Fabrication of flexible interdigitated μ-electrodes (FIDμEs) for the development of a conductimetric immunosensor for atrazine detection based on antibodies labelled with gold nanoparticles

The present paper describes a simple and low-cost method for the fabrication of mechanically flexible interdigitated μ-electrodes (FIDμEs) and its application as immunosensor.FIDμEs consist of two coplanar non-passivated interdigitated metallic μ-electrodes supported on a flexible transparent substrate, polyethylene naphthalate (PEN). Bioreagents deposition on PEN substrates becomes possible by depositing SiO₂ on the electrodes surface (fingers and inter-digits space).These FIDμEs were successfully applied for the development of a selective conductimetric immunosensor for the quantification of atrazine residues. The immunosensor has been demonstrated for detection of small amounts of atrazine, thanks to the use of immunoreagents specifically developed to detect this pesticide.The detection method applied is based on the use of antibodies labelled with gold nanoparticles. The presence of these particles amplifies the conductive signal; hence the immunosensor response was quantified using simple and inexpensive DC measurements.Immunochemical detection of the concentrations of atrazine is achieved by a competitive reaction which occurs before the inclusion of the labelled antibodies.The immunosensor shows limits of detection in the order of 2-3 μg L⁻¹, far below the maximum residue level (50 μg kg⁻¹) established by EU for residues of atrazine as herbicide in the wine grapes and other foodstuff products.     

Nonlinear Refraction and Absorption in 4BCMU Planar Waveguides at 1·064 μm Wavelength

Abstract

We have measured the nonlinear refractive index, n ₂, and two-photon absorption coefficient, β, in 4BCMU planar waveguides at 1·064 μm wavelength using picosecond pulses. We use a beam propagation code, with n ₂ and β as fitting parameters, to make numerical comparison with the experimental data. Deduced values from this analysis are n₂ = ? 1·5 × 10^?13 cm²W^?1, confirming the negative sign of the nonlinearity at this wavelength, and β = 0·01 cm MW^?1.     

Meat and fat quality of unweaned lambs as affected by slaughter weight and breed

Sixty-four male lambs of two Southern Spanish breeds, a dairy breed (Grazalema Merino) and a meat breed (Churra Lebrijana), were used to study the effects of slaughter weight and breed on meat traits and intramuscular and subcutaneous fat composition. Lambs were reared following a traditional production system without weaning and slaughtered when live weight reached 12 kg (suckling) or 20 kg (light). Meat from suckling lambs of both breeds had lower fat and myoglobin contents, and was more tender and had higher scores for sustained juiciness in the sensory analysis. Fat from light lambs had lower C12:0 and C14:0 levels than fat from suckling lambs. Grazalema Merino meat had higher fat and ash contents, and its fat had higher conjugated linoleic acid content than Churra Lebrijana meat.     

Estimation of factors influencing fatty acid profiles in light lambs

Fatty acid composition of intramuscular, intermuscular, subcutaneous, omental and kidney knob fat depots of eighty male light lambs (±21 kg live weight) from five Spanish sheep breeds was analysed. Fat depot, anatomical depot location (internal, external and intramuscular), breed (Spanish Merino, Grazalema Merino, Churra Lebrijana, Segureña and Montesina), weaning type (weaning at 45 days after birth or no weaning) and subcutaneous fat thickness factors were analyzed using a statistical model to quantify their contribution to the variation of each fatty acid. Production system was the main factor to explain variations in overall fatty acid profiles (34.68%). However, for several fatty acids and indices (arachidonic, linoleic, PUFA, n − 3/n − 6) anatomical depot location was the most significant factor. Feeding system explained 65.49% of CLA variance, indicating a strong influence of suckling period length on CLA deposition in lambs’ fat. Moreover, due to the lack of interaction between anatomical depot location or depot and breed type or weaning system for total CLA, for future research only one depot would be enough to study the effect of those factors on CLA levels.     

Reliability of coding of diagnoses recorded in the computerized information system at primary health care centers

OBJECTIVE: To find the reliability of the coding of diagnoses in the doctor's note in this computer system and to analyse where there are most discrepancies. DESIGN: An observational study. The concordance between the reason for consultation, codified by an external assessor, and the coding of the main diagnosis. SETTING: Health Districts 17 (Murcia/Barrio del Carmen) and 66 (Molina de Segura/La Ribera) in the Autonomous Community of Murcia. PATIENTS: A sub-sample of 228 consultations, belonging to a larger study of 1,904 general medical consultations (total: 98,768 consultations). MEASUREMENTS AND MAIN RESULTS: There were discrepancies between the coding of the reason for consultation and the diagnosis in 23% of the consultations recorded. The reason for consultation was not correctly recorded in 12.3%. The diagnostic group or section with the highest level of agreement was number XVIII or the supplementary section; and with the least agreement in XVII (injuries and adverse side-effects) and Number V covering mental disorders. CONCLUSIONS: Quality control of information and its validation enables errors and problems in the systems to be identified and corrected. This study points to the need to improve the filling-out of the reason for consultation and activity carried out, in order to obtain afterwards a more reliable coding of the diagnosis.     

A Planar Waveguide Nd:YAG Laser Using Active Q-Switching of a Hybrid Unstable Resonator

A planar waveguide laser operating in a negative branch unstable resonator is Q-switched by an acoustooptic modulator in a new configuration, providing effective, high-speed switching. The laser using a 200-mum Nd:YAG core, face pumped by 10 laser diode bars, has produced 100-W output in a good beam quality at 100-kHz pulse rate, and 4.5 mJ at lower frequency with 15-ns pulse duration.     

Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization

The influence of granulometry and organic treatment of a Brazilian montmorillonite (MMT) clay on the synthesis and properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites was studied. Hybrid latexes of poly(styrene‐co‐butyl acrylate)/MMT were synthesized via miniemulsion polymerization using either sodium or organically modified MMT. Five clay granulometries ranging from clay particles smaller than 75 μm to colloidal size were selected. The size of the clay particles was evaluated by specific surface area measurements (BET). Cetyl trimethyl ammonium chloride was used as an organic modifier to enhance the clay compatibility with the monomer phase before polymerization and to improve the clay distribution and dispersion within the polymeric matrix after polymerization. The sodium and organically modified natural clays as well as the composites were characterized by X‐ray diffraction analysis. The latexes were characterized by dynamic light scattering. The mechanical, thermal, and rheological properties of the composites obtained were characterized by dynamical‐mechanical analysis, thermogravimetry, and small amplitude oscillatory shear tests, respectively. The results showed that smaller the size of the organically modified MMT, the higher the degree of exfoliation of nanoplatelets. Hybrid latexes in presence of Na‐MMT resulted in materials with intercalated structures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Genetic and transcriptomic evidences suggest ARO10 genes are involved in benzenoid biosynthesis by yeast

Benzenoids are compounds associated with floral and fruity flavours in flowers, fruits and leaves and present a role in hormonal signalling in plants. These molecules are produced by the phenyl ammonia lyase pathway. However, some yeasts can also synthesize them from aromatic amino acids using an alternative pathway that remains unknown. Hanseniaspora vineae can produce benzenoids at levels up to two orders of magnitude higher than Saccharomyces species, so it is a model microorganism for studying benzenoid biosynthesis pathways in yeast. According to their genomes, several enzymes have been proposed to be involved in a mandelate pathway similar to that described for some prokaryotic cells. Among them, the ARO10 gene product could present benzoylformate decarboxylase activity. This enzyme catalyses the decarboxylation of benzoylformate into benzaldehyde at the end of the mandelate pathway in benzyl alcohol formation. Two homologous genes of ARO10 were found in the two sequenced H. vineae strains. In this study, nine other H. vineae strains were analysed to detect the presence and per cent homology of ARO10 sequences by PCR using specific primers designed for this species. Also, the copy number of the genes was estimated by quantitative PCR. To verify the relation of ARO10 with the production of benzyl alcohol during fermentation, a deletion mutant in the ARO10 gene of Saccharomyces cerevisiae was used. The two HvARO10 paralogues were analysed and compared with other α-ketoacid decarboxylases at the sequence and structural level.