The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Water leakage due to the welding defect and improvement to reach 1-MW beam operation in the mercury target of J-PARC

ABSTRACT

Neutron flux per pulse reached world record at neutron source in Japan Proton Accelerator Research Complex (J-PARC). In the J-PARC, mercury target system is used as a spallation neutron source. A target vessel has a multi-walled protection system that comprises a mercury vessel enclosed with a double-walled water shroud. This is to prevent the leakage of the mercury outside the target vessel. The multi-walled structure needed to be complicated with a lot of welding lines. However, during the operation, we faced an unscheduled shutdown due to water leakage to the intermediate layer between the mercury vessel and water shroud. An investigation on the cause of the leakage was carried out. It is deduced that the leakage path was formed due to the crack propagation from welding defects that are caused by the complicated multi-walled structure. The crack propagation is attributed to the repeated stress by pressure waves generated in the mercury target. Based on the investigation results, the design was improved to remove the welding line on the complicated structure and to realize the stable operation with 1 MW proton beam, which is the final design value of the neutron source in J-PARC.     

Indoor air pollution and its impact on children under five years old in Bangladesh

Indoor air concentrations of volatile organic compounds (VOCs), carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), and dust particles were measured for 49 biomass and 46 fossil fuel users in urban slums of Dhaka, Bangladesh. The health impacts of these pollutants were assessed on 65 and 51 children under five years old from families who use biomass and fossil fuel as main source of energy, respectively. Mean concentrations of CO were found to be significantly higher in biomass fuel users (P = 0.010), while geometric mean concentrations of benzene, xylene, toluene, hexane, total VOCs, and NO2 were significantly higher (P < 0.01) in the fossil fuel users. Symptoms such as redness of eyes, itching of skin, nasal discharge, cough, shortness of breath, chest tightness, wheezing, or whistling chest were found to be associated with the choice of biomass fuel, with the odds ratio ranging from 4.0 to 6.3. No significant association of use of biomass fuel with respiratory diseases, eczema, diarrhea, or viral fever was observed after adjustment for potential confounders. These results suggest a significant association between the biomass fuel-using population and respiratory symptoms. These symptoms may not be due to the pollutants only, as some other underlying causes may be present. PRACTICAL IMPLICATIONS: The health of children under five years old in Bangladesh, especially those living in poor socioeconomic conditions, is considered to be worsening because of indoor air pollution. It is commonly suggested that biomass fuel should be replaced by fossil fuel, as pollution levels are believed to be higher with biomass fuel. Our findings, however, suggest that pollution can be higher with fossil fuels, and indicate that a switch in fuel from biomass to fossil does not necessarily improve the children's health. Awareness programs should therefore be undertaken to avoid the unnecessary use of gas. Clean fuels and clean stoves should also be ensured to reduce emissions of indoor air pollutants.     

Occurrence and formation potential of N-nitrosodimethylamine in ground water and river water in Tokyo

N-nitrosodimethylamine (NDMA), a disinfection byproduct of water and wastewater treatment processes, is a potent carcinogen. We investigated its occurrence and the potential for its formation by chlorination (NDMA-FP_2Cl) and by chloramination (NDMA-FP_2NHCl) in ground water and river water in Tokyo. To characterize NDMA precursors, we revealed their molecular weight distributions in ground water and river water. We collected 23 ground water and 18 river water samples and analyzed NDMA by liquid chromatography-tandem mass spectrometry. NDMA-FP_2Cl was evaluated by chlorinating water samples with free chlorine for 24 h at pH 7.0 while residual free chlorine was kept at 1.0-2.0 mgCl₂/L. NDMA-FP_2NHCl was evaluated by dosing water samples with monochloramine at 140 mgCl₂/L for 10 days at pH 6.8. NDMA precursors and dissolved organic carbon (DOC) were fractionated by filtration through 30-, 3-, and 0.5 kDa membranes. NDMA concentrations were <0.5-5.2 ng/L (median: 0.9 ng/L) in ground water and <0.5-3.4 ng/L (2.2 ng/L) in river water. NDMA concentrations in ground water were slightly lower than or comparable to those in river water. Concentrations of NDMA-FP_2Cl were not much higher than concentrations of NDMA except in samples containing high concentrations of NH₃ and NDMA precursors. The increased NDMA was possibly caused by reactions between NDMA precursors and monochloramine unintentionally formed by the reaction between free chlorine and NH₃ in the samples. NDMA precursors ranged from 4 to 84 ng-NDMA eq./L in ground water and from 11 to 185 ng-NDMA eq./L in river water. Those in ground water were significantly lower than those in river water, suggesting that NDMA precursors were biodegraded, adsorbed, or volatilized during infiltration. The molecular weight of NDMA precursors in river water was dominant in the <0.5 kDa fraction, followed by 0.5-3 kDa. However, their distribution was inconsistent in ground water: one was dominant in the <0.5 kDa fraction, and the other in 0.5-3 kDa. Molecular weight distributions of NDMA precursors were very different from those of DOC. This is the first study to reveal the widespread occurrence and characterization of NDMA precursors in ground water.     

Effects of low- or medium-pressure ultraviolet lamp irradiation on Microcystis aeruginosa and Anabaena variabilis

A pure culture of Microcystis aeruginosa or Anabaena variabilis, the representatives of water blooming algae, was exposed to low-pressure (LP) or medium-pressure (MP) UV lamps. Irradiated pure culture suspension was subsequently incubated for 7d under white light fluorescent lamps. During incubation, profiles of the number of cells, DNA damage and photosynthetic activity were determined. When UV fluence was 600mJ/cm(2), M. aeruginosa cell numbers decreased throughout the 7-d incubation period, to produce 1.5log reduction (LP) or 1.2log reduction (MP) compared with control. The amount of DNA damage was 2.02x10(-4) ESS/base (LP) and 3.42x10(-4) ESS/base (MP) just after UV irradiation, which became 0.05x10(-4) ESS/base and 0.23x10(-4) ESS/base, respectively, after 3d incubation. However, cell number kept decreasing, even after DNA repair. Photosynthetic activity decreased by 1.5log within 1d (LP) or 3d (MP). Thus, reduction in photosynthetic activity could contribute to the reduction in M. aeruginosa cell numbers. A. variabilis cell numbers reduced by 2.3log (LP) or 2.2log (MP) during the 7-d incubation period; however, after DNA damage repair, cell number began to increase. The amount of DNA damage was 6.07x10(-4) ESS/base (LP) and 4.48x10(-4) ESS/base (MP) just after UV irradiation, which became 0.23x10(-4) ESS/base and 0.40x10(-4) ESS/base, respectively, after 3d incubation. No reduction was observed in photosynthetic activity/cell. Therefore, DNA damage is the main contributor of the reduction in cell number of A. variabilis.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by adding modified silicones

The impact strength of cellulose diacetate (CDA) bonded with a modified cardanol (3‐pentadecylphenoxy acetic acid: PAA) was greatly improved up to 9 kJ/m² by adding a relatively small amount of modified silicones while suppressing a decrease in bending strength. In our recent research, this thermoplastic resin (PAA‐bonded CDA) exhibited high rigidity, glass transition temperature, and water resistance. However, its impact strength was insufficient for use in durable products. Therefore, silicones modified with polyether, amino, and epoxy groups were investigated as possible ways to improve the impact strength. The results show that adding polyether‐modified silicone (polyether silicone) with moderate polarity relative to PAA‐bonded CDA resulted in shearing deformation greatly enhances its impact strength while maintaining other properties, including glass transition temperature (T_g), water resistance, and thermoplasticity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40366.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by using olefin resins

Impact strength of a modified cardanol‐bonded cellulose thermoplastic resin was greatly improved by using a small amount of olefin resins. As we showed, this thermoplastic resin (3‐pentadecylphenoxy acetic acid (PAA)‐bonded cellulose diacetate (CDA): PAA‐bonded CDA) exhibited high practical properties such as bending strength, heat resistance, and water resistance. However, its impact strength was insufficient for use in durable products. We improved the impact strength of PAA‐bonded CDA by adding hydrophobic olefin resins, such as polyethylene or polypropylene, while maintaining good bending strength and breaking strain. Furthermore, the application of olefin resins also increased water resistance and fluidity. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39829.