A Polyallylamine Anchored Amine‐Rich Laser‐Ablated Graphene Platform for Facile and Highly Selective Electrochemical IgG Biomarker Detection

Current immunosensors have an insufficient number of binding sites for the recognition of biomolecules, which leads to false positive or negative results. In this research, a facile, cost‐effective, disposable, and highly selective electrochemical immunosensing platform is developed based on cationic polyelectrolyte polyallylamine (PAAMI) anchored laser‐ablated graphene (LAG). Here, for the first time, PAAMI is introduced to stabilize LAG flakes, while retaining the intrinsic thermal and electronic properties of the substrate by noncovalent π–π interaction and electrostatic physical absorption. The sensing platform offers a suitable number of anchoring sites for the immobilized antibodies by providing ? NH₂ functional groups. The proper grafting of PAAMI is confirmed through X‐ray photoelectron spectroscopy and Raman spectroscopy. The immunosensing platform is applied to detect immunoglobulin (IgG) biomarkers as a proof of concept. Under optimized conditions, the sensing platform exhibits a linear range of 0.012–15 and 15–352 ng mL^?1 with a limit of detection of 6 pg mL^?1 for IgG detection with high selectivity. Based on the analysis, the developed immunosensing platform can be used for point‐of‐care detection of IgG in clinical diagnostic centers. Furthermore, the developed strategy is well suited for the detection of other cancer biomarkers after immobilizing the relevant antibodies.     

Morphology-dependent spin Seebeck effect in yttrium iron garnet thin films prepared by metal-organic decomposition

In this study, we examined the dependence of surface morphology and spin Seebeck effect (SSE) voltages on the poly[vinylpyrrolidone] (PVP) concentration in polycrystalline Y₃Fe₅O₁₂ (YIG) ultrathin films on a silicon substrate synthesized by metal-organic decomposition followed by a crystallization process. During fabrication, PVP concentrations of 0.5–2 g were used while all other conditions remained fixed. Atomic force microscopy and grazing incidence X-ray diffraction (XRD) measurements revealed a strong dependence of crystallinity and sample morphology on PVP concentration. The 1-g PVP sample had the smoothest surface, with a root mean square roughness of 0.2 nm, as well as superior bulk uniformity with respect to the shape and intensity of XRD reflection peaks. This was confirmed by scanning electron microscopy measurements of a cross-section of the sample that revealed a uniform film without pores. SSE measurements were performed to obtain the output SSE voltages (V_SSE) of all samples, to which a platinum layer was added as a spin-detection layer. Repeatedly, the 1-g PVP sample had the best performance, demonstrating the importance of film crystallinity and morphology in the spin-to-charge conversion efficiency of YIG films.     

Antimicrobial Action of Water-Soluble β-Chitosan against Clinical Multi-Drug Resistant Bacteria

Recently, the number of patients infected by drug-resistant pathogenic microbes has increased remarkably worldwide, and a number of studies have reported new antibiotics from natural sources. Among them, chitosan, with a high molecular weight and α-conformation, exhibits potent antimicrobial activity, but useful applications as an antibiotic are limited by its cytotoxicity and insolubility at physiological pH. In the present study, the antibacterial activity of low molecular weight water-soluble (LMWS) α-chitosan (α1k, α5k, and α10k with molecular masses of 1, 5, and 10 kDa, respectively) and β-chitosan (β1k, β5k, and β10k) was compared using a range of pathogenic bacteria containing drug-resistant bacteria isolated from patients at different pH. Interestingly, β5k and β10k exhibited potent antibacterial activity, even at pH 7.4, whereas only α10k was effective at pH 7.4. The active target of β-chitosan is the bacterial membrane, where the leakage of calcein is induced in artificial PE/PG vesicles, bacterial mimetic membrane. Moreover, scanning electron microscopy showed that they caused significant morphological changes on the bacterial surfaces. An in vivo study utilizing a bacteria-infected mouse model found that LMWS β-chitosan could be used as a candidate in anti-infective or wound healing therapeutic applications.     

Workforce planning and deployment for a hospital reservation call center with abandonment cost and multiple tasks

We consider a hospital reservation call center where operators handle multiple tasks. We take into account operator labor costs, caller waiting costs, and abandonment costs for lost calls. Instead of relying on the traditional method of queueing theory for call center management, we present a method that obtains expected caller waiting time and expected abandonment rate directly by introducing the inbound-load parameter. We develop a framework that combines workforce planning and operator deployment for a mixed call center in a single mathematical programming model. This paper also demonstrates how the proposed methodology can be applied in practice, with a case study based on actual operational data. Our primary conclusion is that the method presented in this research can significantly reduce both expected total cost (by 55.1% in our case study) and abandonment rate (from 15% to 2.1% in our case study). In addition, we demonstrate, using a sensitivity analysis, that our methodology will be more effective in an environment where the unit penalty cost of an abandoned call is relatively high among competitive hospitals.     

Preparation and properties of acrylonitrile–butadiene rubber–graphene nanocomposites

The graphene oxide (GO) was prepared by sonication‐induced exfoliation from graphite oxide, which was produced by oxidation from graphite flakes with a modified Hummer's method. The GO was then treated by hydrazine to obtain reduced graphene oxide (rGO). On the basis of the characterization results, the GO was successfully reduced to rGO. Acrylonitrile–butadiene rubber (NBR)–GO and NBR–rGO composites were prepared via a solution‐mixing method, and their various physical properties were investigated. The NBR–rGO nanocomposite demonstrated a higher curing efficiency and a change in torque compared to the gum and NBR–GO compounds. This agreed well with the crosslinking density measured by swelling. The results manifested in the high hardness (Shore A) and high tensile modulus of the NBR–rGO compounds. For instance, the tensile modulus at a 0.1‐phr rGO loading greatly increased above 83, 114, and 116% at strain levels of 50, 100, and 200%, respectively, compared to the 0.1‐phr GO loaded sample. The observed enhancement was highly attributed to a homogeneous dispersion of rGO within the NBR matrix; this was confirmed by scanning electron microscopy and transmission electron microscopy analysis. However, in view of the high ultimate tensile strength, the NBR–GO compounds exhibited an advantage; this was presumably due to strong hydrogen bonding or polar–polar interactions between the NBR and GO sheets. This interfacial interaction between GO and NBR was supported by the marginal increase in the glass‐transition temperatures of the NBR compounds containing fillers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42457.     

Polymer electrolyte membranes composed of an electrospun poly(vinylidene fluoride) fibrous mat in a poly(4‐vinylpyridine) matrix

Newly proposed polymer electrolyte membranes (PEMs) composed of an electrospun poly(vinylidene fluoride) (PVDF) fibrous mat embedded in a poly(4‐vinylpyridine) (P4VP) matrix were successfully fabricated in order to improve the mechanical and dimensional stabilities and ionic conductivity of membranes in lithium rechargeable batteries. Fourier transform infrared spectroscopic analysis showed that as a result of the use of a high voltage during electrospinning the crystalline structure of PVDF changed partially from α‐phase to β‐phase. Energy‐dispersive X‐ray spectroscopy confirmed the existence of crosslinked P4VP in the PVDF fibrous mat. The electrolyte uptakes of PVDF and PVDF/P4VP composite mats were higher than that of PVDF cast film. The tensile properties of PVDF/P4VP composite mat were considerably improved compared to those of the pristine PVDF fibrous mat under both dry and wet (soaked with electrolyte) conditions. In addition, the mechanical and dimensional stabilities of the PVDF/P4VP composite PEM were further enhanced due to crosslinking between the P4VP chains. Furthermore, the PVDF/P4VP composite PEM exhibited an ionic conductivity that was an order of magnitude higher than that of traditional PVDF film. © 2012 Society of Chemical Industry     

Inverted-load network for high-power Doherty amplifier

In this article, a high-power, high-efficiency inverted Doherty power amplifier (PA), having a more compact load network than that of the conventional Doherty amplifier, was designed and implemented for wide-band code-division multiple access (WCDMA) base-station applications. Its configuration and working principle are compared with the conventional Doherty amplifier. For experimental verification, we implemented an inverted Doherty amplifier, using a 190 W peak-envelope-power (PEP) laterally diffused metal-oxide-semiconductor (LDMOS) field-effect transistors (FETs). Using a four-carrier down-link WCDMA signal, we achieved a high power-added efficiency (PAE) of 32% and an average output power level as high as 46.3 dBm at a given adjacent channel leakage ratio (ACLR) level of -30 dBc. This is a 9.5% improvement in efficiency and 1 dB improvement in output power under the same ACLR conditions from those of the balanced class-AB operation using the same devices.     

Degradable poly(ester amine) based on poly(ethylene glycol) dimethacrylate and polyethylenimine as a gene carrier

Degradable poly(ester amine) (PEA) based on poly(ethylene glycol) dimethacrylate (PMEG) and polyethylenimine (PEI) were synthesized by Michael addition reaction. The ratios of PEI to PMEG in PEAs were 0.99, 1.02, and 1.07 with corresponding number‐average molecular weight of 1.3 × 10⁴, 1.2 × 10⁴, and 0.9 × 10⁴, respectively. Degradation rate of PEA at pH 7.4 was higher than that at pH 5.6. Good plasmid condensation and protection ability was shown when N/P molar ratio of PEA to DNA was above 15 (N: nitrogen element in PEA, P: phosphate in DNA). PEA/DNA complexes had positive zeta potential, narrow size distribution, good dispersity, and spheric shape with size below 250 nm when N/P ratio was above 30, suggestion of their endocytosis potential. Compared with PEI 25 KDa, the PEAs showed essential nontoxic to HeLa, HepG2 and 293T cells. With an increase in the molecular weight of PMEG, the transfection efficiency of PEAs in HeLa, HepG2 and 293T showed a tendency to decrease as well as the percent decrease of gene transfection efficiency with serum. The mechanism of PEA‐mediated gene transfection was attributed to “proton sponge effect” of PEI in the PEA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and electrochromic properties of spin self-assembled polyelectrolyte multilayer films composed of PEDOT:PSS and PAH

Polyelectrolyte multilayer films composed of a polycation (poly(allylamine hydrochloride) PAH) and a polyanion (poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) PEDOT:PSS) were prepared by a spin self-assembly method, and their electrochemical and electrochromic properties were investigated. The change in the surface charge and the optical absorption spectra of the multilayer films revealed that sequential deposition of polyelectrolyte was successfully achieved during the spin self-assembly. The electrochromic properties of 20-bilayered PAH/PEDOT:PSS were also investigated. The response time for the coloring and bleaching processes was 6.2 and 2.5 s, respectively, and the coloration efficiency was 199.3 cm²/C. These results indicate that a spin self-assembly process could be a viable alternative for the fabrication of electrochromic devices.