Improvement of dielectric breakdown strength and energy storage performance in Er2O3–modified 0.95Sr0.7Ba0.3Nb2O6-0.05CaTiO3 lead-free ceramics

In this study, 0.95?Sr_0.7Ba_0.3Nb₂O₆-0.05CaTiO₃-x wt% Er₂O₃ ceramics (SBNCTEx; x?=?0–5) were synthesized using traditional solid-state method, and we investigated the microstructure, energy storage properties as well as the relationship between dielectric breakdown strength and interfacial polarization. As compared with pure 0.95?Sr_0.7Ba_0.3Nb₂O₆-0.05CaTiO₃ ceramics, the Er₂O₃ dopants suppressed the grain growth of SBNCTEx, and the doped ones showed the dense microstructure. The secondary phase was found for x?≥?1 according to the EDS results, and the influence of the secondary phase on relative dielectric breakdown strength has also been studied. The dielectric breakdown strength increased from 18.1?kV/mm to 34.4?kV/mm, which is good for energy storage. The energy storage density of 0.28?J/cm³ and the energy storage efficiency of 91.4% were obtained in the SBNCTE5 ceramics. The results indicate that SBNCTE ceramics can be used as energy storage capacitors.     

Stabilizing temperature-capacitance dependence of (Sr,Pb, Bi)TiO3-Bi4Ti3O12 solutions for energy storage

(1-x)Sr_0.7Pb_0.15Bi_0.1TiO₃-xBi₄Ti₃O₁₂ ((1-x)SPBT-xBIT, x = 0-0.125) bulk ceramics were developed and calcined via the solid-state method, aimed at the application of pulsed power capacitors. The phase structures, temperature stability, hysteresis loop, and discharge properties were systematically investigated. Considering both the temperature stability and dielectric properties, 0.925SPBT-0.075BIT bulk ceramics with a capacitance variation satisfying the X7R specification were developed for pulsed power capacitors. The energy storage density was 0.252 J/cm³, and the ceramics showed high temperature stability at 80 kV/cm. The discharge current waveforms of the 0.925SPBT-0.075BIT ceramics were recorded. A high discharge power density of approximately 1.01 × 10⁸ W/kg with an 8 Ω load resistor and short discharge period of 84 ns were achieved at 50 kV/cm. The good temperature stability properties and high power density show that the 0.925SPBT-0.075BIT ceramics are well suited for pulsed power capacitors with a wide temperature range.     

Structural dependence of microwave dielectric properties of spinel structured Mg2(Ti1-xSnx)O4 solid solutions: Crystal structure refinement,Raman spectra study and complex chemical bond theory

Mg₂(Ti_1-xSn_x)O₄ (x?=?0–1) ceramics were prepared through conventional solid-state method. This paper focused on the dependence of microwave dielectric properties on crystal structural characteristics via crystal structure refinement, Raman spectra study and complex chemical bond theory. XRD spectrums delineated the phase information of a spinel structure, and structural characteristic of these compositions were achieved with the help of Rietveld refinements. Raman spectrums were used to depict the correlations between vibrational phonon modes and dielectric properties. The variation of permittivity is ascribed to the Mg₂(Ti_1-xSn_x)O₄ average bond covalency. The relationship among the B-site octahedral bond energy, tetrahedral bond energy and temperature coefficient are discussed by defining on the change rate of bond energy and the contribution rate of octahedral bond energy. The quality factor is affected by systematic total lattice energy, and the research of XPS patterns illustrated that oxygen vacancies can be effectively restrained in rich oxygen sintering process. Obviously, the microwave dielectric properties of Mg₂(Ti_1-xSn_x)O₄ compounds were obtained (${\epsilon }_r$= 12.18, $Q\times f$?=?170,130?GHz, ${\tau }_f$?=??53.1?ppm/°C, x?=?0.2).     

有限区间信号边界效应问题的研究

研究了截断信号边界的“吉布斯”现象及数字滤波器相位特性对有限区间信号滤波处理的影响，在阐明了有限区间信号处理中边界效应物理本质的基础上，探讨了数字信号处理中通常所采用的边界处理方法的有效性问题，提出了一种命名为端值延拓法的新的边界处理方法，通过比较分析和实例验证表明这种方法的优越性，文中以零相位数字滤波及运用MALLAT算法对有限区间信号进行小波分解与重构为实例，介绍了其边界效应问题及解决方案，取得了很好的效果。     

橡塑共混热塑性弹性体的形态结构与性能

综述了影响共混热塑性弹性体的形态结构与性能的主要因素。     

FBOLES—outline of a frequency-based on-line expert system approach for fault diagnoses in nuclear power plants

The basic concept of a novel frequency-based on-line expert system (FBOLES) approach for on-line fault diagnoses in nuclear power plants has been presented previously. This paper reports further progress, and includes how to express the uncertainties of expert opinion in knowledge-bases and propagate then in inferences, and how to deal with imperfect knowledge-bases. It also describes the main elements of FBOLES and outlines how the system works under complex conditions including the dynamic behavior of signals during accidents, multiple failures, and on-line changes of plant operation mode. Its ability to diagnose root causes of accidents has been tested using the main steam and feedwater condensate systems of a full-scale, three-loop, 950 MW nuclear power plant simulated by the Tsinghua simulator. So far the results seem good.     

钢水化学热法升温技术的研究

依据热力学原理，用计算机计算了某些元素与合金的氧化热效应。综述了各种上化学热法升温技术的应用效果。分析讨论了发热剂的类型，升温速度和热效率问题等。     

A large-scale experimental study on CO2 capture utilizing slurry-based ab-adsorption approach

The increasing concentration of CO_2 in atmosphere is deemed the main reason of global warming.Therefore,efficiently capturing CO_2 from various sources with energy conservation is of great significance.Herein,a series of experiments were carried out to successfully test the slurry-based ab-adsorption method for continuously capturing CO_2 in the large-scale cycled separation unit with cost-effect taking into account the scale-up criteria.A bubble column(with height 4900 mm and inner diameter 376 mm) and a desorption tank(with volume 310 L) are the essential components of the separation unit.The novel slurry used in this study was formed with zeolitic imidazolate framework-8 and 2-methylimidazole-water solution.The influence of operation conditions was investigated systematically.The results show that increasing sorption pressure and slurry height level,decreasing gas volume flow and sorption temperature are beneficial for separation processes.The volume fraction of CO_2 in the feed gas was also studied.Although the scale-up effect had been observed and it was found that it exerted a negative effect on CO_2 capture,depending on experimental conditions,CO_2 removal efficiency could still reach 85%-95% and the maximum CO_2 loading in the recycled slurry could be up to0.007 mol·L~(-1)·kPa~(-1).Furthermore,the slurry-based method could be operated well even under very moderate regeneration conditions(333 K and 0.05 MPa),which means that the novel approach shows greater energy conservation than traditional amine absorption methods.     

PAN－S与镉的显色反应及其应用

本文研究了１－（２－吡啶偶氮）－２－萘酚－磺酸（ＰＡＮ－Ｓ）与镉的显色条件．在ｐＨ为１０的缓冲介质中显色，配合物的最大吸收峰位于５３６ｎｍ波长处，表现摩尔吸光系数ε＝２．９×１０４Ｌ·ｍｏｌ－１·ｃｍ－１．镉量在０～５０μｇ／２５ｍＬ范围内符合比耳定律．用巯基棉分离水中的常见离子富集镉，选择性好．本方法用于工厂排放水中微量镉的测定，结果今人满意．     

浙江省硫酸工业进展

介绍近6年来浙江省的硫酸产能和产量及下游耗酸产业结构.浙江省2005年硫酸产量占全国总产量的3%,预计2006年产量将达到1 600 kt.建议缓建硫酸装置,积极发展耗酸行业,控制进口酸量,加强企业间的协调,以使浙江省的硫酸市场在新的供需形势下建立起新的平衡.