Measurement of chemical emission rates from cigarette butts into air

This study examined airborne emissions from cigarette butts for styrene, 2-methyl-2-cyclopenten-1-one, naphthalene, triacetin, and nicotine. Ten experiments were conducted by placing butts in a stainless steel chamber and measuring the chemical concentrations in chamber air. Emission rates were determined from the concentrations. Triacetin and nicotine concentrations were roughly 50% of initial concentrations after 100 hours, while concentrations of other chemicals decayed to less than 10% of initial concentrations within 24 hours. Initial emission rates per cigarette butt ranged from 200 to 3500 ng h⁻¹. Triacetin and nicotine emission rates at 25°C were 1.6 to 2.2 times higher than the rates at 20°C, while the emission rates of other chemicals at 25°C were 1.1 to 1.3 times higher than the rates at 20°C only during the first sampling period. The chemical concentrations and emission rates at 30°C were comparable or lower than the values at 25°C, possibly due to different batches of cigarettes used. The 24-hours emitted mass of nicotine from a cigarette butt at 25°C could be up to 14% of the literature reported nicotine masses emitted from a burning cigarette.     

Quo vadis source tracking? Towards a strategic framework for environmental monitoring of fecal pollution

Advances in microbial source tracking (MST) have largely been driven by the need to comply with water quality standards based on traditional indicator bacteria. Recently, a number of culture-independent, and library-independent methods based on polymerase chain reaction (PCR) have been gaining popularity among source trackers. However, only a limited number of these methods have been successfully used in field applications, primarily due to the fact that many of them are still being developed. In this critical outlook, we examine different viewpoints associated with the practical use of MST to identify critical research gaps, propose a priority-based timeline to address them, and outline emerging technologies that will likely impact the future of source tracking. We propose that it is necessary to consider each of these aspects in order to advance towards a unifying framework in source identification, so that fecal pollution monitoring can be reliably used for comprehensive environmental microbial monitoring, to develop risk assessment models, and to implement and validate adequate management practices.     

SteelStacks艺术文化园区的骨架：胡弗梅森栈桥

正伯利恒钢铁公司是20世纪的一个工业集团,在世界范围内运作工业设施。它于1857年在宾夕法尼亚州里海谷(Lehigh Valley)创立,逐渐占据了里海河沿线1 800英亩(约728hm2)的场地。1995年,伯利恒钢铁公司停止了炼钢业务,关闭了厂房,结束了当地悠久的工业历史,以及成千上万蓝领居民与工厂密不可分的生活模式。     

Discharge-based QMRA for estimation of public health risks from exposure to stormwater-borne pathogens in recreational waters in the United States

This study is the first to report a quantitative microbial risk assessment (QMRA) on pathogens detected in stormwater discharges-of-concern, rather than relying on pathogen measurements in receiving waters. The pathogen concentrations include seven “Reference Pathogens” identified by the U.S. EPA: Cryptosporidium, Giardia, Salmonella, Norovirus, Rotavirus, Enterovirus, and Adenovirus. Data were collected from 12 sites representative of seven discharge types (including residential, commercial/industrial runoff, agricultural runoff, combined sewer overflows, and forested land), mainly during wet weather conditions during which times human health risks can be substantially elevated. The risks calculated herein therefore generally apply to short-term conditions (during and just after rainfall events) and so the results can be used by water managers to potentially inform the public, even for waters that comply with current criteria (based as they are on a 30-day mean risk). Using an example waterbody and mixed source, pathogen concentrations were used in QMRA models to generate risk profiles for primary and secondary water contact (or inhalation) by adults and children. A number of critical assumptions and considerations around the QMRA analysis are highlighted, particularly the harmonization of the pathogen concentrations measured in discharges during this project with those measured (using different methods) during the published dose–response clinical trials. Norovirus was the most dominant predicted health risk, though further research on its dose–response for illness (cf. infection) is needed. Even if the example mixed-source concentrations of pathogens had been reduced 30 times (by inactivation and mixing), the predicted swimming-associated illness rates – largely driven by Norovirus infections – can still be appreciable. Rotavirus generally induced the second-highest incidence of risk among the tested pathogens while risks for the other Reference Pathogens (Giardia, Cryptosporidium, Adenovirus, Enterovirus and Salmonella) were considerably lower. Secondary contact or inhalation resulted in considerable reductions in risk compared to primary contact. Measurements of Norovirus and careful incorporation of its concentrations into risk models (harmonization) should be a critical consideration for future QMRA efforts. The discharge-based QMRA approach presented herein is particularly relevant to cases where pathogens cannot be reliably detected in receiving waters with detection limits relevant to human health effects.     

Enhanced performance of counter flow SOFC with partial internal reformation

We study a counter-flow solid oxide fuel cell system and consider the challenges faced in minimizing thermal variations from the nominal operating conditions for a reasonable range of power tracking. Blower dynamics, reformer transport delays, spatial distribution of the heat generated and the resulting thermal response are among the issues considered. A novel approach, relying on partial internal reformation of the feedstock is proposed as a remedy to maintain a strong level of power tracking with minimal thermal stress to the fuel cell.     

Anion structural effects on interaction of rare earth element ions with Dowex 50W X8 cation exchange resin

The effect of the anion in the original rare earth element(REE) solution on the reversible ion exchange of Ce nitrate and Ce sulfate with the Dowex 50 W X8 was investigated using attenuated total reflection infrared(ATR-IR) spectroscopy, continuous flow reactor studies coupled with inductively coupled plasma mass spectroscopy(ICP-MS), and density functional theory(DFT). The simulated IR spectrum at the DFT B3 LYP/6-31 G(d) level was compared to the experimental results to characterize the IR spectrum, molecular interactions, and bonding of the ion exchanged species. The continuous liquid flow reactor studies show a capacity of 0.72 mmol/g sorbent for the Ce nitrateand 0.96 mmol/g sorbent for the Ce sulfate with the Dowex 50 W X8. The flow reactor studies reveal the type of solute anion(SO_4~((2-)) or NO_3~((-))) associated with the REE during cation exchange significantly affects the sorption capacity of the Dowex 50 W X8 ion exchange resin. The calculated REE binding energy(BE) and the DFT optimized structures suggest that the differences in sorption capacity is the result of the formation of different types of partially ionexchanged Ce_2~((3+))2 SO_4~((2-)) and Ce~((3+)) 3 NO_3~((-)). These results suggest that the solute anion affects the equilibrium constants of the Dowex resin by the formation of a charged layer capable of retaining the counterion. Modifying the sulfonic acid site(H+) in the Dowex 50 W X8 with the NH_4~+ counterion does not affect the sorption capacity and retention times of the Ce nitrate and Ce sulfate species. These results suggest that the counterions and co-ions having a finite size, may limit access to the Dowex sulfonate active site where the type of REE cation as a nitrate or sulfate in solution may significantly modify the sorption capacity of the ion exchange resin. Similar results are obtained during sorption with nitrates and sulfates of Sm and Yb.     

The Ultrafast Laser Pump-Probe Technique for Thermal Characterization of Materials With Micro/Nanostructures

Advances in nano-electronics, nano-optics, energy harvesting materials, and nanoparticle-based photothermal therapies are motivating studies of the thermal properties of micro/nanostructures. Thus, the demands for highly sensitive and accurate thermal measurement techniques are encouraged for both fundamental studies and industrial applications. The time-domain thermoreflectance (TDTR) method, based on an ultrafast pump-probe technique, enables high-fidelity thermal measurements at the micro/nanoscale and the observation of dynamic processes with sub-picosecond time resolution. TDTR is an optical technique, capable of measuring the thermal properties of micro/nanostructures, including thermal conductivity and interfacial thermal conductance of bulk substrates, thin films, and nanoparticles, among others. Here we review some recent developments in the state-of-the-art ultrafast pump-probe method applied to study the thermal and magnetic properties of materials at the micro- and nanometer scales. We also discuss in detail improvements to this technique by presenting several example extensions to its capabilities.     

FlexiSketch: a lightweight sketching and metamodeling approach for end-users

Software and Systems Modeling - Engineers commonly use paper and whiteboards to sketch and discuss ideas in early phases of requirements elicitation and software modeling. These physical media...