Modification of nylon 66 by electron beam irradiation for improved properties and superior performances

Nylon 66 has been transformed into a material with significantly improved properties like hardness, tensile strength, and flexural modulus by processing it under the optimized dose rate of electron beam in the presence of suitable crosslinkers. Furthermore, percent water absorption of nylon 66 was reduced substantially on irradiation. Thermogravimetric analysis revealed that thermal stability of nylon 66 improved with increasing dose of radiation. Improvement of mechanical and thermal properties and reduction of water absorption of nylon 66 were due to the crosslinking of polyamide molecules made possible by the high energy radiation. Increase of crosslinking with increasing radiation dose was verified by the increase of gel content at higher doses. Differential scanning calorimetry showed that both melting and crystallization temperatures along with percent crystallinity of nylon 66 were decreased with the increasing dose of radiation leading to the development of more amorphous character in this semicrystalline polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

A study on dynamic rheological characterisation of electron beam crosslinked high vinyl styrene butadiene styrene block copolymer

Crosslinking of elastomers using electron beam radiation has several advantages over conventional method. It is accomplished much faster, in a more environmental friendly approach and in a much simpler manner. When fast moving electrons that are generated from electron accelerators are targeted on a polymer matrix, they primarily crosslink the polymer. However, in the process, some chain scission may also occur. In this work, a high vinyl (~50%) styrene–butadiene–styrene (S–B–S) block copolymer was used as the base polymer. Radiation doses were varied from 25 to 300 kGy. A detailed investigation was made to understand the effect of electron beam radiation on the rheological properties such as storage modulus, loss modulus, storage viscosity and complex viscosity of the block copolymer under strain and frequency sweeps performed in a Rubber Process Analyzer (RPA). Recyclability of the crosslinked S–B–S polymer was also explored by RPA and mechanical studies.     

Improved algorithms for resource allocation under varying capacity

We consider the problem of scheduling a set of jobs on a system that offers certain resource, wherein the amount of resource offered varies over time. For each job, the input specifies a set of possible scheduling instances, where each instance is given by starting time, ending time, profit and resource requirement. A feasible solution selects a subset of job instances such that at any timeslot, the total requirement by the chosen instances does not exceed the resource available at that timeslot, and at most one instance is chosen for each job. The above problem falls under the well-studied framework of unsplittable flow problem on line. The generalized notion of scheduling possibilities captures the standard setting concerned with release times and deadlines. We present improved algorithms based on the primal–dual paradigm, where the improvements are in terms of approximation ratio, running time and simplicity.     

KINETICS OF URANIUM EXTRACTION BY MACROPOROUS BIFUNCTIONAL PHOSPHINIC ACID RESIN

ABSTRACT

The rate of extraction of uranium by macroporous bifunctional phosphinic acid (MPBPA) resin from nitric acid medium has been studied under particle diffusion controlled conditions. The internal diffusion coefficient was found to increase with increase in temperature and decrease with increase in particle size. The activation energies and entropies suggest that the extraction of uranium essentially follows ion exchange mechanism at low concentration of nitric acid while it is through linkage of >P=0 group of the resin at high concentrations.     

Advances in Etching High-Density Embedded FRAM Structures

The development of ferroelectric random access memories (FRAM) has been a sustained endeavor among semiconductor manufacturers over the past decade in response to the growing communications and consumer electronics demand for nonvolatile memories capable of high-speed/low-voltage operation. Process technology and materials performance improvements have refined cell structure, device density, operating voltage, endurance, and data retention. Similarly, advances are being made in etch technology to enable the patterning of true high-density, electrically sound FRAM capacitor arrays. This paper addresses enhancements in chamber design and etch chemistry that have significantly improved electrical performance of the capacitors and achieved sustained stability of the etch process.     

Delay-bounded packet scheduling of bursty traffic over wireless channels

In this paper, we study minimal power transmission of bursty sources over wireless channels with constraints on mean queuing delay. The power minimizing schedulers adapt power and rate of transmission based on the queue and channel state. We show that packet scheduling based on queue state can be used to trade queuing delay with transmission power, even on additive white Gaussian noise (AWGN) channels. Our extensive simulations show that small increases in average delay can lead to substantial savings in transmission power, thereby providing another avenue for mobile devices to save on battery power. We propose a low-complexity scheduler that has near-optimal performance. We also construct a variable-rate quadrature amplitude modulation (QAM)-based transmission scheme to show the benefits of the proposed formulation in a practical communication system. Power optimal schedulers with absolute packet delay constraints are also studied and their performance is evaluated via simulations.     

Nasopharyngeal colonization in Costa Rican children during the first year of life

BACKGROUND: The establishment of the nasopharyngeal flora was followed in Costa Rican children from birth to 1 year of age. METHODS: Nasopharyngeal cultures were obtained at 1 (n = 413), 3 (n = 393), 6 (n = 376) and 12 months (n = 356) of age from children representative of the population in the Puriscal district. Weekly cultures were obtained from a subcohort of these children (n = 101). Mother-infant diads (n = 95) and preschool children (n = 208) attending day-care centers were also studied. RESULTS: The estimated proportion of colonized children in the population differed markedly depending on the frequency of culture. Quarterly cultures showed a slow increase in carrier rates from 3.9% for Haemophilus influenzae, 3.1% for Streptococcus pneumoniae and 6.5% for Moraxella catarrhalis at 1 month of age to 10.1% carrying H. influenzae and 19.4% carrying S. pneumoniae by the end of the first year. By quarterly culture the proportion of children colonized at least once was 36% for S. pneumoniae, 26% for H. influenzae and 28% for M. catarrhalis. In contrast weekly sampling showed that 95 to 100% of the children were colonized at least once during the first year of life with H. influenzae, S. pneumoniae or M. catarrhalis. Nasopharyngeal carriage of H. influenzae, S. pneumoniae and M. catarrhalis was low in the mothers, and very few mother-infant pairs carried identical bacteria at the same time. In contrast carrier rates were high in the siblings attending day care (H. influenzae 27.9%, S. pneumoniae 39.4%, both organisms 26.6%). Infants with siblings had significantly higher bacterial carriage at all ages than infants without siblings. CONCLUSIONS: Quarterly nasopharyngeal cultures showed that Costa Rican infants acquire their nasopharyngeal flora at a rate comparable with that for infants in developed countries and that siblings are an important source of the bacteria. Weekly samplings showed that virtually all children were colonized at least once during the first year of life.     

Polyamide-6,6/in situ silica hybrid nanocomposites by sol-gel technique: synthesis, characterization and properties

The organic-inorganic hybrid nanocomposites comprising of poly(iminohexamethyleneiminoadipoyl), better known as Polyamide-6,6 (abbreviated henceforth as PA66), and silica (SiO₂) were synthesized through sol-gel technique at ambient temperature. The inorganic phase was generated in situ by hydrolysis-condensation of tetraethoxysilane (TEOS) in different concentrations, under acid catalysis, in presence of the organic phase, PA66, dissolved in formic acid. Infrared (IR) spectroscopy was used to monitor the microstructural evolution of the silica phase in the PA66 matrix. Wide angle X-ray scattering (WAXS) studies showed that the crystallinity in PA66 phase decreased with increasing silica content. Atomic force microscopy (AFM) of the nanocomposite films revealed the dispersion of SiO₂ particle with dimensions of <100 nm in the form of network as well as linear structure. X-ray silicon mapping further confirmed the homogeneous dispersion of the silica phase in the bulk of the organic phase. The melting peak temperatures slightly decreased compared to neat PA66, while an improvement in thermal stability by about 20 °C was achieved with hybrid nanocomposite films, as indicated by thermogravimetric analysis (TGA). Dynamic mechanical analysis (DMA) exhibited significant improvement in storage modulus (E′) for the hybrid nanocomposites over the control specimen. An increase in Young's modulus and tensile strength of the hybrid films was also observed with an increase in silica content, indicating significant reinforcement of the matrix in the presence of nanoparticles. Some properties of the in situ prepared PA66-silica nanocomposites were compared with those of conventional composites prepared using precipitated silica as the filler by solution casting from formic acid.