Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Enzymatic degradation of thermoresponsive poly(N‐isopropylacrylamide) grafted to carboxymethylcellulose copolymers

The enzymatic degradation of poly(N‐isopropyl acrylamide) (PNIPAM) grafted to carboxymethylcellulose (CMC) copolymers with a cellulasic preparation (Trichoderma viride) was studied. The enzymatic activity of the cellulasic preparation against CMC and the grafted copolymers was determined by the Petterson–Porath method, while their reduced viscosity variation in the presence of the same preparation was also followed. It has been shown that the enzymatic degradation behavior depends on the copolymer composition and the reaction temperature. Reducing sugars analysis showed that the experimental values for the grafted copolymers were higher than the calculated ones. At 50°C, the enzymatic reaction is completed in about 20 min for the copolymers, whereas for CMC it takes more than 40 min. It can be concluded that their enzymatic degradation is facilitated by the presence of the PNIPAM grafts. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1383–1386, 2003     

Metallic Conductive Nanowires Elaborated by PVD Metal Deposition on Suspended DNA Bundles

Metallic conductive nanowires (NWs) with DNA bundle core are achieved, thanks to an original process relying on double‐stranded DNA alignment and physical vapor deposition (PVD) metallization steps involving a silicon substrate. First, bundles of DNA are suspended with a repeatable process between 2 µm high parallel electrodes with separating gaps ranging from 800 nm to 2 µm. The process consists in the drop deposition of a DNA lambda‐phage solution on the electrodes followed by a naturally evaporation step. The deposition process is controlled by the DNA concentration within the buffer solution, the drop volume, and the electrode hydrophobicity. The suspended bundles are finally metallized with various thicknesses of titanium and gold by a PVD e‐beam evaporation process. The achieved NWs have a width ranging from a few nanometers up to 100 nm. The electrical behavior of the achieved 60 and 80 nm width metallic NWs is shown to be Ohmic and their intrinsic resistance is estimated according to different geometrical models of the NW section area. For the 80 nm width NWs, a resistance of about few ohms is established, opening exploration fields for applications in microelectronics.     

Characterization of microdevices for ferrous chloride separation for biosensing applications

Ferrous chloride has a variety of applications such as a reducing flocculation agent in waste-water treatment, especially for wastes containing chromate, in the laboratory synthesis of iron complexes and it is employed as a reducing agent in many organic syntheses. The device used for experiment was fabricated on the silicon wafer as support for two electrodes in a SU8 polymer microchannel with an inlet, for the injection of aqueous solution of ferrous chloride, and two outlets, for the two by-products of separated solutions. The various parameters of the device were measured by White Light Interferometer (WLI) and Scanning Electron Microscopy (SEM). The magnetic field created by applying different types of potential between two electrodes determined ferrous chloride to separate in ferrous oxide and chlorine (in gaseous form). If a protein is added in this solution we have the possibility to immobilize the protein on the iron particles and on the channel area. The electrical results were collected using a semiconductor system analyzer Keithley and were examined subsequently. The Fe complexes deposited on the electrodes were characterized by XRD analyses.     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Synthesis,structural and morphological characteristics,magnetic and optical properties of Co doped ZnO nanoparticles

Zn_1−xCo_xO (x==0.05, 0.10, 0.15) nanoparticles have been synthesized by an alternative wet-chemical synthesis route using the SimAdd technique. The as-obtained powders were investigated by FT-IR spectroscopy, X-ray diffraction and thermal analysis correlated with evolved gas analysis (TG–DTA–FT-IR) in order to determine their chemical nature, crystalline structure and to establish the decomposition sequences. The precipitates are generally amorphous, but low-intensity reflection peaks assigned both to the zinc oxalate dihydrate, and zinc hydroxide can be observed in the recorded patterns, indicating that hydroxy-oxalate precipitates were obtained. The structure, morphology and magnetic properties of the thermally treated samples have been investigated by X-ray diffraction, FT-IR, HRTEM, SAED, UV–vis and EPR. XRD studies reveal a hexagonal wurtzite-type structure for all Zn_1−xCo_xO samples. TEM investigations show particle size between 28 and 37 nm, with spherical and polyhedral shapes and with tendency to form aggregates. The presence of a Co₃O₄ secondary phase was evidenced by XRD, UV–vis and EPR for the Zn_0.85Co_0.15O sample. The ferromagnetic behavior of the samples was revealed. The paper highlights that by varying the cobalt concentration it is possible to modulate the structural, morphological, optical and magnetic properties.     

An empirical evaluation of P system testing techniques

This paper presents the existing techniques for P system testing and performs an empirical evaluation of their fault-detection efficiency. The comparison is performed using mutation testing and, based on the results obtained, some improved testing methodologies are proposed.     

Bioactive polymers LVII. A novel drug delivery system based on 5-nitro-2-furaldehyde-semicarbazone and poly(acrylic acid-co-vinyl alcohol)

The coupling of 5-nitro-2-furaldehyde-semicarbazone on to poly(acrylic acid-co-vinyl alcohol) copolymer by the use of dicyclohexylcarbodiimide as activator has been studied. On the basis of an experimental design, the influence of different parameters is studied (activator/support, drug/support, reaction time, solvent volume) in order to determine the optimum conditions for obtaining the maximum amount of the coupled drug on the support.