The effect of rice bran on physicochemical,textural and glycaemic properties of ready-to-eat extruded corn snacks

In this work, corn extruded snack products were enriched with rice bran (RB) at 10% and 15%. A co-rotating twin-screw extruder was used with a feed moisture content of 16 g 100 g⁻¹, a screw speed of 240 r.p.m. and four heating sections of the barrel (100, 140, 150 and 150 °C). The impact of RB inclusion on nutritional profile, starch digestion, physicochemical and textural properties of snack products was evaluated. RB-enriched extrudates showed a lower specific volume and hardness and higher crispness than control. RB at 15% gave a water-holding capacity lower than control. Rheology of extrudate dispersions indicated an increase in elastic interactions and solid-like behaviour with RB supplementation. Differences in rheological properties resulted in attenuation of predictive glycaemic response for RB-enriched snacks.     

Solid state reactions between SiC and Ir

Reactivity between SiC and Ir as a function of SiC-crystallinity was investigated by diffusion bonding technique under a vacuum and over the temperature range of 1200–1450 °C. As reaction products, various Ir-silicides and free unreacted-C were detected. Reactivity is strongly affected by the temperature and SiC-crystallinity involving a series of interactions, from “no reaction” to “massive exothermic reactions”. In particular, interfacial phenomena are more pronounced by the presence of defects and grain boundaries.Solid state reactions result in formation of fine C-precipitates rearranged in a quasi-periodic microstructure. On the contrary, clustering of highly ordered C-precipitates (C-graphitized) occurs after “massive reactions” take place.A relationship between the degree of graphitization (from 1 to multi-layers of graphene), temperature and SiC crystallinity was found by Raman spectroscopy. 2D-layering phenomenon is enhanced in polycrystalline SiC at high temperature.     

A Sensitivity-Based Design Space Exploration Methodology for Embedded Systems

In this paper, we propose a system-level design methodology for the efficient exploration of the architectural parameters of the memory sub-systems, from the energy-delay joint perspective. The aim is to find the best configuration of the memory hierarchy without performing the exhaustive analysis of the parameters space. The target system architecture includes the processor, separated instruction and data caches, the main memory, and the system buses. To achieve a fast convergence toward the near-optimal configuration, the proposed methodology adopts an iterative local-search algorithm based on the sensitivity analysis of the cost function with respect to the tuning parameters of the memory sub-system architecture. The exploration strategy is based on the Energy-Delay Product (EDP) metric taking into consideration both performance and energy constraints. The effectiveness of the proposed methodology has been demonstrated through the design space exploration of a real-world case study: the optimization of the memory hierarchy of a MicroSPARC2-based system executing the set of Mediabench benchmarks for multimedia applications. Experimental results have shown an optimization speedup of 2 orders of magnitude with respect to the full search approach, while the near-optimal system-level configuration is characterized by a distance from the optimal full search configuration in the range of 2%.     

DILIGENT: integrating digital library and Grid technologies for a new Earth observation research infrastructure

This paper introduces DILIGENT, a digital library infrastructure built by integrating digital library and Grid technologies and resources. This infrastructure allows different communities to dynamically build specialised digital libraries capable to support the entire e-Science knowledge production and consumption life-cycle by using shared computing, storage, content, and application resources. The paper presents some of the main software services that implement the DILIGENT system. Moreover, it exemplifies the provided features by presenting how the DILIGENT infrastructure is being exploited in supporting the activity of user communities working in the Earth Science Environmental sector. This work is partially funded by the European Commission in the context of the DILIGENT project, under the 2nd call of FP6 IST priority.     

The AFLATOX® Project: Approaching the Development of New Generation,Natural-Based Compounds for the Containment of the Mycotoxigenic Phytopathogen Aspergillus flavus and Aflatoxin Contamination

The control of the fungal contamination on crops is considered a priority by the sanitary authorities of an increasing number of countries, and this is also due to the fact that the geographic areas interested in mycotoxin outbreaks are widening. Among the different pre- and post-harvest strategies that may be applied to prevent fungal and/or aflatoxin contamination, fungicides still play a prominent role; however, despite of countless efforts, to date the problem of food and feed contamination remains unsolved, since the essential factors that affect aflatoxins production are various and hardly to handle as a whole. In this scenario, the exploitation of bioactive natural sources to obtain new agents presenting novel mechanisms of action may represent a successful strategy to minimize, at the same time, aflatoxin contamination and the use of toxic pesticides. The Aflatox^® Project was aimed at the development of new-generation inhibitors of aflatoxigenic Aspergillus spp. proliferation and toxin production, through the modification of naturally occurring molecules: a panel of 177 compounds, belonging to the thiosemicarbazones class, have been synthesized and screened for their antifungal and anti-aflatoxigenic potential. The most effective compounds, selected as the best candidates as aflatoxin containment agents, were also evaluated in terms of cytotoxicity, genotoxicity and epi-genotoxicity to exclude potential harmful effect on the human health, the plants on which fungi grow and the whole ecosystem.     

A vision towards Scientific Communication Infrastructures

The two pillars of the modern scientific communication are Data Centers and Research Digital Libraries (RDLs), whose technologies and admin staff support researchers at storing, curating, sharing, and discovering the data and the publications they produce. Being realized to maintain and give access to the results of complementary phases of the scientific research process, such systems are poorly integrated with one another and generally do not rely on the strengths of the other. Today, such a gap hampers achieving the objectives of the modern scientific communication, that is, publishing, interlinking, and discovery of all outcomes of the research process, from the experimental and observational datasets to the final paper. In this work, we envision that instrumental to bridge the gap is the construction of “Scientific Communication Infrastructures”. The main goal of these infrastructures is to facilitate interoperability between Data Centers and RDLs and to provide services that simplify the implementation of the large variety of modern scientific communication patterns.     

Influence of participation, facilitator styles, and metacognitive reflection on knowledge building in online university courses

Understanding how to foster knowledge building in online and blended learning environments is a key for computer-supported collaborative learning research. Knowledge building is a deeply constructivist pedagogy and kind of inquiry learning focused on theory building. A strong indicator of engagement in knowledge building activity is the socio-cognitive dynamic of epistemic agency, in which students exercise a higher level of agency for setting forth their ideas and negotiating fit with those of others rather than relying on their teacher. The purpose of this paper is to investigate the influence of (a) levels of participation, (b) facilitator styles and (c) metacognitive reflection on knowledge building in two blended, post-secondary education contexts. A study of a total of 67 undergraduate students suggest that high levels of participation, a supportive facilitator style, and ample opportunities for metacognitive reflection on the students’ own participation strategies are most conducive for fostering epistemic agency for knowledge building. Implications of these results for research and instructional design of online courses are discussed.     

A covert attention P300-based brain-computer interface: Geospell

The Farwell and Donchin P300 speller interface is one of the most widely used brain-computer interface (BCI) paradigms for writing text. Recent studies have shown that the recognition accuracy of the P300 speller decreases significantly when eye movement is impaired. This report introduces the GeoSpell interface (Geometric Speller), which implements a stimulation framework for a P300-based BCI that has been optimised for operation in covert visual attention. We compared the Geospell with the P300 speller interface under overt attention conditions with regard to effectiveness, efficiency and user satisfaction. Ten healthy subjects participated in the study. The performance of the GeoSpell interface in covert attention was comparable with that of the P300 speller in overt attention. As expected, the effectiveness of the spelling decreased with the new interface in covert attention. The NASA task load index (TLX) for workload assessment did not differ significantly between the two modalities. PRACTITIONER SUMMARY: This study introduces and evaluates a gaze-independent, P300-based brain-computer interface, the efficacy and user satisfaction of which were comparable with those off the classical P300 speller. Despite a decrease in effectiveness due to the use of covert attention, the performance of the GeoSpell far exceeded the threshold of accuracy with regard to effective spelling.     

Water soluble trehalose-derived oligoamides

A new family of oligotrehaluronamides was synthesized through the polycondensation of α,α-trehaluronic acid dimethyl ester and different diamines or polyamines. In particular, diamines with different molecular structure (1,n-alkylene diamines, aromatic diamine, and alkyleneoxydiamine) were used in order to modulate the molecular weights and the physical characteristics of the products, such as T_g, hydrophilic or hydrophobic properties, and solubility. α,α-Trehaluronic acid was obtained from a renewable source as α,α-trehalose. The syntheses of oligotrehaluronamides were carried out in different solvents such as ethanol, methanol, THF and DMSO, using triethylamine as catalyst. All the compounds obtained in this study were characterized through FT-IR and NMR spectroscopy. The molecular weights were evaluated by ¹H-NMR and in some cases compared with those obtained from ESI-MS spectrometry. Glass transition temperatures and melting points were detected by differential scanning calorimetry. Low molecular weight oligoamides, containing several hydroxyl groups, are water-soluble and could be used in water-based formulations.     

Mo–Si–B alloys for ultra-high-temperature space and ground applications: liquid-assisted fabrication under various temperature and time conditions

Journal of Materials Science - Boron-doped molybdenum silicides have been already recognized as attractive candidates for space and ground ultra-high-temperature applications far beyond limits of...