb level perchlorate, RDX, and HMX from groundwater with cetyltrimethylammonium chloride (CTAC) pre-loaded activated carbon

Perchlorate contaminates vast amounts of groundwater throughout the United States which could potentially be used as potable water. Activated carbon pre-loaded with cetyltrimethylammonium chloride has been shown in this research to be an effective adsorbent for removing perchlorate from three low conductivity (50-66 microS/cm) groundwaters containing perchlorate (ClO(4)(-)) concentrations of 0.85, 1.0, and 5.6 parts per billion (ppb), respectively. In rapid small-scale column tests (RSSCTs), the virgin granular activated carbon (GAC) (used as a control) treated between 20,000 and 40,000 bed volumes (BV) of water. In contrast, the activated carbon that was pre-loaded with CTAC processed 170,000-270,000 BV before perchlorate was detected above 0.25 ppb in the effluent. Though this pre-loading significantly increased the capacity for perchlorate, it also diminished the GAC's capacity to remove organics. The groundwater containing 1 ppb ClO(4)(-) also contained the nitro-organics HMX (0.6 ppb) and RDX (5.5-6.6 ppb). RDX was detected in the effluent from the CTAC-pre-loaded bed after only 8000 BV had been processed whereas 308,000 BV could be processed through the virgin bed before RDX was detected. Likewise, HMX breakthrough was observed after 116,000 BV in the CTAC-pre-loaded bed while the virgin RSSCT exhibited no breakthrough of HMX during a test that was operated for 309,000 BV. However, by combining a CTAC-pre-loaded bed followed by a virgin GAC bed in series, both perchlorate and RDX could be removed for the same length of time.     

The agglomeration of exporters by destination

Precise characterization of informational trade barriers is neither well documented nor understood. Using Russian customs data, we document that regional destination-specific export spillovers exist for developing countries, extending a result that was only known for developed countries. This result suggests behavior responding to a destination barrier. To account for this fact, we build on a monopolistic competition model of trade by postulating an externality in the international transaction of goods. We test the model’s prediction on region-level exports using Russian data and find improvement over gravity-type models without agglomeration. This finding has important development implications in that export policy that considers current trade partners may be more effective than policy that focuses only on the exporting country’s industries. Furthermore, our findings can be considered in the burgeoning literature refining transaction costs beyond the traditional iceberg cost.     

Thiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption

Oxidized cellulose nanofibers (CNF), embedded in an electrospun polyacrylonitrile (PAN) nanofibrous scaffold, were grafted with cysteine to increase the adsorption capability for chromium (VI) and lead (II). Thiol-modified cellulose nanofibers (m-CNF) were characterized by titration, FT-IR, energy dispersive spectroscopy (EDS) and SEM techniques. Static and dynamic Cr(VI) and Pb(II) adsorption studies of m-CNF nanofibrous composite membranes were carried out as a function of pH and of contact time. The results indicated these membranes exhibited high adsorption capacities for both Cr(VI) (87.5 mg/g) and Pb(II) (137.7 mg/g) due to the large surface area and high concentration of thiol groups (0.9 mmol of –SH/gram m-CNF). The morphology and property of m-CNF nanofibrous composite membranes was found to be stable, and they could be used and regenerated multiple times with high recovery efficiency.     

Evaluation of the Interaction between Phosphohistidine Analogues and Phosphotyrosine Binding Domains

We have investigated the interaction of peptides containing phosphohistidine analogues and their homologues with the prototypical phosphotyrosine binding SH2 domain from the eukaryotic cell signalling protein Grb2 by using a combination of isothermal titration calorimetry and a fluorescence anisotropy competition assay. These investigations demonstrated that the triazole class of phosphohistidine analogues are capable of binding too, suggesting that phosphohistidine could potentially be detected by this class of proteins in vivo.     

Investigating the relationship between perceived risks in communication and ICT-enabled communicative behaviors

We examine employees’ perceptions of communication problems in the workplace and their active communication behavioral responses when multiple information communication technologies (ICTs) are available for use. Through the lens of the situational theory of publics, we shed light on how employees adapt to increasing communication demands. We uncovered active technology-mediated behavior such as information gaining, action, and social interaction seeking, and their association with perceived risk (i.e., message, information and action). Findings suggest that technology-mediated communication behaviors are not only enabled by the use of ICTs but behavior also involves appropriate structuring of single and multiple ICTs to manage problems encountered during communication.