Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

An alternative formulation of the geometric stiffness matrix for plate elements

A simplified formulation of the geometric stiffness matrix for plate elements is presented. In this formulation the transverse displacement is defined along the element boundary but not for the element interior as with the usual formulation. As such the formulation is particularly suitable for use with hybrid stress or discrete Kirchhoff methods which are also based on boundary approximation of the transverse displacement.

The simplicity, computational economy and accuracy obtained with the formulation compare favorably with the usual order formulation.     

Diffusion with simultaneous immobilization in polymer–dye systems. I. Diffusion of the cationic dye anilana red BL in the anionically modified polyester fiber dilana

The diffusion coefficient of the cationic dye Anilana Red BL in the anionically modified polyester fiber Dilana has been calculated regarding a general diffusion-immobilization model. In the model the mobile species are distinguished from the immobilized ones. In computations of Sand's equation and experimentally determined sorption isotherm of the dye in the fiber, the rate-of-dyeing curve and the concentration profiles of the dye in the same fiber were employed. The diffusion coefficient of the mobile species of Anilana Red BL in the fiber is two orders of magnitude higher than the average diffusion coefficient obtained from Hill's equation and the apparent diffusion coefficient calculated by the Boltzmann–Matano method.     

Bioactive compounds in rye flours with different extraction rates

Rye flours with extraction rate of 100% (wholemeal flour), 95% (brown flour), 90% (brown flour) and 70% (light flour) were prepared in order to study the relation between flour extraction rates and content of bioactive compounds. The following compounds were analysed: total phenolic compounds (TPC), total flavonoids (TF), inositol hexaphosphate (IP6), reduced (GSH) and oxidized (GSSG) glutathione, tocopherols (T) and tocotrienols (T3). The reduced/oxidized glutathione status (GSH/GSSG) of the flours was examined as a potential index of flour resistance against oxidative stress. The following observations were made in relation to the flour extraction rates and bioactive compounds contents: (a) milling process caused decrease in content in TPC, TF, IP6, GSH and GSSG, T and T3, (b) the most resistant against oxidation processes were suggested a brown flours, then light and finally wholemeal flour, (c) the ratio of tocotrienols to tocopherols (T3/T) was the highest in rye flours with extraction rate of 100–90% whereas light flour was the poorest source of tocopherols and tocotrienols. The provided data support current trend to increase number of rye products from wholemeal or brown flours.     

Studies of porous polymer gels. I. One-step suspension technique for preparation of moderately crosslinked methacrylic acid gels

A new method of preparation of carboxyl cation exchangers directly from methacrylic acid and divinylbenzene is described. A suspension technique with a concentrated aqueous calcium chloride solution as the water phase was used. n-Octane and toluene were inert diluents of the monomers. The copolymers obtained have high ion-exchange capacity (9.6–10.6 mequ./g) and porous structure.     

One-dimensional axial simulation of electric double layer overlap effects in devices combining micro- and nanochannels

This paper presents a numerical steady-state model of ion transport in micro- and nanofluidic devices with widely varying geometric scale, such as transitions between micro- and nanochannels. Finite element or finite volume simulation of such problems is challenging, due to the number of elements needed to produce a satisfactory mesh. Here, only the lengthwise channel dimension is meshed; standard analytical approximations are used to incorporate cross-channel properties. Singularly perturbed cases are built up by continuation. The method is shown to reproduce our previously reported measurements of electric double-layer effects on conductivity, ion concentration, and ion enhancement and depletion. Comparison with 2-D simulations reported in the literature shows that effects on accuracy due to the 1-D approximation are small. The model incorporates analytical models of surface charge density taken from the literature. This enables predictive simulation with reasonable accuracy using published parameter values, or these values may be tuned based on experiment to give improved results. Use of the model for iterative design and parameter estimation is demonstrated.     

Effect of nitrogen and vanadium on austenite grain growth kinetics of a low alloy steel

Austenite grain growth kinetics in a steel containing 0.4% C, 1.8% Cr with different nitrogen contents (in the range 0.0038–0.0412%) and a micralloying addition of 0.078% V were investigated. The investigations were carried out in an austenitising temperature range of 840–1200 °C for 30 min. The results of investigations showed that N promotes the grain growth of austenite. The microalloying addition of vanadium protects the austenite grain growth because of carbonitride V(C,N) precipitation and the grain boundary pinning effect of undissolved particles of V(C,N). Using a thermodynamic model, the carbonitride V(C,N) content, undissolved at the austenitising temperature was calculated. At temperatures when a coarsening and dissolution of carbonitride occurs, the austenite grains start to growth. The effect of nitrogen on the type of chord length distribution of austenite grains was analysed.     

Predicting Occupational Coping Responses: The Interactive Effect of Gender and Work Stressor Context.

This study examined whether gender and work stressor context interacted to affect reports of occupational coping strategies. Participants (N=113) were asked to indicate how they would cope with both self-focused (i.e., solitary) and interpersonal (i.e., group) work overload contexts by providing responses to the Cybernetic Coping Scale (J. Edwards & A. J. Baglioni, 1993). Consistent with the hypothesized interaction, male and female participants evidenced similar coping strategies in the self-focused work overload context, whereas female participants showed significantly higher use of coping (T2=.08, p     

Influence of hydrodynamic instability on the heat transfer coefficient during condensation of R134a and R404A refrigerants in pipe mini-channels

This paper presents the results of an investigation of the influence of hydrodynamic instabilities on heat transfer intensity during the condensation of R134a and R404A refrigerants in pipe mini-channels. The heat transfer coefficient h is a measure of the effectiveness of the condensation process. It is particularly important to determine the value of the coefficient in the two-phase condensation area in a compact condenser. In other condenser areas (i.e., precooling of superheated vapor and subcooling of condensate), the heat efficiency is substantially smaller. Hydrodynamic instabilities of a periodic nature have an influence on size changes in these areas. A decrease in the heat transfer coefficient h in the two-phase area results in decreased intensity of the heat removal process in the whole condenser.The experimental investigations were based on the condensation of R134a and R404A refrigerants in horizontal pipe mini-channels with internal diameters of d = 0.64; 0.90; 1.40; 1.44; 1.92; 2.30 and 3.30 mm. Disturbances of the condensation process were induced with a periodic stop and a repetition of the flow of the refrigerant.In the range of frequencies, f = 0.25–5 Hz, of the periodically generated disturbances, an unfavorable influence on the intensity of the heat transfer during the condensation process in pipe mini-channels was identified. The reduction in the intensity of the heat transfer during the condensation process, which was induced with hydrodynamic instabilities, was presented in the form of the dependence of the heat transfer coefficient h on the vapor quality x and the frequencies f of the disturbances.The influence of the refrigerant, the diameter of the mini-channels and the frequency f on the damping phenomenon of the periodical disturbances in the pipe mini-channels was identified.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry