Enhancement of glass-ceramic performance by TiO2 doping: In vitro cell viability,proliferation, and differentiation

A new TiO₂-containing bioactive glass and glass-ceramics based on 50SiO₂-(45-X)CaO-(XTiO₂)-5P₂O₅ system was designed using a sol–gel technique (where X = 5, 7.5 and 10 wt %). The roles of the crystallization behavior and physicochemical characteristics of the designed glass and glass-ceramics which were played in the introduction of TiO₂ substitutions were investigated. Moreover, cell proliferation and differentiation were evaluated against human osteosarcoma cells (Saos-2). The TiO₂/CaO replacements led to the formation of a stronger glass structure and thus increased thermal parameters and the chemical stabilization of the designed materials. The FTIR data confirmed the existence of Ti within the glass and glass-ceramics samples, and no remarkable effect on their chemical integrity was observed. The XRD patterns indicated that calcium-containing minerals, including Ca₂SiO₄,Ca₃(PO₄)₂, Ca(Ti,Si)O₅, CaTiSiO₅, and Ca₁₅(PO₄)₂·(SiO₄)₆ phases were developed as a role of structure/texture under the applied heat-treatment. The results of the cytotoxicity test proved that a safe sample dose is 12–50 μg/ml, at which cell viability is ≥ 85%. The cell differentiation determined by ALP test proved the superiority of glass-ceramics compared with their native glasses. Therefore, the obtained materials could be safely used as novel biocompatible materials for the regeneration of bone tissue.     

An adaptive region segmentation combining surrogate model applied to correlate design variables and performance parameters in a transonic axial compressor

Surrogate models have been widely applied to correlate design variables and performance parameters in turbomachinery optimization applications. With more design variables and uncertain factors taken into account in an optimization design problem, the mathematical relations between the design variables and the performance parameters might present linear, low-order nonlinear or even high-order nonlinear characteristics, and are usually analytically unknown. Therefore, it is required that surrogate models have high adaptability and prediction accuracy for both the linear and nonlinear characteristics. The paper mainly investigates the effectiveness of an adaptive region segmentation combining surrogate model based on support vector regression and kriging model applied to a transonic axial compressor to approximate the complicated relationships between geometrical variables and objective performance outputs with different sampling methods and sizes. The purpose is to explore the prediction accuracy and computational efficiency of this adaptive surrogate model in real turbomachinery applications. Three different sampling techniques are studied: (1) uniform design; (2) Latin hypercube sampling method; (3) Sobol quasi-random design. For the low dimensional case with five variables, the adaptive region segmentation combining surrogate model performs better (not worse) than the single component surrogate in terms of prediction accuracy and computational efficiency. In the meanwhile, it is also noted that the uniform design applied to the adaptive surrogate model has more advantages over the Latin hypercube sampling method especially for the small sample size cases, both performing better than the Sobol quasi-random design. Moreover, a high dimensional case with 12 variables is also utilized to further validate the prediction advantage of the adaptive region segmentation combining surrogate model over the single component surrogate, and the computational results favor it. Overall, the adaptive region segmentation combining surrogate model has produced acceptable to high prediction accuracy in presenting complex relationships between the geometrical variables and the objective performance outputs and performed robustly for a transonic axial compressor problem.

     

Impact of graphene oxide nanoparticles and carbon black on the gamma radiation sensitization of acrylonitrile–butadiene rubber seal materials

Seals prepared from acrylonitrile–butadiene rubber (NBR) are primarily used in nuclear services. Nevertheless, at relatively high ionizing radiation doses, NBR seal materials may undergo radiation-induced degradation processes, leading to adverse effects on the sealing ability life. Herein, to strengthen the functional characteristics of NBR seals against radiation, graphene oxide (GO) nanoparticles were prepared and characterized by transmission electron microscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR), and ultraviolet/visible spectroscopies. Various NBR/GO composites fabricated with different ratios of GO nanoparticles and in the presence or absence of carbon black (CB) were investigated via cross-linking density, scanning electron microscopy, XRD, FTIR, and mechanical and thermal stability analyses. The synergistic effect of the simultaneous presence of GO and CB on the NBR seal sensitization to gamma radiation up to a dose of 1 MGy was studied. The physicomechanical properties were enhanced by adding GO nanosheets up to 3 phr and by incorporating 35 phr of a CB with GO until 5 phr. Further, the application of γ-irradiation resulted in an overall enhancement in the mechanical, physical, and thermal stability of the prepared composites up to 0.5 and 1 MGy with GO nanosheets in the absence or presence of CB particles, respectively. The mechanical measurements indicated significant increments by loading with GO nanosheets in the absence and presence of CB as well as by irradiation. The tensile strength elevated up to about 121%, 336%, and 366% by adding 3 phr GO, 3 GO:35 CB phr, and 5 GO:35 CB phr, respectively.     

Different Estimation Methods for Constant Stress Accelerated Life Test under the Family of the Exponentiated Distributions

The Accelerated Life Testing (ALT) has been used for a long time in several fields to obtain information on the reliability of product components and materials under operating conditions in a much shorter time. One of the main purposes of applying ALT is to estimate the failure time functions and reliability performance under normal conditions. This paper concentrates on the estimation procedures under ALT and how to select the best estimation method that gives accurate estimates for the reliability function. For this purpose, different estimation methods are used, such as maximum likelihood, least squares (LS), weighted LS, and probability weighted moment. Moreover, the reliability function under usual conditions is predicted. The estimation procedures are applied under the family of the exponentiated distributions in general, and for the exponentiated inverted Weibull (EIW) as a special case. Numerical analysis including simulated data and a real life data set is conducted to compare the performances between these four methods. It is found that the ML method gives the best results among other estimation methods. Finally, a comparison between the EIW and the Inverted Weibull (IW) distributions based on a real life data set is made using a likelihood ratio test. It is observed that the EIW distribution can provide better fitting than the IW in case of ALT. Copyright © 2015 John Wiley & Sons, Ltd.     

Online scheduling with rejection and withdrawal

We study an online scheduling problem with rejection, in which some rearrangement of the solution is allowed. This problem is called scheduling with rejection and withdrawal. Each arriving job has a processing time and a rejection cost associated with it, and it needs to be either assigned to a machine or rejected upon arrival. At termination, it is possible to choose at most a fixed number of scheduled jobs and withdraw them (i.e., decide to reject them). We study the minimization version, where the goal is to minimize the sum of the makespan and the total rejection cost (which corresponds to the penalty), and the maximization problem, where the goal is to maximize the sum of the minimum load and the total rejection cost (which corresponds to profit). We study environments of machines, which are the case of m identical machines and the case of two uniformly related machines, and show a strong relation between these problems and the related classic online scheduling problems which they generalize, in contrast to standard scheduling with rejection, which typically makes the scheduling problems harder.     

Configuration Maintenance for Distributed Applications Management

The MANDAS project has defined a layered architecture for the management of distributed applications. In this paper we examine a vertical slice of this architecture, namely the management applications and services related to configuration management. We introduce an information model which captures the configuration information for distributed applications and discuss a repository service based on the model. We define a set of services and management applications to support maintenance of configuration information, and describe how the different types of configuration information are collected. Finally, we present two management applications that use configuration information.     

Microstructure and elastic tensile behavior of polyethylene terephthalate-exfoliated graphene nanocomposites

Polyethylene terephthalate-exfoliated graphene nanocomposites were prepared by injection molding. Nanocomposites with graphene platelets of 2, 5, 10, and 15% weight fractions were molded and tested for mechanical characterization. Transmission electron microscopy imaging along with X-ray diffraction show that the graphene platelets remained intact and were dispersed into the matrix. An exponential increase in the Young’s modulus of the nanocomposites was observed, but with current limits on exfoliation they do not yet reach the potential suggested by idealized predictions.     

RAFALE: Rethinking the provisioning of virtuAl network services using a Fast and scAlable machine LEarning approach

Network Function Virtualization (NFV) has been identified to revamp the provisioning of next-generation network services. This new paradigm allows cloud and network/service providers to compose their network services, also known as service function chains (SFCs), in an agile way since the software of the network function is decoupled from the legacy hardware. To reap the benefits of this new technology, there is a need for novel mechanisms that help cloud and network/service providers deploy the increasingly complex virtual network services seamlessly, efficiently, and in a time-efficient way. Existing state-of-the-art techniques often rely on the Integer Linear Programming framework, heuristics/metaheuristics, and greedy methods to deploy the services function chains. However, these techniques although reasonable and acceptable, still suffer from several key limitations: convergence time and scalability. To this end, we propose RAFALE, a suite of solution techniques, to tame this complexity by leveraging the concept of similarity from machine learning and skip-gram modeling framework. To the best of our knowledge, we are the first to tackle these key limitations and propose a suite of solutions to them. RAFALE, a novel approach proposed to find the similarity between the new incoming virtual network service request and all the already-deployed services to learn from the previous experience of deploying techniques and use the same or close similar provisioning techniques. RAFALE is the first and the only method that develops the idea of detecting the similarity between virtual network services. Experimental results show that RAFALE reduces greatly the convergence time needed for provisioning virtual network services and can scale to 100 virtual network functions per virtual network service compared to the state-of-the-art. The Experimental results prove that RAFALE accomplished the NFV promises; decreasing the time and complexity of managing and deploying the virtual services, and providing a solution that is agile, faster, and scalable to deploy the new service requests by skipping one or more service provisioning steps (i.e., detecting and resolving the conflicts among policies, placement, and chaining) while satisfying the validated NFV policies.