辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响

研究辊速差对连铸连轧7075铝板显微组织、织构及力学性能的影响。采用3种不同上辊/下辊转速比(ω/ω0,ω为上辊转速,ω0为下辊转速)1:1、1:1.2及1:1.4进行多次试验。结果显示,在最大辊速差条件下(ω/ω0=1:1.4),7075铝板在轧制方向的屈服强度和极限抗拉强度分别提高41.5%和21.9%。此外,当辊速比ω/ω0为1:1.4时,成品轧制板的平均晶粒尺寸减小36%,横剖面平均硬度增加约9.2%。织构研究结果显示,辊速差越大,成品各向同性及硬度越大。然而,采用不同辊速度的连铸连轧会导致变形板伸长率降低约6%。     

An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.     

A straightforward one-pot synthesis of Pd–Ag supported on activated carbon as a robust catalyst toward ethanol electrooxidation

Direct Ethanol Fuel Cells (DEFCs) have fascinated remarkable attention on account of their high current density and being environmentally friendly. Developing efficient and durable catalysts with a simple and fast method is a great challenge in the practical applications of DEFCs. To this end, the bimetallic Pd–Ag with adjustable Pd:Ag ratios were synthesized via a simple and one-pot strategy on activated carbon as a support in this study. The Pd–Ag/C catalysts with different molar ratios were synthesized by simultaneous reduction of Pd and Ag ions in the presence of the ethanolic sodium hydroxide as a green reducing agent for the first time. Several different methods, including FE-SEM, HR-TEM, XRD, XPS EDX, ICP-OES, and BET were used to confirm the structure and morphology of the catalysts. The performance of catalysts was also examined in ethanol oxidation. Obtained results of electrochemical experiments revealed that the Pd₃–Ag₁/C catalyst had superior catalytic activity (2911.98 mAmg^?1_Pd), durability, and long-stability compared to the other catalysts. The excellent catalytic characteristic can be attributed to the synergistic effect between Pd and Ag. We presume that our simple method have the chance to be utilized as a proper method for the synthesis of fuel cell catalysts.     

Aging of novel membranes made of PVA and cellulose nanocrystals extracted from Egyptian rice husk manufactured by compression moulding process

Novel membranes consisting of polyvinyl alcohol (PVA), cellulose nanocrystals (CNCs) originated from Rice Husk (RH), Glutaraldehyde (GLA) and Glycerine (G) were manufactured by the compression moulding process. Rice husk is a new source to isolate pure cellulose nanocrystals via mechanical and chemical treatment. The biodegradability of the membranes has been evaluated using UV accelerated weathering as well as a soil burial test. The morphology of membranes (PVA/RH-CNCs) was characterized by using the Scanning Electron Microscope (SEM). The chemical structure of the membranes (PVA/RH-CNCs) was characterised by Fourier-Transformation Infrared (FTIR) spectroscopy as well as wide-angle X-ray diffraction. The mechanical properties of the membranes were evaluated using standard techniques. Swelling and weight loss resulting from biodegradation were also evaluated. The results showed that the developed transient membranes can be used as food packaging bags owing to biodegradability (weight loss) under irradiation and during soil burial.     

The effects of catalyst and deactivator species in atom transfer radical polymerization of n-butyl methacrylate

Iranian Polymer Journal - Atom transfer radical polymerization (ATRP) of n-butyl methacrylate (n-BMA) was performed using CuIBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA)...     

Wear Behavior of Biodegradable Mg–5Zn–1Y–(0–1)Ca Magnesium Alloy in Simulated Body Fluid

Metals and Materials International - In this study, wear behavior of biodegradable Mg–5Zn–1Y–(0–1)Ca alloys is investigated in simulated body fluid. Wear test is performed...     

A journey across the solid state polymerization to assess the role of critical factors influencing the molecular weight of polylactic acid

Solid state polymerization (SSP) offers an effective route for synthesizing green polymers with variable molecular weights depending on polymerization condition. In this work, critical factors governing the molecular weight of polylactic acid (PLA) in the course of SSP are manipulated systematically and their contributions to the efficiency of SSP process are discussed. The initial molecular weight of the prepolymer formed, the degree of crystallinity of prepolymer, and the SSP time are changed and analyzed for their effects through different analyses including differential scanning calorimetry, gel permeation chromatography, and Fourier‐transform infrared spectroscopy techniques. It was observed that PLA having highest molecular weight would be the result of formation of a prepolymer having low‐molecular weight, as detected by the analysis of functional group concentration. For the optimized sample, the rate of mass loss in SSP was 12,263 g/mol.day and a crystallinity drop over the hydrolysis process was 3.14 per day. The crystallinity of prepolymers was optimized at ca. 26% in regard with the PLA showing the highest molecular weight. J. VINYL ADDIT. TECHNOL., 25:165–171, 2019. © 2018 Society of Plastics Engineers     

Effect of different levels of fat and inulin on the microbial growth and metabolites in probiotic yogurt containing nonviable bacteria

Effects of different levels of fat and inulin on bacterial cell counts, degree of proteolysis and concentrations of organic acids in the yogurt containing inactivated cells of probiotic strains Bifidobacterium animalis and Lactobacillus acidophilus were investigated. Results showed that both L. acidophilus and B. animalis grew well in the yogurt samples reaching cell counts higher than 10⁶ CFU mL^?1 at the final pH of 4.5. Inulin at the concentration of 1% had no significant effects on the production of organic acids and cell counts of L. acidophilus, but promoted the growth of B. animalis with a reduction in the degree of proteolysis. Generally, different fat levels showed significant effects on the production of organic acids and nonsignificant effects on the cell counts of probiotic bacteria and degree of proteolysis. In case of lactic acid, the ratio of L‐ (+)to D‐ (?) isomer ranged from 50/50 to 80/20 in yogurt samples.     

Equilibrium and kinetic studies of azo dye (Basic Red 18) adsorption onto montmorillonite: Numerical simulation and laboratory experiments

Adsorption of BR 18 dye onto nano-clay adsorbent was investigated. Nano-clay was characterized by using FTIR, SEM, TEM, XRD and BET analysis. The percent removal increased by increasing nano-clay dose, while pH and stirring speed had no significant effect on the adsorption rate. It was observed that the uptake of dye onto nano-clay initially increased rapidly, and then decreased slowly until the equilibrium was reached. The adsorption capacity rose with an increase in temperature. Moreover, the adsorption kinetics was very fast and followed a pseudo second-order. The intra-particle diffusion was observed to be the rate-controlling step. In addition, equilibrium data fitted well with the Langmuir adsorption model. This paper also presents a numerical simulation incorporating the second-order kinetic expression using COMSOL Multiphysics software. The numerical modelling results and the experimental data were in excellent agreement.