Linolenic acid deficiency: Changes in fatty acid patterns in female and male rats raised on a linolenic acid-deficient diet for two generations

Rats were fed for two generations a purified, linolenic acid-deficient diet in which the only source of lipid was purified methyl linoleate. This diet contained about 38 mg linolenic acid/kg diet. Control rats were given the same diet supplemented with methyl linolenate (2,500 mg/kg diet). Male and female rats ranged in age from weanling pups to adults. Lipids were extracted from liver, brain, kidney, spleen, heart, muscle, gastrointestinal tract, lung, ovary, testis, adrenal, plasma, erythrocytes, retina, and adipose tissue. Fatty acids of major phospholipid classes (choline phosphoglycerides, ethanolamine phosphoglycerides, and mixed serine phosphoglycerides plus inositol phosphoglycerides) or of total lipid extracts were measured by gas liquid chromatography. Growth rates and organ weights were similar in control and linolenic acid-deficient rats. The major effect of the deficiency was to lower the proportions of n−3 fatty acids, especially 22∶6 n−3, in all the organs analyzed. Docosahexaenoic acid (22∶6 n−3) was mainly replaced by 22∶5 n−6 in deficient rats. The greatest changes in composition were found in brain, heart, muscle, retina, and liver.     

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.     

Comparative evaluation of chlamydiazyme, PACE 2, and AMP-CT assays for detection of Chlamydia trachomatis in endocervical specimens

We conducted a comparative evaluation of the Chlamydiazyme (Abbott Laboratories), PACE 2 (Gen-Probe), and AMP-CT (Gen-Probe) assays for the detection of Chlamydia trachomatis in endocervical samples. Specimens from 787 females were included in the study. The sensitivities of the PACE 2 and Chlamydiazyme assays in comparison to the results of the AMP-CT assay were 79.3 and 63.4%, respectively. The specificities of the Chlamydiazyme and PACE 2 assays were 100%. All of the positive specimens detected in this study were positive by the AMP-CT assay. On the basis of the final results of the comparison, the prevalence of C. trachomatis in the population was 10.4%. Retesting of specimens whose results were in the intermediate zone by the PACE 2 assay by a probe competition assay identified some additional true-positive specimens. Amplification assay testing of such specimens did not significantly increase the yield. The majority of specimens which tested positive by the AMP-CT assay only were not in the intermediate zone by the PACE 2 assay. We were unable to identify demographic or clinical factors which could predict those individuals who tested positive by amplified tests but not by nonamplified tests. The Gen-Probe PACE 2 assay proved to be superior to the Chlamydiazyme assay for the screening and diagnosis of C. trachomatis infections in female endocervical specimens.     

Linolenic acid deficiency

Linolenic acid deficiency has not been demonstrated clearly in warm blooded animals, yet circumstantial evidence suggests that n−3 fatty acids may have functions in these animals. The fact that several species of fish definitely require dietary n−3 fatty acids indicates that n−3 fatty acids have important and specific functions in these animals and suggests that such functions may also be present in warm blooded animals. It is also true that n−3 fatty acid distribution in tissues of birds and mammals appears to be under strict metabolic control, and that this complex metabolic control mechanism apparently has survived evolutionary pressure for a very long time. So far, attempts to produce linolenic acid deficiency in mammals have not revealed an absolute requirement for n−3 fatty acids. If functions for n−3 fatty acids do exist in warm blooded animals, it seems probable that they may be located in the cerebral cortex or in the retina, because these tissues normally contain high concentrations of n−3 fatty acids.     

Investigation of steel containment buckling under dynamic loads

Buckling of freestanding nuclear steel containment buildings from dynamic base excitation was investigated in a combined experimental/numerical program. A polycarbonate scale model of a containment building was excited with scaled earthquake transients and single-frequency harmonic transients to determine the peak base acceleration levels required to induce buckling. Buckling was identified using recorded signals from strain gages and accelerometers, with high-speed video records, and by audibility. Experimental results are compared with numerical results obtained by using a freezing-in-time technique. The results are preliminary, since several more tests are to be performed. However, the limited data obtained indicate that the freezing-in-time technique approximates the required acceleration levels reasonably well, although not conservatively. Additional experiments are described that will take containment asymmetries into account, as well as use instrumentation that will provide more accurate measures of the occurrence of buckling.     

EFFECT OF GLASS COLOR ON SETTING RATES IN MANUFACTURE OF GLASS BOTTLES *

It has been observed in the manufacture of bottles of the same size and shape from various colored glasses, such as emerald green and amber and the so-called flint bottle glass, that higher machine speeds are usually obtained in the case of the colored glasses. A laboratory test has been devised to measure the cooling rates of several colored and colorless glasses throughout their respective working ranges, which gives results paralleling the speeds obtained in actual bottle manufacture.     

PREDICTION OF MICROPORE GROWTH DURING GASIFICATION REACTIONS

The concept of changing pore geometry during the course of a reaction allows the microscopic solid-gas reaction models to have the potential to describe the porosity change during the reaction. However, only the bulk porous properties can be predicted due to the pore size range chosen for most of these models. The two population systems, micropore and macropore, chosen by the model of Zygourakls et al. [1] provides a method for predicting micropore property changes. However, this model over-predicts micropore property changes because it assumes that the average micropore radius is enlarged. By examining several sets of published carbon gasification data, it is shown that the average micropore radii are not enlarged by gasification. The commonly-used concept that reaction will enlarge all the pore radii is the major reason for the prediction error. A new concept is proposed in which the reaction will not enlarge the size of the micropores and will maintain a constant micropore length by reacting at both ends of micropores at equal rates. Based upon this concept, the model of Zygourakls et al. [1] has been modified. Both the original and the modified models can predict the gasification rate well by utilizing data from the carbon activation study of Yanai [2]. The model of Zygourakls et al. [1] gives a micropore surface area change close to the measured value, but the reaction enlarged micropores result in predicting high of values of micropore volume changes and average micropore sizes. The steady-state micropore concept used in the improved model predicts more realistic micropore property changes.     

A novel approach for modeling deregulated electricity markets

The theoretical framework developed in this study allows development of a model of deregulated electricity markets that explains two familiar empirical findings; the existence of forward premiums and price-cost markups in the spot market. This is a significant contribution because electricity forward premiums have been previously explained exclusively by the assumptions of perfect competition and risk-averse behavior while spot markups are generally the outcome of a body of literature assuming oligopolistic competition. Our theoretical framework indicates that a certain premium for forward contracting is required for efficient allocation of generation capacity. However, due to the uniqueness of electricity and the design of deregulated electricity markets this premium might be substantially higher than its optimal level.     

Kinetic and spectroscopic properties of the YZ* radical in Ca2+- and Cl--depleted photosystem II preparations

Depletion of Ca2+ and/or Cl- ions from PSII membranes blocks the electron-transfer reactions that precede O2 evolution on the oxidizing side of the enzyme. Illumination of these inhibited preparations at 273 K generates a paramagnetic species that is detectable by low-temperature (T < 20 K) EPR as a signal in the g = 2 region, 90-230 G wide, depending on the treatment that PSII has undergone. This signal has recently been assigned to YZ* in magnetic interaction with the manganese cluster in its S2 state [Gilchrist et al. (1995) Proc. Natl. Acad. Sci. U.S.A. 92, 9545-9549]. This view, however, is not universal, owing, in part, to the fact that its spectroscopic properties depend on the preparation and the experimental conditions used for its study and, in part, to uncertainties as to the room temperature behavior of YZ* in inhibited preparations. Here, we report time-resolved and conventional EPR data showing that, at room temperature and at 273 K, YZ* can be accumulated in its 20 G form in high yields in both Ca2+-depleted and acetate-inhibited preparations, and that the kinetics of its decay match the decay kinetics of the low-temperature signal generated in corresponding samples. The properties of the YZ* signal, however, are shown to depend on the polypeptide content, the temperature, and the electron donors and acceptors present in the sample under examination. Our results support assignment of the EPR signal in inhibited preparations to S2 YZ* and demonstrate a protective role of the 17 and 23 kDa extrinsic polypeptides for the manganese cluster against externally added reductants.     

Variation of crater geometry with projectile L/D for L/D ≤ 1

A series of hydrocode calculations and terminal ballistics experiments were performed to investigate the penetration mechanics of projectiles with L/D ≤ 1. Projectile L/D ranged from 1/32 to 1; impact velocity ranged from 1.5 to 5 km/s. Projectiles were tungsten or tungsten alloy, targets were RHA. The paper concentrates on the effect of projectile L/D on the size and geometry of the target crater. Normalized crater depth (or penetration) increases with decreasing projectile L/D and achieves a maximum at about L/D=1/8 for 1.5 km/s and 1/16 for 3 km/s, and then decreases with further decrease in L/D. For 5 km/s, P/L increases with decreasing L/D over the entire range studied. P/L scales with impact velocity as P/L V^f(L/D) where, we believe, f(L/D) approaches 2 as L/D 0. The ratio of crater to projectile diameter D_c/D decreases with decreasing L/D and approaches a value of 1 as L/D approaches zero for all velocities studied. The crater shape measured by P/D_c decreases with decreasing L/D; i.e., as L/D decreases, the crater changes from approximately hemispherical for L/D = 1 to a very shallow disk shape. The kinetic energy required per unit crater volume, KE/V_c, increases with decreasing L/D for L/D < 1/4. That is, cratering efficiency decreases with decreasing projectile L/D. For the impacts studied, KE/V_c increases from about 5 kJ/cm³ to 12 kJ/cm³ as projectile L/D is reduced from 1 to 1/32.