Investigations of a two-wave laser refractometer

A two-wave laser interference refractometer for measuring the refractive index of air, pure gases, and gaseous mixtures is described. An algorithm for calculating the results of measurements using the method of coincidence of fractional parts of the orders of interference is given.Translated from Izmeritel'naya Tekhnika, No. 7, pp. 29–31, July, 1993.     

Cardioinotropic Effects in Subchronic Intoxication of Rats with Lead and/or Cadmium Oxide Nanoparticles

Subchronic intoxication was induced in outbred male rats by repeated intraperitoneal injections with lead oxide (PbO) and/or cadmium oxide (CdO) nanoparticles (NPs) 3 times a week during 6 weeks for the purpose of examining its effects on the contractile characteristics of isolated right ventricle trabeculae and papillary muscles in isometric and afterload contractions. Isolated and combined intoxication with these NPs was observed to reduce the mechanical work produced by both types of myocardial preparation. Using the in vitro motility assay, we showed that the sliding velocity of regulated thin filaments drops under both isolated and combined intoxication with CdO–NP and PbO–NP. These results correlate with a shift in the expression of myosin heavy chain (MHC) isoforms towards slowly cycling β–MHC. The type of CdO–NP + PbO–NP combined cardiotoxicity depends on the effect of the toxic impact, the extent of this effect, the ratio of toxicant doses, and the degree of stretching of cardiomyocytes and muscle type studied. Some indices of combined Pb–NP and CdO–NP cardiotoxicity and general toxicity (genotoxicity included) became fully or partly normalized if intoxication developed against background administration of a bioprotective complex.     

Gas permeation of polymer blends. III. Poly(vinyl chloride) (PVC)/chlorinated polyethylene (CPE)

The permeability P, diffusivity D, and activation energy for diffusion, E_D, of He, O₂, N₂, and CO₂ were determined for blends of PVC/chlorinated polyethylene (CPE), where the chlorine content of the CPE components varied: 36 wt-% for CPE-1, 42 wt-% for CPE-2, and 48 wt-% for CPE-3. The difference in thermal expansion coefficients Δα above and below the glass transition temperature T_g of the polymers and the fractional free volume V_g of the polymers at their T_g were determined. Density and crystallinity measurements for the blends were also carried out as in the earlier work (Shur and Rånby, J. Appl. Polym. Sci., 19 , 1337 (1975)). Dynamic mechanical measurements of the blends were made using a torsion pendulum at about 1 Hz. P and D decreased, but E_D increased with increasing CI content of CPE in the blends. P and D for the blends showed no additivity. The permeability indicated phase inversion for blend compositions at about 10% of CPE-1 and CPD-2 by weight. The experimental and the calculated densities were largely the same for PVC/CPE-1 blends; but for PVC/CPE-2 and PVC/CPE-3 blends, the experimental values were higher than the calculated ones. The Δα and V_g values for PVC and the three CPE samples decreased with increasing CI content in the polymers. Dynamic mechanical measurements indicate that PVC/CPE-1 and PVC/CPE-2 blends form largely incompatible blends, while PVC/CPE-3 blends are compatible to some extent. There is some weak interaction between PVC and CPE-3 giving a low level of compatibility. The solubility of gases obtained from time-lag measurements of diffusion for 50/50 blends decreased for He, O₂, and N₂, but increased for CO₂ with increasing Cl content in CPE. The solubility of He, O₂ and N₂ shows a positive correlation with the Lennard-Jones force constant ?/k. However, a deviation from the linear relation between ?/k and In S was observed for CO₂ and the deviation became larger with increasing Cl content in CPE. The abnormally high solubility of CO₂ is probably due to the high polarizability of this gas. The heat of solution ΔH_s indicates that for He the sorption process may be a molecular slip process (endothermic), but for other gases the sorption may proceed by a dissolution process (exothermic). There is a large difference between the calculated solubility for the blends assuming incompatibility and the experimental values from time-lag measurements. This may partly be due to the uncertainty of sorption values obtained from the time-lag method and/or partly to changes of sorption modes by interaction between PVC and CPE in the blends. The resulting transport behavior of the blends is discussed on the basis of the free volume concept and of phase–phase interaction in the blends.     

Phase relations in poly(vinyl chloride)/ethylene--vinyl acetate copolymer blends with low contents of the EVA polymer

A series of polymer blends of commercial poly(vinyl chloride) (suspension-polymerized powder) and an ethylene–vinyl acetate copolymer (EVA with 45 wt % VA) containing 2–10 wt % EVA were prepared by mixing at room temperature (0) and by milling at 160°C for 15 min (I) and then heat treated at 170°C for 20 min (II) and 40 min (III). Wide-line NMR measurements for protons at room temperature show a broad band (assigned to PVC phase) and a superimposed narrow band (assigned to mobile EVA phase). The 0-samples had a narrow band intensity corresponding to the total EVA content; the I-samples had a less intense narrow band than expected, indicating that 2–3% EVA was included in the rigid PVC phase. Heat treatment for 20 min (II) and 40 min (III) increased the narrow band intensity toward the 0-samples showing phase separation except for milled blends containing 2 wt % EVA, which had no separable narrow band and remained so. These results indicate that about 2 wt % EVA is compatible with the PVC phase and in equilibrium, while milled blends with more than 2 wt % EVA are metastable.     

The Influence of Crystal Habit on the Prediction of Dry Powder Inhalation Formulation Performance Using the Cohesive–Adhesive Force Balance Approach

The aim of this investigation was to study the influence of crystalline habit of active pharmaceutical ingredients on the cohesive–adhesive force balance within model dry powder inhaler (DPI) formulations and the corresponding affect on DPI formulation performance. The cohesive–adhesive balance (CAB) approach to colloid probe atomic force microscopy (AFM) was employed to determine the cohesive and adhesive interactions of micronized budesonide particles against the {102} and {002} faces of budesonide single crystals and crystalline substrates of different sugars (cyclodextrin, lactose, trehalose, raffinose, and xylitol), respectively. These data were used to measure the relative level of cohesion and adhesion via CAB and the possible influence on in vitro performance of a carrier-based DPI formulation. Varying the crystal habit of the drug had a significant effect on the cohesive measurement of micronized budesonide probes, with the cohesive values on the {102} faces being approximately twice that on the {002} crystal faces. However, although different CAB values were measured with the sugars with respect to the crystal faces chosen for the cohesive-based measurement, the overall influence on the rank order of the CAB values was not directly influenced. For these data sets, the CAB gradient indicated that a decrease in the dominance of the adhesive forces led to a concomitant increase in fine particle delivery, reaching a plateau as the cohesive forces became dominant. The study suggested that crystal habit of the primary drug crystals influences the cohesive interactions and the resulting force balance measurements of colloid probe CAB analysis.     

Some Characteristics of Free Cell Population in the Airways of Rats after Intratracheal Instillation of Copper-Containing Nano-Scale Particles

We used stable water suspensions of copper oxide particles with mean diameter 20 nm and of particles containing copper oxide and element copper with mean diameter 340 nm to assess the pulmonary phagocytosis response of rats to a single intratracheal instillation of these suspensions using optical, transmission electron, and semi-contact atomic force microscopy and biochemical indices measured in the bronchoalveolar lavage fluid. Although both nano and submicron ultrafine particles were adversely bioactive, the former were found to be more toxic for lungs as compared with the latter while evoking more pronounced defense recruitment of alveolar macrophages and especially of neutrophil leukocytes and more active phagocytosis. Based on our results and literature data, we consider both copper solubilization and direct contact with cellular organelles (mainly, mitochondria) of persistent particles internalized by phagocytes as probable mechanisms of their cytotoxicity.