Dietary exposure to acrylamide in a group of Japanese adults based on 24-hour duplicate diet samples

Acrylamide is a probable human carcinogen and known human neurotoxin that can be generated in food through heating. Using a mathematical modelling approach, our previous study estimated long-term average dietary exposure to acrylamide in the Japanese people; however, the validity of these estimates remained unknown. Here, we aimed to obtain a more accurate estimate of acrylamide exposure that would reflect the usual practice of heat processing and consumption of foods in the population. We collected duplicate diet samples and dietary records during 24 h from a group of Japanese adults. A total of 110 duplicate diet samples were analysed for acrylamide by LC-MS/MS. Data from individual dietary records were used to examine the association between dietary acrylamide exposure and consumption of selected food groups (e.g., coffee, tea, confectioneries, and vegetables prepared at high temperature [deep-frying, stir-frying, sautéing, and baking]). Of the 110 homogenised diet samples, 108 contained detectable levels of acrylamide. Dietary exposure to acrylamide ranged from 8 to 1582 ng/kg body weight (bw)/day, with the mean value of 215 ng/kg-bw/day and median value of 143 ng/kg-bw/day. This mean value was higher than the value we previously estimated for Japanese adults using a mathematical approach. Multiple linear regression analysis showed log dietary acrylamide exposure was significantly associated with consumption of coffee and vegetables prepared at high temperature during 24-hr of sampling (adj. R² = 0.250, p < 0.001). We revealed significant difference in dietary acrylamide exposure between participants who had coffee and vegetables prepared at high temperature (median, 169 ng/kg-bw/day; range, 35–1224 ng/kg-bw/day, n = 42) and those who had none of them (median, 75 ng/kg-bw/day; range, 8–311 ng/kg-bw/day, n = 15) (Steel-Dwass test, p < 0.05).     

Effect of hydrogen charging on dislocation behavior in Ni-Cr and Ni<Subscript>2</Subscript>Cr alloys

The effects of hydrogen charging on the dislocation behaviour in Ni-Cr binary alloys have been investigated by means of transmission electron microscope (TEM) observations using single-crystalline specimens. The deformation mode of Ni-Cr alloys in the absence of hydrogen is characterized by planar dislocations. However, hydrogen charging changed the dislocation configurations to promote curved dislocations, such as dislocation loops and dipoles. The hydrogen-affected dislocation configurations are enhanced with increasing Ni content and reducing Cr content. Weak-beam images show that the Shockley partials of the hydrogen-affected dislocations frequently constrict to make kinks and cross-slip, as if the dislocations were generated by a thermally activated process. The effect of hydrogen charging on superdislocations of a Ni₂Cr superstructure has been also investigated using an aged 70Ni-30Cr alloy. While the deformation mode in the Ni₂Cr superlattice is classified as five variants of superdislocation triplets and one variant of ordinary dislocations, the hydrogen charging has preferred the ordinary dislocations to the superdislocation triplets. The results suggest that the charged hydrogen changes the local plasticity to affect the deformation dynamics in Ni-Cr alloys, where the influence of hydrogen on the plasticity is sensitive to the Ni/Cr concentration and the symmetry of atomic arrangement.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Motivational bases of the public goods problem.

Compared 2 motivational bases for not contributing to a public good, desire to "free ride" (or greed) and fear of being a "sucker," among 110 Japanese undergraduates. It was hypothesized that these 2 types of motivation would be activated under different situations. When a public good was provided conjunctively, fear would have a strong effect but greed would not; when a public good was disjunctively provided, greed would have a strong effect but fear would not. In addition, it was predicted that the greater mutual trust existing among friends would make them contribute more than strangers would in the conjunctive condition but would make no difference in the disjunctive condition. Three types of production rules, in which a public good was conjunctively, disjunctively, or additively produced on the basis of members' contributions, were experimentally created. Half of the groups in each condition consisted of total strangers, and the other half consisted of friends. The hypotheses were supported when the size of the public good (bonus points) was relatively large. Also, Ss responded similarly in the conjunctive condition and in the additive condition. (25 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phase structure in the blend of atactic poly(vinyl alcohol) with atactic poly(vinyl alcohol‐block‐vinyl acetate)

An almost fully saponified atactic poly(vinyl alcohol) and an atactic poly(vinyl alcohol‐block‐vinyl acetate) of which degree of saponification is 89 mol % were blended by a solution casting method. The phase structure of the blend film was analyzed by optical microscopy, ¹³C‐NMR, and differential scanning calorimetry. The most remarkable structure of the blend was composed of cylindrical domains penetrating the film. The swelling behavior of the blend films was also investigated in the dimethylsulfoxide and water mixed solvents to find differences in solubility and diffusion behavior between the matrix and the domain. The cylindrical domains could be selectively dissolved away in water and the film became porous. We tried to change the size of the cylindrical domain with various film preparation conditions. This aimed to turn the film into the useful filter membrane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1807–1815, 2002     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

A portable toolkit for supporting end-user personalization and control in context-aware applications

A context-aware application in the pervasive computing environment provides intuitive user centric services using implicit context cues. Personalization and control are important issues for this class of application as they enable end-users to understand and configure the behavior of an application. However most development efforts for building context-aware applications focus on the sensor fusion and machine learning algorithms to generate and distribute context cues that drive the application with little emphasis on user-centric issues. We argue that, to elevate user experiences with context-aware applications, it is very important to address these personalization and control issues at the system interface level in parallel to context centric design. Towards this direction, we present Persona, a toolkit that provides support for extending context-aware applications with end-user personalization and control features. Specifically, Persona exposes a few application programming interfaces that abstract end-user customization and control mechanisms and enables developers to integrate these user-centric aspects with rest of the application seamlessly. There are two primary advantages of Persona. First, it can be used with various existing middlewares as a ready-to-use plug-in to build customizable and controllable context-aware applications. Second, existing context-aware applications can easily be augmented to provide end-user personalization and control support. In this paper, we discuss the design and implementation of Persona and demonstrate its usefulness through the development and augmentation of a range of common context-aware applications.     

Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.