Synthesis,Structural and Biomedical Characterization of Hydroxyapatite/Borosilicate Bioactive Glass Nanocomposites

Journal of Inorganic and Organometallic Polymers and Materials - In this work, a borosilicate glass sample (5SiO2–45B2O3–20Na2O–25CaO–5Ag2O) was added to nano-sized...     

Quality and nutritional characteristics of traditional curd cheese enriched with thermo-coagulated acid whey protein and indigenous Lactococcus lactis strain

Consumer interest in a healthy lifestyle and health-promoting natural products is a major driving force for the increasing global demand for bio-functional and sustainable dairy foods. Supplementation of curd cheese with thermo-coagulated acid whey protein (TAWP) led to 8–10% higher contents of moisture, 23–31% of lactose, 12–13% of unsaturated, 5–6% of monounsaturated, 63% of polyunsaturated, and 3–4% of long-chain fatty acids. Lipid quality indices – TI, AI, h/H, and Omega 6/3 among others, were also significantly better than those of control cheese. The addition of indigenous Lactococcus lactis strain enhanced the flavour of cheese samples, decreased the counts of yeast and mould up to 1 log cfu g⁻¹ after 10 days of storage. The replacement of curd with TAWP resulted in novel cheese with overall sensory perception above 77 points and added nutritional and functional value, however, body and texture parameters of modified cheese samples require an improvement.     

Hydrogel wound dressings based on chitosan and xyloglucan: Development and characterization

Xyloglucan is a polysaccharide isolated from chia seed gum (Salvia hispanica L.) and can act as a soluble fiber. In this investigation, several porous hydrogels were prepared from mixtures of chitosan and xyloglucan. To characterize these biomaterials, their mechanical, hydrophilic, structural, and morphological properties were measured, as well as their biodegradability and antimicrobial activity. The pore sizes of the porous hydrogels were 32.8–101.6 μm, and their water retention capacity is proportional to the added amount of xyloglucan. Dynamic degradation of the porous hydrogels with lysozymes showed progressive weight loss during the 14 days of testing. The mechanical properties improved slightly after the addition of xyloglucan. All of these results indicate that the incorporation of vegetable-derived polymers such as xyloglucan improves the properties of chitosan without affecting its antimicrobial capacity. Thus, biomaterials based on chitosan and xyloglucan are a promising option for the design of hydrogel wound dressings for medical applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47342.     

Photocatalytic Synthesis of p-Anisaldehyde in a Mini Slurry-Bubble Reactor under Solar Light Irradiation

Dense photocatalyst slurry was employed for the synthesis of p-anisaldehyde under solar light irradiation. An Fe-modified rutile TiO ₂ (Fe-TiO _2, 34.5 m ²/g) photocatalyst was used as a visible-light-responsive photocatalyst. A conventional TiO ₂ (P25, 35 m ²/g) photocatalyst was also examined as a reference catalyst. XRD patterns and diffuse reflectance spectra showed that Fe-TiO ₂ consists of 100 % rutile phase and absorbs more visible light compared to P25, respectively. The catalyst powder was suspended in an ethyl acetate solution of p-methoxytoluene in the mini-reactor, with oxygen bubbling, under a solar simulator, visible light, and UV LEDs. p-anisaldehyde, as a reaction product, was analyzed by sampling using gas-chromatograph. Regardless of the light source, Fe-TiO ₂ always outperformed P25 in terms of both generation rates (GR) of p-anisaldehyde and energy requirements (ER). It was demonstrated that the highly dense Fe-TiO ₂ slurry was efficient for the synthesis under solar light owing to the small size of the reactor. The small amount of Pt and ZrO ₂ cocatalysts significantly enhanced the GR under solar light. By adopting a visible light responsive Fe-TiO ₂ photocatalyst, the mini slurry-bubble reactor under solar light achieved a high GR per catalyst mass (CM), which is one to two orders higher than that reported by most previous studies with high-power lamps.     

PV/batteries sizing and energy dispatching using Continuous Petri Net

Electrification of isolated area is commonly ensured by autonomous power installation including renewable energy sources. Many software tools are available to size such installations. These tools refer to the daily energy need and the site global renewable potential which leads to inaccurate and wasteful sizing. This paper presents an alternative tool based on the energy consumption and the daily loads profile to compute the size of a standalone PV/batteries system installed in an isolated chalet in Sfax, Tunisia. Obtained results are compared to those provided by PVsyst sizing tool to confirm the proposed algorithm effectiveness. Referring to obtained results, an assessment is proposed to dispatch energy between connected autonomous installations to cover the need of some houses by energy surplus offered by neighbors. A Continuous Petri Net (CPN) is used to model the energy flow between houses.     

Multivariate analysis of a biologically activated carbon (BAC) system and its efficiency for removing PAHs and aliphatic hydrocarbons from wastewater polluted with petroleum products

The efficiency of a biologically activated carbon system for treating wastewater polluted with petroleum products was examined and the effects of process parameters on its efficacy were evaluated. In each experiment 17 alkylated and 19 non-alkylated polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs, C₁₀–C₄₀) were extracted using semipermeable membrane devices from wastewater before and after treatment. The acquired data during experiments were analyzed using principal component analysis (PCA). The treatment system robustly removed dissolved PAHs across the studied ranges of the process parameters, providing overall removal efficiencies of 96.9–99.7% for the sum of 36 PAHs. However, the major contributor to their removal was sorption rather than biodegradation, and despite the general efficiency of the process there was up to a 9-fold range in the sums of quantified PAHs in the effluents between experiments. Combinations of long process contact time (24 h) with high temperature (24 °C) and moderate oxygen concentration (6–7 mg O₂ L⁻¹) resulted in good removal of bioavailable PAHs. The removal of TPHs was more dependent on biological activities during the wastewater treatment, and consequently more dependent on the process parameters. In addition, small but significant proportions of PAHs were volatilized and released during the wastewater treatment.     

External cost of electricity generation in Baltic States

This article deals with external cost of electricity generation in Baltic States. The costs of electricity generation and distribution are the most important criteria shaping decisions within the electricity system. However, the external cost due to air pollution should also be adequately taken into account seeking to promote new and clean technologies for electricity generation. External costs of electricity generation in the main power plants burning fossil fuel were calculated based on ExternE methodology for Baltic States during EU Framework 6 project CASES. The article presents the first results of external cost of electricity generation in Baltic States.     

Comparative assessment of future motor vehicles under various climate change mitigation scenarios

The aim of comparative assessment of future road transport technologies is to find the cheapest motor vehicles in terms of private and external Greenhouse Gas (GHG) emission costs under various international climate change mitigation scenarios in 2020 and 2050. The comparative assessment of the main road transport technologies ranging from conventional vehicles to hybrid electric vehicles was performed. The main indicators for comparative future motor vehicles assessment are: private costs and life cycle external costs of GHG emissions. The obtained ranking of road transport technologies allows to identify the most perspective future motor vehicles taking into account international climate change mitigation constraints and to promote these road technologies by policy tools. The cheapest road transport technologies in 2020 and 2050 are: the main results presented in this paper were obtained during EU financed Framework 7 project “PLANETS” dealing with probabilistic long-term assessment of new energy technology scenarios.     

SuretyAssist: Fuzzy Expert System to Assist Surety Underwriters in Evaluating Construction Contractors for Bonding

In construction, many owners mitigate the risk of unforeseen contractor default by accepting only bonded contractors who must endure a rigorous evaluation process by surety brokers and surety underwriters. This evaluation process includes a financial analysis and a review of work on hand and past performance, all of which have reliable structured methods for their evaluation. Additionally, a number of subjective criteria are considered that are more difficult to capture and assess objectively but which can be modeled effectively using fuzzy logic. The purpose of this paper is to illustrate how fuzzy logic and expert systems can be combined to provide a structured approach to evaluating contractors for surety underwriting purposes. Fuzzy logic is used to model both the objective and subjective factors considered in contractor evaluation using linguistic terms, and expert rules are used to capture the surety experts’ reasoning process. A fuzzy expert system, SuretyAssist, is presented that can be used to provide an initial evaluation of general contractors as well as periodic reviews to determine whether or not to accept them as clients for bonding. SuretyAssist was validated using 31 actual cases of contractor evaluation and found to be accurate in 81% of the cases.