Fabrication and Characterization of Nanostructured AACVD Thin Films on 316L SS as Surface Protective Layers in Simulated Body Fluid

Metallurgical and Materials Transactions A - The surface of implant materials is one of the most significant factors for controlling the interaction between biomaterials and bone tissues. Hence,...     

Production of calcium nitrate crystals via membrane distillation crystallization using polyvinylidene fluoride/sorbitan trioleate membranes

As an alternative to the energy-intensive evaporation-crystallization method, membrane distillation crystallization (MDC) was applied for the first time to obtain calcium nitrate crystals from its aqueous solution. Calcium nitrate solution was obtained through the reaction between calcium carbonate and nitric acid, and then it was concentrated in the membrane distillation (MD) process and further crystallized. The MD step was conducted using hydrophobic polyvinylidene fluoride (PVDF)/sorbitan trioleate (Span 85) membranes. Span 85 was incorporated into the membrane structure in various concentrations to improve the hydrophobicity of membranes, and the resultant membranes were characterized via different methods. In addition, the resultant calcium nitrate crystals were characterized by X-ray fluorescence (XRF) spectroscopy. The MDC results showed that the optimum amount of Span 85 in the polymeric solution was 4%, which led to the formation of a membrane with higher porosity (67.2%) and water contact angle (95.7°) compared to the neat PVDF membrane. The mentioned membrane exhibited the highest water flux in the MD process compared to the other membranes, and also it produced the highest amount of crystals due to its remarkably better performance in the MD step in terms of feed concentration.     

Barium promoted manganese oxide catalysts in low-temperature methane catalytic combustion

In this study, a series of BaO-MnO_x mixed oxide catalysts were synthesized by the mechanochemical method and employed in lean methane catalytic combustion (MCC) at low temperatures. The synthesized catalysts were characterized by XRD, BET, TGA, FT-IR, H₂-TPR, O₂-TPD, and FESEM analyses. The results indicated that the 10 wt% BaO-MnO_x catalyst with a BET surface area of 25 m² g^?1 possessed the best catalytic performance. The higher activity of the 10 wt% BaO-MnO_x catalyst was due to the higher ability to supply oxygen through the components during the MCC process. The light-off temperature corresponding to 50% of the methane conversion was about 330 °C, which was about 50 °C lower than the pure MnO_x. Moreover, for the BaO(10)-MnO_x catalyst, the 10 and 90% of methane conversion temperatures were about 305 and 427 °C, respectively. Also, the 10 wt% BaO-MnO_x catalyst exhibited high catalytic stability under dry feed condition at 450 °C for 50 h. Furthermore, the influence of various parameters such as calcination temperature, feed ratio, GHSV, pretreatment condition, and presence of water vapor in the feedstock was studied on the catalytic performance.     

Improved rheological properties and stability of multiwalled carbon nanotubes/polymer in harsh environment

This work aims to improve the rheological properties and stability of multiwalled carbon nanotubes (MWCNTs)/acrylamide (AA) base skeleton polymer blends at harsh environment of high salinity-high temperature (HS-HT) or various pH. Different co/terpolymers have been accomplished to modify the structure of AA polymer by free-radical copolymerization of AA-based monomers. Anionic, cationic, and hydrophobic functional groups were used for the synthesis of polyelectrolyte, polyampholytic, and partially hydrophobic AA polymer types. The conversion, molecular weight, and poly dispersity of co/terpolymers have been evaluated by nuclear magnetic resonance (¹H-NMR), gel permeation chromatography, and differential scanning calorimetry analysis. The effects of sonication power, concentration of polymer, and concentration of MWCNTs were also investigated on rheological behavior of co/terpolymers. The results show that negative polyelectrolyte and polyampholytic polymers are the best candidates for the improvement of MWCNTs/polymer stability and viscosity at HS-HT and alkali environment, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47205.     

Efficacy of synbiotic supplementation in patients with nonalcoholic fatty liver disease: A systematic review and meta-analysis of clinical trials: Synbiotic supplementation and NAFLD

ABSTRACT

Objective: We systematically reviewed available randomized clinical trials (RCTs) to elucidate the overall effects of synbiotic supplementation in patients with nonalcoholic fatty liver disease (NAFLD).

Methods: PubMed, Scopus, ISI Web of science and Google Scholar were searched up to December, 2017. All RCTs using synbiotic supplements to treat NAFLD included in this systematic review and meta-analysis. Mean Difference (MD) was pooled using a random-effects model.

Results: Eleven eligible databases from seven RCTs were identified for the present meta-analysis. Our results showed that synbiotic supplementation can decrease body weight, fasting blood sugar, insulin, low density lipoprotein cholesterol, total cholesterol, triglyceride, high-sensitivity C-reactive protein, tumor necrosis factor alpha, alanine transaminase and aspartate transaminase levels among patients with NAFLD. In contrast, synbiotic did not have favorable effects on body mass index (BMI), waist circumference, homeostasis model assessment for insulin resistance (HOMA-IR), and high density lipoprotein cholesterol (HDL) levels compared with the placebo group.

Conclusion: The current study revealed that synbiotic supplementation has favorable effect on inflammatory factors, liver enzymes and some anthropometric indices, lipid profiles and glucose homeostasis parameters in patients with NAFLD.     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.     

Laboratory evaluation of interfacial mechanical properties in geogrid-reinforced bituminous layers

In this study, the mechanical properties of composite bituminous structures with geogrid products, used as an interlayer between different types of bituminous mixtures, at a constant temperature, were examined. A twofold experimental program based on new approaches was selected. A new configuration of the 3-Point Bending Test (3-PBT) was adopted to capture the J-integral and crack resistance property defined by crack resistance index (CRI) at the interface against bottom-up crack propagation. The bonding quality at the interface was also defined through a new index named coefficient of interface bonding (CIB), which was measured via a modified version of the slant shear device. The results derived from this research revealed that reinforcement of the interface, with varying degree of surface texture, by geogrid products significantly enhances the fracture toughness of the whole system in terms of the J-integral, which could be properly connected to the combined functions of bonding quality and crack resistance indices defined at the interface.