Prevailing Research Trends in Carbon Nanohorn and Polymer-based Hybrids

This review outlines research progress on carbon nanohorn (CNH) and polymer/CNH hybrids including structure, properties, application, and future stance. Carbon nanohorn is a type of nanocarbon existing as dahlia-like, bud-like, and seed-like structures. Most widely known form is single-walled carbon nanaohorn with diameter of ～5?nm and tube length ～50?nm. Polymers such as polystyrene, polyaniline, polythiophene, poly(vinylalcohol), poly(methylmethacrylate), poly(ethyleneglycol), polycaprolactone, polyimide, poly(2-aminopyridine), and nylon have been interacted with CNH using various techniques. Structural and physical properties of fine-tuned carbon nanohorn and polymer/CNH hybrids have been used for versatile applications such as dye-sensitized solar cell, supercapacitor, drug delivery, fuel cell, and sensors.     

Surface-assembled Fe-Oxide colloidal nanoparticles for high performance electrocatalytic water oxidation

Nanoscale electrocatalytic materials having enhanced electroactive sites has been considered trendier and can drive kinetically uphill OER at much lower energy cost with high efficiency. However, very complex synthetic strategies, extensive functionalization processes, and less stability have stimulated quest for economically viable, straightforward and facile preparative methods for designing stable, robust and active nanoscale electrocatalysts engaging geologically abundant materials to ensure their industrial implications. Here we present surface-assembled Fe(OH)_x/FeO_x type colloidal catalytic thin-films, with or without post annealing, derived from Fe-colloidal NPs in simple carbonate system for efficient water oxidation. Comprehensive electrochemical studies including cyclic voltammetry, chronoamperometry, chronopotentiometry, impedance spectroscopy, Tafel slope analysis, mass activity, electrochemically active surface area measurements are conducted to comparatively evaluate the performance of simple (FeO_x/HCO₃^?@FTO and annealed (FeO_x/HCO₃^?@FTO₂₅₀, FeO_x/HCO₃^?@FTO₅₀₀) catalysts for oxygen evolution reaction (OER) under employed conditions. The FeO_x/HCO₃^?@FTO₂₅₀ annealed at 250 °C initiates water oxidation at much lower overpotential of 1.52 V vs. RHE with remarkable stability during long-term electrochemical experimentations. In addition to enhanced OER activity as evidence by better onset potential (<1.55 V vs. RHE), lower Tafel slope value (36 mV dec^1?) and negligible charge transfer resistance, the Fe(OH)_x/HCO₃^?@FTO type catalyst presented excellent electroactive nature during long term controlled potential electrolysis experiments where more and more electroactive sites were getting exposed during continuous hours of electrolysis. The catalysts behave as a potential enduring, inexpensive and competent candidate for catalyzing water oxidation reaction when tested under begin conditions.     

Synergistic effect of high-intensity ultrasound and β-cyclodextrin treatments on browning control in apple juice

This work evaluated the synergistic effects of combined high-intensity ultrasound (HIU) with β-cyclodextrin (β-CD) treatments on inhibiting browning of apple juice and explored the mechanism through simulation system. The combined treatment of 300 W HIU with 0.006 g mL⁻¹ β-CD had a synergistic impact on maintaining juice colour, resulting in a 39.06% reduction in browning degree, only a 36.64% decrease in total phenolic content, and a 17.82% reduction in PPO activity. The inhibition of enzymatic browning in simulated system revealed that HIU suppressed the enzyme (Polyphenol oxidase, PPO) and β-CD inhibited enzyme (PPO) and embedded substrate (polyphenol). The results of spectroscopic analysis showed that the particle-size distribution of PPO narrowed, the content of α-helix in the secondary structure increased, the fluorescence intensity increased, and the maximum wavelength was red-shifted after HIU and β-CD treatment. Changes in structure could further result in PPO activity loss. Hence, the combined treatment could synthetically alleviate the browning of apple juice.     

Hole Content Dependent Fluctuation Diamagnetism in YBa2Cu3O7−δ: Possible Role of the Pseudogap

Journal of Superconductivity and Novel Magnetism - This study focuses on the temperature and hole content dependent fluctuation diamagnetism of hole-doped YBa2Cu3O7?δ (Y123) high-Tc...     

Cure characterization of Cycom 977‐2A carbon/epoxy composites for quickstep processing

In this effort, Quickstep, a relatively a new technique, have been employed for manufacturing of composite materials. The cure schedule provided by a prepreg manufacturer is usually designed for autoclave or other traditional processing techniques and thermosetting resin systems are formulated for ramp rate curing 2–3 K min^?1. While in case of Quickstep processing, ramp rates of 15 K min^?1 can be achieved, thus changing the chemorheology of resin. The cure process of 977‐2A carbon/epoxy composites was evaluated for Quickstep processing using differential scanning calorimetry (DSC), dynamic mechanical and thermal analysis, and Fourier transformed infrared and results were compared with cure cycle employed for autoclave curing. Optimum hold time for Quickstep processing at upper curing temperature (180°C) was determined using DSC. The hold time of 120 min at 180°C was found to be suitable for Quickstep cure cycle, producing a panel of similar degree of cure to that achieved through autoclave processing schedule. Final degree of cure was dependent on time spent at upper cure temperature and slightly on initial steps of the cure cycle which was used to control the resin flow, fiber wetting, and void removal. Quickstep processed samples exhibited higher T_g and crosslink density and similar molecular network structure to the autoclave cured samples. POLYM. ENG. SCI., 54:887–898, 2014. © 2013 Society of Plastics Engineers     

Development of high performance amine functionalized zeolitic imidazolate framework (ZIF-8)/cellulose triacetate mixed matrix membranes for CO2/CH4 separation

High cost and complex fabrication process of inorganic membranes and lower position of pristine polymeric membranes in the Robeson upper bound curve urged the researchers to develop mixed matrix membranes (MMMs). Cellulose acetate being most commercially used polymer, dominates the market of CO₂ separation mainly because of low cost and environmental friendly resource. In the present study, MMMs consists of amine functionalized zeolitic imidazolate framework (NH₂-ZIF-8) and cellulose triacetate were fabricated for the first time. NH₂-ZIF-8 was used as a filler because the pore size of ZIF-8 is between the kinetic diameter of separating gases (CO₂ and CH₄). Moreover,  NH₂ group attached on the surface of ZIF-8 has affinity with condensable gases like CO₂. Morphology, crystallinity, tensile strength and functional groups of fabricated membranes were investigated using different analytical techniques. Results revealed that the increase of feed pressure has increased CO₂ permeability and decreased permselectivity. However, improvements in gas separation performance were observed with the addition of nanofiller. Best position in Robeson's upper bound curve at 4 bar was obtained with 10 wt% loading with CO₂ permeability and CO₂/CH₄ permselectivity of 218 barrer and 13.84, respectively. The improvement in the gas separation performance with loading is attributed to the increased diffusion coefficients as well as solubility coefficients, which was increased to 33% and 3.8%, respectively.     

Comparative Review on Structure,Properties, Fabrication Techniques,and Relevance of Polymer Nanocomposites Reinforced with Carbon Nanotube and Graphite Fillers

Owing to their remarkable electrical, mechanical, thermal, catalytic, and optical properties as well as their unique structure, carbon nanotubes and graphite have been exploited to produce high performance and multifunctional composites. The resultant composites are differentiated on the basis of their properties to meet various applications. In the framework of this review article, we have mainly focused on the preparation, structure, and properties of two families of composite materials with an emphasis on the differences between them. Moreover, the current challenges, future prospectives, and applications of carbon nanotubes- and graphite-based materials in sensors and in photovoltaic and energy storage devices (Li-ion battery) have been discussed.     

A Study on Poly(vinyl alcohol-co-ethylene)-graft-Polystyrene Reinforced with Two Functional Nanofillers

A facile route was adopted to graft polystyrene on poly(vinyl alcohol-co-ethylene) matrix. Poly(vinyl alcohol-co-ethylene)-graft-polystyrene (PVAE-g-PS) was then reinforced with two types of nanofillers, i.e., graphene oxide (GO) and nanodiamond functional graphene oxide (GO-ND). PVAE-g-PS/GO and PVAE-g-PS/GO-ND nanocomposite series reinforced with 0.1—5 wt.% nanofiller were fabricated by solution processing. Structure of nanofillers and composite was confirmed by FTIR. FESEM imaging revealed that nanodiamond functional GO platelets were fully incorporated into matrix. TGA demonstrated enhanced stability of PVAE-g-PS/GO-ND nanomposites containing GO-ND. Similarly, UL 94 and electrical conductivity measurement of GO-ND-based system were found to be superior compared to one of copolymer/GO.