Physical Stability of Octenyl Succinate–Modified Polysaccharides and Whey Proteins for Potential Use as Bioactive Carriers in Food Systems

The high cost and potential toxicity of biodegradable polymers like poly(lactic‐co‐glycolic)acid (PLGA) has increased the interest in natural and modified biopolymers as bioactive carriers. This study characterized the physical stability (water sorption and state transition behavior) of selected starch and proteins: octenyl succinate–modified depolymerized waxy corn starch (DWxCn), waxy rice starch (DWxRc), phytoglycogen, whey protein concentrate (80%, WPC), whey protein isolate (WPI), and α‐lactalbumin (α‐L) to determine their potential as carriers of bioactive compounds under different environmental conditions. After enzyme modification and particle size characterization, glass transition temperature and moisture isotherms were used to characterize the systems. DWxCn and DWxRc had increased water sorption compared to native starch. The level of octenyl succinate anhydrate (OSA) modification (3% and 7%) did not reduce the water sorption of the DWxCn and phytoglycogen samples. The Guggenheim–Andersen–de Boer model indicated that native waxy corn had significantly (P < 0.05) higher water monolayer capacity followed by 3%‐OSA‐modified DWxCn, WPI, 3%‐OSA‐modified DWxRc, α‐L, and native phytoglycogen. WPC had significantly lower water monolayer capacity. All Tg values matched with the solid‐like appearance of the biopolymers. Native polysaccharides and whey proteins had higher glass transition temperature (Tg) values. On the other hand, depolymerized waxy starches at 7%‐OSA modification had a “melted” appearance when exposed to environments with high relative humidity (above 70%) after 10 days at 23 °C. The use of depolymerized and OSA‐modified polysaccharides blended with proteins created more stable blends of biopolymers. Hence, this biopolymer would be suitable for materials exposed to high humidity environments in food applications.     

Asking questions on handwritten document collections

International Journal on Document Analysis and Recognition (IJDAR) - This work addresses the problem of Question Answering (QA) on handwritten document collections. Unlike typical QA and Visual...     

Assessment of copper bioavailability and toxicity in vineyard runoff waters by DPASV and algal bioassay

The aim of this study was to assess the toxicity of runoff waters in an agricultural multipollution context through an in-depth assessment of copper bioavailability and toxicity. Runoff waters were screened for major ions, metals and diuron. The potential environmental impact of these runoff waters was evaluated using the conventional 72-h growth inhibition test with the green alga Pseudokirchneriella subcapitata. The results suggested that the toxicity detected in the calcareous vineyard field was due to the presence of diuron, whereas the non-calcareous runoff waters were non-toxic. Chemical speciation modelling by MINEQL revealed that most of the copper present in the non-toxic natural runoff waters was complexed by organic matter. These samples were spiked with copper, and then the toxicity and the electrochemically bioavailable copper fraction were measured. Differential pulse anodic stripping voltammetry (DPASV) was used to detect labile complexes and free copper. This combined approach highlighted the presence of some labile copper complexes in samples reaching the EC10-these could have contributed to the copper toxicity.     

Material requirements for the adoption of unconventional silicon crystal and wafer growth techniques for high‐efficiency solar cells

Silicon wafers comprise approximately 40% of crystalline silicon module cost and represent an area of great technological innovation potential. Paradoxically, unconventional wafer‐growth techniques have thus far failed to displace multicrystalline and Czochralski silicon, despite four decades of innovation. One of the shortcomings of most unconventional materials has been a persistent carrier lifetime deficit in comparison to established wafer technologies, which limits the device efficiency potential. In this perspective article, we review a defect‐management framework that has proven successful in enabling millisecond lifetimes in kerfless and cast materials. Control of dislocations and slowly diffusing metal point defects during growth, coupled to effective control of fast‐diffusing species during cell processing, is critical to enable high cell efficiencies. To accelerate the pace of novel wafer development, we discuss approaches to rapidly evaluate the device efficiency potential of unconventional wafers from injection‐dependent lifetime measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of process parameters on the quality of aluminium alloy Al5Si deposits in wire and arc additive manufacturing using a cold metal transfer process

A 3D print device using a cold metal transfer arc welding station to melt a metallic filler wire is developed to build aluminium part by optimising the process parameters. First tests achieved using standard pre-recorded process parameters allow to study the effect of the travel speed and the average welding power on the geometrical characteristics of mono-layer deposits and on walls built by layers superposition. Finally, a parametric study of the effect of each process parameter controlling the shape of the arc current or voltage and the filler wire feeding is carried out in order to try to improve the geometrical regularity of the deposits, and to better understand the effect of each parameter on the melting of the filler wire, its transfer on the support plate, and the geometry of the formed bead.     

Probabilistic seismic damage assessment of reinforced concrete buildings considering directionality effects

Most of buildings and structures are usually projected according to two main axes. However, the geographical position of these buildings varies randomly. Such random distributions of the azimuthal positions of structures, in most of the cities, generally, are not accounted for when assessing their seismic risk; certainly, the direction of the seismic loads is another highly random variable. Moreover, an additional important source of uncertainty is related to the structural response, mainly due to the random character of the mechanical properties. There is a consensus that uncertainties must be considered for adequately assessing the seismic risk of structures, but these directionality effects have not been deeply explored so far. In this article, the influence of the high uncertainty involved in these input variables on the expected seismic damage is analysed. Thus, an actual earthquake, which affected the southern part of Spain, is studied. Notably, damages on a group of affected buildings, located close to the epicentre, are analysed and discussed in detail. The results show that the influence of the random azimuthal position of structures is an important source of uncertainty and that it should be taken into account when estimating the expected seismic risk in urban areas.