Droplet Entrainment Analysis in a Flash Evaporator with an Image-Based Measurement Technique

Local droplet sizes and volumes of entrained liquid are captured with an image-based measurement technique for comparison with a conventional, integral method for entrainment analysis. Experiments in a forced circulation flash evaporation were performed for different operating conditions and with two different chemical systems. Droplet size and frequency rise with an increase in thermal energy input. The local readings confirm the trends found by the integral measurement method. The modification of the image-based probe enables the detection of small (≈ 10 µm) and at the same time fast droplets under challenging operating conditions, such as vacuum and superheated feed similar to industrial process conditions.     

In-milk inactivation of Escherichia coli O157:H7 by the environmental lytic bacteriophage ECPS-6

Shiga toxin-producing Escherichia coli is a common foodborne pathogen which transmission includes dairy products. In the search for novel biocontrol methods, bacteriophages have become important candidates for the eradication of foodborne pathogens. The aim of this study was to evaluate the bacteriophage-mediated reduction of E. coli O157:H7 in raw and filtered milk. Laboratory-scale tests showed that the bacteriophage ECPS-6 efficiently adsorbed to E. coli O157: H7 cells. Furthermore, ECPS-6 remained stable when heated at 70°C for 20 min and in a wide pH range from 3.0 to 11.0. The trials on contaminated milk were performed using filtered and unfiltered raw milk contaminated with 1 × 10⁵ CFU × ml⁻¹ of E. coli O157: H7. Bacteriophage was added at multiplicity of infection (MOI) 5 and 50. The ECPS-6 reached the highest lytic activity at MOI = 5 (25°C) which resulted in 4.74 Log₁₀ CFU × ml⁻¹ and 7.3 Log₁₀ CFU × ml⁻¹ reduction after 10 days for both tested strains, respectively. Under refrigerated conditions (4°C) the quantity of E. coli decreased to 1.5 Log₁₀ CFU × ml⁻¹ and 3.04 Log₁₀ CFU × ml⁻¹ for these strains, respectively. Usage of MOI = 50 for the treatment unfiltered milk led to the reduction of E. coli O157:H7 A-2 below the detection limit after 6 hr.     

Local analysis of Marangoni effects during and after droplet formation

The influence on the mass transfer in liquid-liquid extraction was investigated during droplet formation in a quiescent aqueous continuous phase for the two transition components, acetone and acetonitrile, in toluene. Both transition components have similar characteristics. However, an approximately eight times slower mass transfer of a droplet hanging on a capillary in relation to a rising droplet could be observed. The droplet formation time and the initial solute concentration are decisive for the mass transfer behaviour. A lower volumetric flow leads to slower droplet formation and a higher specific mass transfer area enhancing mass transfer, which is visualized via laser induced fluorescence (LIF). Additionally, as expected, higher initial solute concentrations promote Marangoni turbulences and thus mass transfer, which is measured via confocal Raman spectroscopy inside a fixed hanging droplet.     

Digital Extraction Column: Measurement and Modeling Techniques

The digitization of extraction columns requires a profound knowledge of the present hydrodynamics/mass transport interaction as well as appropriate measurement techniques for the detection of relevant input and target values. In this article, the different techniques for droplet size distribution as well as concentration determination are presented and new methods for online evaluation are discussed. In combination with the simulation of droplet size, holdup and solute concentration distribution, an online-capable process tool for controlling and optimizing extraction columns will be obtained.     

Synthesis and properties of YBa2Cu3O7-δ – Y2Ba4CuWO10.8 superconducting composites

YBa₂Cu₃O_7-δ (YBCO) is a well-known high-temperature superconductor. However, its critical current density and thus maximum trapped magnetic field can be improved significantly by introducing the secondary phases (artificial pinning centers). In this contribution, we successfully prepared YBCO single-grain bulks with Y₂Ba₄CuWO_10.8 phase serving as a source of pinning centers. This phase was prepared by solid-state reaction and further refined by milling. In the next step single-grain YBCO bulks with homogeneously distributed Y₂Ba₄CuWO_10.8 were prepared by top-seeded melt growth. Precursors as well as the final product were characterized by XRD, SEM and EDS. The phase composition of YBCO bulks containing Y₂Ba₄CuWO_10.8 was analyzed using Rietveld analysis. Thermal stability of YBCO bulk was studied by STA. Furthermore, PPMS was used to study electrical resistivity and critical current density. Bulk superconducting properties such as levitation force and trapped field ability were also measured.     

Effect of Al2O3 Addition on Mineralogical Modification and Crystallization Kinetics of a High Basicity BOF Steel Slag

Metallurgical and Materials Transactions B - Basic oxygen furnace (BOF) steel slag is a main byproduct that is produced during the converter steelmaking process. The volume instability and fast...     

Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

Mesoporous drug carrier systems for enhanced delivery rate of poorly water-soluble drug: nimodipine

Journal of Porous Materials - Two mesoporous silica materials: MCM-41 and SBA-15 were applied as potential nanocarriers for poorly soluble drug—nimodipine. Drug incorporation was performed...     

Adventitial Tertiary Lymphoid Organs as Potential Source of MicroRNA Biomarkers for Abdominal Aortic Aneurysm

Abdominal aortic aneurysm (AAA) is an inflammatory disease associated with marked changes in the cellular composition of the aortic wall. This study aims to identify microRNA (miRNA) expression in aneurysmal inflammatory cells isolated by laser microdissection from human tissue samples. The distribution of inflammatory cells (neutrophils, B and T lymphocytes, mast cells) was evaluated in human AAA biopsies. We observed in half of the samples that adventitial tertiary lymphoid organs (ATLOs) with a thickness from 0.5 to 2 mm were located exclusively in the adventitia. Out of the 850 miRNA that were screened by microarray in isolated ATLOs (n = 2), 164 miRNAs were detected in ATLOs. The three miRNAs (miR-15a-3p, miR-30a-5p and miR-489-3p) with the highest expression levels were chosen and their expression quantified by RT-PCR in isolated ATLOs (n = 4), M1 (n = 2) and M2 macrophages (n = 2) and entire aneurysmal biopsies (n = 3). Except for the miR-30a-5p, a similar modulation was found in ATLOs and the two subtypes of macrophages. The modulated miRNAs were then evaluated in the plasma of AAA patients for their potential as AAA biomarkers. Our data emphasize the potential of miR-15a-3p and miR-30a-5p as biomarkers of AAA but also as triggers of ATLO evolution. Further investigations will be required to evaluate their targets in order to better understand AAA pathophysiology.