Studies on spinel cobaltites,MCo2O4 (M = Mn,Zn, Fe,Ni and Co) and their functional properties

Optimization of electrodes for charge storage with appropriate processing conditions places significant challenges in the developments for high performance charge storage devices. In this article, metal cobaltite spinels of formula MCo₂O₄ (where M = Mn, Zn, Fe, Ni and Co) are synthesized by oxalate decomposition method followed by calcination at three typical temperatures, viz. 350, 550, and 750 °C and examined their performance variation when used as anodes in lithium ion batteries. Phase and structure of the materials are studied by powder x-ray diffraction (XRD) technique. Single phase MnCo2O4,ZnCo2O4 and Co3O4 are obtained for all different temperatures 350 °C, 550 °C and 750 °C; whereas FeCo₂O₄ and NiCo₂O₄ contained their constituent binary phases even after repeated calcination. Morphologies of the materials are studied via scanning electron microscopy (SEM): needle-shaped particles of MnCo₂O₄ and ZnCo₂O₄, submicron sized particles of FeCo₂O₄ and agglomerated submicron particle of NiCo₂O₄ are observed. Galvanostatic cycling has been conducted in the voltage range 0.005–3.0 V vs. Li at a current density of 60 mA g^?1 up to 50 cycles to study their Li storage capabilities. Highest observed charge capacities are: MnCo₂O₄ – 365 mA h g^?1 (750 °C); ZnCo₂O₄ – 516 mA h g^?1 (550 °C); FeCo₂O₄ – 480 mA h g^?1 (550 °C); NiCo₂O₄ – 384 mA h g^?1 (750 °C); and Co₃O₄ – 675 mA h g^?1 (350 °C). The Co₃O₄ showed the highest reversible capacity of 675 mA h g^?1; the NiO present in NiCo₂O₄ acts as a buffer layer that results in improved cycling stability; the ZnCo₂O₄ with long needle-like shows good cycling stability.     

Towards finding the best-fit distribution for OSN data

The Journal of Supercomputing - Currently, all online social networks (OSNs) are considered to follow a power-law distribution. In this paper, the degree distribution for multiple OSNs has been...     

Reversible,repeatable and low phase transition behaviour of spin coated nanostructured vanadium oxide thin films with superior mechanical properties

Smooth, uniform and crystalline vanadium oxide thin films were deposited on quartz by spin coating technique with four different rpm i.e., 1000, 2000, 3000 and 4000 and subsequently post annealed at 350, 450 and 550?°C in vacuum. Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) techniques were utilized for microstructural characterizations and phase analysis, respectively, for vanadium oxide powder and deposited film. Nanorods were observed to be grown after vacuum annealing. X-ray photoelectron spectroscopy (XPS) technique was utilized to study the elemental oxidation state of deposited vanadium oxide films. Thermo-optical and electrical properties such as solar transmittance (τ_s), reflectance (ρ_s), absorptance (α_s), infrared (IR) emittance (ε_ir) and sheet resistance (R_s) of different thin films were evaluated. Based on the optical characteristics the optimized condition of the film processing was identified to be spin coated at 3000?rpm. Subsequently, the nanoindentation technique was utilized to measure hardness and Young's modulus of the optimized film. The measured nanomechanical properties were found to be superior to those reported for sputtered vanadium oxide films. Finally, temperature dependent phase transition characteristics of optimized vanadium oxide films were studied by differential scanning calorimetry (DSC) technique. Reversible and repeatable phase transition was found to occur in the range of 44–48?°C which was significantly lower than the phase transition temperature (i.e., 68?°C) of bulk VO₂.     

Influence of Microstructure on the Mechanical Properties of a Pearlitic Steel

Metallurgical and Materials Transactions A - The effect of austenite grain size on microstructure and mechanical properties was studied for a pearlitic steel. The best combination of ultimate...     

Offshore manufacturing contract design based on transfer price considering green tax: a bilevel programming approach

The problem of designing offshore manufacturing contract resulting in optimal transfer price is troubling multinational companies over the past few years. This paper proposes designing offshore manufacturing contracts based on the transfer price in the form of bilevel programming problems after considering green tax. In these contract designs, a firm in a developed country sells a single product in its market. The same product is simultaneously being manufactured by another firm in a developing country with lower manufacturing cost. After anticipating the consumer demand, the seller places an order, based on which the manufacturer manufactures the ordered quantity, and offers a transfer price which in turn maximises its net profit after paying green tax to its government. While setting the transfer price, the manufacturer considers the manufacturing cost, the export duty payable to its government and the cost of shipping the product to the developed country. After buying the product from the manufacturer at the transfer price, the seller then sets the retail price which maximises its net profit after paying the import duty to its government; the retail price, however, must not be more than the maximum retail price applicable to the market. Thus, offshore manufacturing contract results in optimal after-tax profits for both the firms. An experimental study has been carried out to discuss the practical aspects of the results developed, where a US firm is offshoring its manufacturing activity to a Chinese firm in order to draw maximum profit.     

Assessing the sustainability of a manufacturing process using life cycle assessment technique—a case of an Indian pharmaceutical company

Clean Technologies and Environmental Policy - Manufacturing organizations are under continuous pressure to implement sustainability in their activities. There is a need to identify the...     

Metal contamination at a wood preservation site: characterisation and experimental studies on remediation

The aim of this investigation was to determine the occurrence of As, Cu, Cr and Zn in the soil at an abandoned wood preservation unit and to examine some possible extractants for the contaminants in the soil. The mean As content of the contaminated surface soils (0-10 cm) was 186 mg kg(-1), where as the mean concentrations of Cu, Cr and Zn in soils from the contaminated area were 26, 29 and 91 mg kg(-1), respectively. The elevated As content in the mineral soils is related to adsorption of inorganic As phases in the fine grained fractions, which are characterised by large surface area and high positive surface charge under the current acidic conditions. Cu and Cr were found to be rather mobile, which is reflected in their lower abundance in soils and significant accumulation in sediments in the drainage leaving the area. The fine fraction of the soil (<0.125 mm) has an average metal content increased by nearly 34% as compared to the <2-mm fraction conventionally used for the analysis and assessment of soil contamination. The <2-mm fraction constitutes approximately 65% of the total weight while the fine fraction (<0.125 mm) constitutes approximately 10%. These facts, taken together, are essential for the choice of remediation measures. Oxalate solutions have been tested as extractants for soil remediation. Dark acid oxalate extraction dissolves the amorphous Al- and Fe-oxides and hydroxides and mobilises the adsorbed inorganic As species. Oxalate also acts as a ligand for the cationic heavy metals, releasing them from exchangeable sites. With a three-step sequential leaching, up to 98-99% of the metals could be removed. At lower concentrations and higher pH, the leaching decreased to approximately 70%.     

Gelatin‐carbohydrate phase‐separated hydrogels as bioactive carriers in vaginal delivery: Preparation and physical characterizations

The current study focuses on the alteration of properties of the gelatin hydrogels using polysaccharides (e.g., maltodextrin, dextran, and sodium carboxymethyl cellulose) for probable use in vaginal delivery of antimicrobials. The hydrogels were prepared by varying the proportions of gelatin and polysaccharides and were characterized by microscopy, mechanical testing, and impedance spectroscopy. Metronidazole (MZ), drug of choice for the treatment of bacterial vaginosis, was incorporated within the hydrogels. In vitro release studies of MZ from the hydrogels was studied in‐depth using modified Franz's diffusion cell. Antimicrobial efficiency of the MZ‐loaded hydrogels was tested against E. coli and B. subtilis. The results suggested that the incorporation of polysaccharides resulted in the phase‐separated hydrogels. The properties of the hydrogels was found be suitable for vaginal delivery. The drug release and antimicrobial efficiency from the hydrogels suggested that the developed hydrogels may be used for the delivery of antimicrobials in the vaginal lumen. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40445.