A method of determining the advanced angle of square-wave currentsin a bearingless switched reluctance motor

Bearingless switched reluctance motors, which can control rotor radial positions with magnetic force, have been proposed. These motors have combined the characteristics of switched reluctance motors and magnetic bearings. This paper proposes a method of determining the advanced angle of square-wave currents in a bearingless switched reluctance motor. Under any torque condition, from no load to full load, stable operation is realized by controlling the advanced angle of square-wave currents with the proposed method. It is shown experimentally that the proposed method is effective in realizing stable operation     

Radiation of X-Rays Using Polarized LiNbO3 Single Crystal in Low-Pressure Ambient Gas

The dependence of X-ray intensity on the pressure and type of ambient gas was investigated for LiNbO₃ single crystals polarized in the c-axis direction at pressures of approximately 1 to 30 Pa. Ionization of surrounding gas molecules by the electric field generated by the crystal led to the production of both positive ions and free electrons. The electrons were accelerated toward a Cu target, radiating both white X-rays and X-rays specific to the crystal or target material by bremsstrahlung. The integrated X-ray intensity per cycle in the energy range 1 to 20 keV showed a local maximum value at a pressure P_max. The logarithm of P_max was proportional to the Boltzmann factor using the first ionization energy of each ambient gas molecule. The value of P_max was found to be independent of the electrical surface area of the crystal. The integrated X-ray intensity was approximated qualitatively by a quadratic function with pressure, which was upwardly convex. It was found that one of the causes of the reduction in X-ray intensity at pressures P > P_max is the adsorption of positive ions generated by the ionization of gas molecules on the negative electric surface. It was also discovered that the lifetime of the X-ray radiation device could be improved when the X-ray radiation case was covered with another hermetically sealed decompression case. The gas with the smallest first ionization energy, with a partial pressure of P_max, was enclosed inside the X-ray radiation case (inner case) and the gas with the largest first ionization energy was enclosed at a suitable pressure between the inner and outer cases.     

Vibration Suppression of a Flexible Shaft With a Simplified Bearingless Induction Motor Drive

In this paper, we present new strategies of vibration suppression in flexible shaft of a motor with active and passive magnetic forces. Shaft magnetic damping originates from the principle of a bearingless motor having a radial magnetic force generation. Radial force is used for shaft vibration suppression to go through the first critical speed. Simplifications are described in a suppression force system. We propose the elimination of a power source with self-excitation, as well as the elimination of sensors, controllers, and inverters, although the effectiveness is limited.     

BLM (the causative gene of Bloom syndrome) protein translocation into the nucleus by a nuclear localization signal

Bloom syndrome (BS) is a rare genetic disorder characterized by small body size, sun sensitivity, immunodeficiency and a high predisposition to various types of cancer. BLM was identified as the causative gene for BS, and BLM protein is homologous to DNA helicase. There are two putative nuclear localization signals (NLSs) within amino acid residues 1334-1349 in the C-terminus of the BLM protein, which has the distinctive structure of two basic residue arms separated by a spacer. The entire coding or deleted BLM sequences of various sizes were ligated into an enhanced green fluorescent protein (EGFP) vector and transfected into HeLa cells. The EGFP vector harboring the entire BLM coding sequence was transported to the nucleus. The BLM protein truncated at 1341 amino acid, containing an intact helicase domain and only one proximal arm, was not transported to the nucleus. The BLM protein truncated at 1357 amino acid, containing an intact helicase domain and two arms, was transported to the nucleus. The EGFP vector harboring DNA fragments encoding a protein having only the distal arms of basic amino acids in the C-terminus was also transported to the nucleus. The truncated BLM proteins corresponding to previously reported mutated BLM proteins were retained in the cytoplasm or both the cytoplasm and the nucleus as was the EGFP vector with no insert. These results show that the BLM protein translocates into the nucleus and that the distal arm of the bipartite basic residues in the C-terminus of the BLM protein is essential for targeting the nucleus.     

Remote sensing system for spatial electric field strength using free space light transmission

Most of the breakdowns in an electric power system are caused by lightning to the tower used for high‐voltage transmission wires. To avoid accidents due to lightning, it would be desirable to develop a measurement system for the spatial electric field distribution around the tower. We have developed a new system that can measure the electric field around the steel tower for electric power transmission by using an optical electric sensor. In conventional methods, the sensor is generally illuminated by light transmitted by optical fibers. On the other hand, the new measurement system illuminates the Pockels sensor directly by using a laser to measure the far electric field. Furthermore, our newly proposed feedback system makes it possible to measure the spatial electric field without concern for the change of Pockels sensor's operation point influenced by temperature change. This system is applicable as a remote sensing system to monitor the spatial electric field around a high‐voltage transmission line. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 10–19, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20552     

An improved control method of buried-type IPM bearingless motors considering magnetic saturation and magnetic pull variation

An improved control method of the buried-type interior permanent magnet (IPM) bearingless motors has been presented. It is shown that the conventional method is not applicable to this type of IPM bearingless motor for loaded conditions. In IPM bearingless motors, the armature reaction flux is present due to high magnetic permeance with thin permanent magnets and small airgap length. An increase in d-axis flux linkage is caused by armature reaction as a torque-component flux is increased. Thus, it is likely that magnetic saturation occurs in the stator teeth. In addition, a magnetic attractive force caused by the displacement force factor is dependent on the armature reaction flux. A new decoupling controller for the IPM bearingless motor considering magnetic saturation is proposed in this paper. It also considers the influence of magnetic attractive force variations. In addition, a new parameter identification method for the decoupling controller is also proposed. The new controller is found quite suitable to realize successful stable operation of the experimental IPM bearingless motor.     

New surface forces apparatus using two-beam interferometry

We designed a new surface forces apparatus for measuring the interactions between two nontransparent substrates and/or in nontransparent liquids. The small displacement of a surface, the bottom one in this study, was measured by the two-beam (twin path) interferometry technique using the phase difference between the laser light reflected by the fixed mirror and that by the mirror on the back of the bottom surface unit. It is possible to determine the distance with a resolution of 1 nm in the working range of 5 microm. This apparatus was successfully applied to measure the forces between mica surfaces in pure water and aqueous KBr solutions.     

Light scattering studies on crystallization in polyethylene terephthalate

The light scattering from the spherulites of polyethylene terephthalate grown near the glass transition temperature has been investigated. The Hv scattering profiles can be reproduced by the sum of the ideal spherulite scattering with the distribution of spherulite radius and the isotropic scattering from randomly oriented crystallites. The ratio of optical anisotropies in the isotropic scattering to the ideal spherulite scattering is obtained by the method established to eliminate the effects of the number density of spherulites and the coefficient depending on the experimental conditions. It is found that the anisotropy ratio is almost independent of the crystallization time and of temperature above 106 °C, while it is larger at a crystallization temperature of 103 °C. The spherulitic structure is discussed in terms of the anisotropy ratio.