Comparison between lipid and protein oxidation progress in the tail and claw muscles of signal crayfish (Pacifastacus leniusculus)

Microbial activity and then oxidation progress are the most important freshness indicators during post-mortem. In this study, we monitored proteomic and microbial changes, as well as biochemical degradation, in the tail and claw muscles of crayfish stored for 12 days at +4 °C. One specified protein band at 107 kDa in the claw muscle and two specified protein bands in the tail muscle at 140 and 36–40 kDa were identified. Western blotting indicated a higher amount of oxidised proteins in the tail compared to the claw muscle. Tail muscle showed higher oxidation progress and calpain activity than claw one. Both muscles were spoiled after 12 days with respect to total viable counts. In the first days, calpain activity is the main reason for protein degradation, while protein oxidation dominates for the rest of the time. Lipid–protein oxidation progress showed probably, protein oxidation started earlier than lipid oxidation in both muscles.     

Wear Behavior of Biodegradable Mg–5Zn–1Y–(0–1)Ca Magnesium Alloy in Simulated Body Fluid

Metals and Materials International - In this study, wear behavior of biodegradable Mg–5Zn–1Y–(0–1)Ca alloys is investigated in simulated body fluid. Wear test is performed...     

Vibration control of laminated truncated conical shell via magnetostrictive layers

Abstract

In this study feedback control is applied to control the free vibration response of an isotropic truncated conical shell embedded with magnetostrictive layers. Classical shell theory is applied to derive the shell vibration equations. The results are derived based on the Galerkin method and the results are compared with published results and the results of finite element software in order to determine the accuracy of using method. The influence of several parameters such as the thickness of magnetostrictive layers, control gain, length and radius of the large edge of the shell on the vibration suppression of fundamental frequency is determined.     

Experimental investigation on the effect of surface characterization of electrodes on the gas bubble dynamics in electrolyte flow and performance of FLA batteries by using PIV

In the flooded lead_acid batteries (FLAB), gas bubbles are initially formed on the surface of the electrodes, which are produced by electrochemical reactions, and then released into the electrolyte. In the present investigation, the effect of surface characterization of electrodes of FLAB on the gas bubble dynamic parameters in the electrolyte flow at different charging/discharging rates (C-rates) are studied utilizing particle image velocimetry (PIV) method. The results show that the capacity of FLAB have a linear behav-ior due to changes in each of the two parameters of the surface characterization of electrodes and the C-rate. At all State of charges (SOCs) of FLAB cells in different tests, increasing average roughness (Ra) and average wavelength of the roughness (ka) in the electrode surfaces, results in an increase in average bub-ble diameter and bubble rising velocity. Nevertheless, a sharp decrease in the void fraction of bubbles within the electrolyte was observed due to the increment in ka and Ra. Also, the effect of the rising move-ment of gas bubbles within the electrolyte on the average electrolyte velocity pattern in the gap between the electrodes by changing the surface characterization of electrodes are investigated in detail.     

Stability enhancement of polypyrrole thin film ammonia sensor by camphor sulfonic acid dopant

Journal of Materials Science: Materials in Electronics - The main weakness of polymer gas sensors is its stability. Here, we report stability enhancement of a 100 nm polypyrrole (PPy) thin...     

Synthesis of biocompatible and degradable microspheres based on 2‐hydroxyethyl methacrylate via microfluidic method

Monodisperse poly(2‐hydroxyethyl methacrylate), p‐HEMA, microspheres in size ranging from 16 to 340 (μm) were synthesized by in situ emulsion photopolymerization of HEMA monomer with polyethylene glycol diacrylate (p‐EGDA) by means of a three‐dimensional microfluidic flow‐focusing device. An aqueous solution of HEMA, p‐EGDA as chain extender and UV‐photoinitiator serving as dispersed phase formed microdroplets in a continuous oil phase mainly consisting of n‐heptane. A downward coaxial orifices design in the device led to confinement of the reaction admixtures thread to central axis of the microchannels. This design strategy could solve the wetting problem of dispersed phase with the microchannels leading to a successful production of monodisperse microspheres with size variation of less than 4%. The effects of concentration of p‐EGDA, surfactant, and flow rate ratios on microsphere size were examined. It was observed that increasing the concentration of p‐EGDA slightly increases the size whereas increasing the flow rate ratios of continuous to dispersed phase effectively decreases the size of microspheres. The rapid continuous synthesis of p‐HEMA based microspheres via the microfluidic route with reliable control over size, size distribution, and composition opens new doors for mass production of biocompatible and degradable polymeric microspheres for enormous biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40925.     

Mechanical, rheological, and thermal behavior assessments in HDPE/PA-6/EVOH ternary blends with variable morphology

Visco-elastic and dielectric spectra of multiwalled carbon-nanotube reinforced silicon elastomer nanocomposites were used to study relaxation behavior. SEM photomicrographs shows well dispersion of MWCNT in elastomer matrix. In visco-elastic analysis primary relaxation was studied as a function of temperature (?100 to 100 °C) at frequency 1Hz and strain 1 %. The effect of MWCNT loadings on storage modulus, loss modulus, and loss tangent has been studied. The non-linearity in loss tangent, storage modulus and loss modulus was explained on the basis of MWCNT-elastomer interaction and the inter-aggregate attraction of MWCNT. The secondary β relaxation was studied using dielectric relaxation spectra in the frequency range of 0.1 Hz to 10⁶ Hz. The effect of MWCNT loadings on the complex and real parts of impedance was distinctly visible which has been explained on the basis of interfacial polarization of fillers in a heterogeneous medium and relaxation dynamics of polymer chains in the vicinity of fillers. The dielectric formalism has been utilized to further investigate the conductivity and relaxation phenomenon. The ‘percolation limit’ of the MWCNT in the silicon elastomer was found to be in the range of 4 phr loading.     

Equivalent linear model for fully self‐centering earthquake‐resisting systems

Modern rocking and stepping cores have been known as the efficient self‐centering earthquake‐resisting systems (SC‐ERSs). The current article proposes an approximate equivalent linear (EL) model for rapid estimation of the SC‐ERS displacement. An equivalent damping ratio and effective stiffness are formulated for flag‐shaped hysteresis of a fully SC‐ERS. The approximate EL model is first established using secant stiffness and Jacobsen's damping model. Nonlinear response history analyses are carried out to compare exact and approximated peak displacements. Findings reveal that EL analysis of the SC‐ERS based on Jacobsen's damping leads to underestimation of the maximum inelastic displacement. Accordingly, a new optimal damping formula is proposed using a genetic algorithm and nonlinear regression analyses. The improved EL model is validated by practical examples, and the results show acceptable accuracy in design‐level displacement estimation.