Zinc oxide-decorated multiwalled carbon nanotubes: a selective electrochemical sensor for the detection of Pb(II) ion in aqueous media

Journal of Materials Science: Materials in Electronics - Multiwalled carbon nanotubes, due to high conductivity, stability, and large specific surface area, have a potential ability to promote...     

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Fast determination of critical eluent composition for polymers by gradient chromatography

Gradient chromatography was applied in order to calculate the composition at elution for different methacrylates on normal phase columns. In addition the composition at elution was determined for polyethyleneoxide on a reverse phase column. It is shown that high molar mass polymers elute for a given homopolymer irrespective of their molar mass at the same eluent composition, which varies only slightly with gradient slope. In general the composition at elution in gradient chromatography is expected to be slightly lower than the true critical composition. For high molar mass polymers we found this composition to be close to the critical composition determined by isocratic experiments. The difference between the composition at elution and the true critical composition for a variety of polymethacrylates and for polyethyleneglycol was found to be only between 0.2 and 5%. Thus, after estimating the composition at elution, only a small number of additional isocratic experiments is needed to find the exact critical composition.     

PLATOP: a novel planarized trench isolation and field oxideformation using poly-silicon

A novel isolation scheme named planarized trench isolation and field oxide formation using poly-silicon (PLATOP) Is described. PLATOP is applicable to high-performance submicron VLSI since it results in encroachment-free shallow trenches, and planarized field oxide. The process offers poly silicon-filled deep trenches. The process also relies on noncritical lithography and novel etch processes to planarize the deposited poly-silicon from the top of the active areas, and oxidation to consume the poly-silicon in the field regions. Electrical results are presented proving the viability of the isolation scheme     

Some pharmacologic and toxicologic studies on Rhazya stricta decne in rats, mice and rabbits

1. This work examines some in vivo and in vitro pharmacologic and toxicologic effects of extracts of Rhazya stricta, a medicinal plant in the United Arab Emirates. 2. R. stricta extracts at doses of 0.1-10 mg reduced the mean arterial blood pressure (MBP) of anesthetized rats in a dose-dependent manner. The depressor effect was partially sensitive to atropine (5 microM). Although the MBP was reduced by 50% by both doses of extracts, the normal electrocardiogram pattern and the heart rate remained unaltered. 3. Acute treatment of rats with the lyophilized extract at doses of 4 g/kg produced a significant rise in insulin concentration. In streptozotocin-diabetic rats loaded orally with glucose (1 g/kg), R. stricta at doses of 8 g/kg produced significant decreases in plasma glucose concentration at 0.5 and 1 h after treatment. 4. Chronic treatment of rats and mice for 28 days with the lyophilized extract of R. stricta did not affect the plasma glucose or insulin concentration or any of the hematological or biochemical indices measured. 5. The extracts of R. stricta (0.5-4 g/kg) dose-dependently decreased the gastrointestinal transit time in mice by 4-50%. 6. The butanolic extract of R. stricta (1 and 2 g/kg) significantly reduced the carrageenan-induced increase in raw paw edema 3 and 4 h after the extract administration. 7. The rectal temperatures of normothermic and pyrexic rats were reduced significantly 0.5 and 1 h after administration of butanolic R. stricta at doses of 1 and 2 g/kg. 8. The butanolic extract of R. stricta at doses of 1 and 2 g/kg significantly increased the reaction time on the hot plate 30 and 60 min after administration to rats. 9. At concentration < 0.05 mg/ml (bath concentration), lyophilized water and butanol extracts of R. stricta potentiated the twitch responses induced by indirect electrical stimulation in the rat phrenic nerve diaphragm preparation. The responses were inhibited by concentrations > 0.05 mg/ml. Neostigmine (2 x 10(-4)M) did not alter these effects of the extracts. 10. R. stricta extracts dose-dependently decreased the force of contraction and heart rate of the isolated rabbit heart. Atropine (1 x 10(-5)M) had no effect on the inhibitory activity of these extracts. The lyophilized water extract (> 10 mg) and butanol extract (> 5 mg) produced irreversible inhibition and disturbances in the force of contraction and heart rate.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

Novel Organometallic Aromatic Azo Polyesters Based on Ferrocene

Some ferrocene containing aromatic azo polyesters were prepared by condensing 1,1-ferrocenedicarbonyl chloride with different azo groups containing aromatic diols, which were synthesized by diazotization coupling reaction from aromatic diamines. The polymeric products were separated as two portions on the basis of their solubility and subsequently characterized by their elemental analysis and FTIR spectral studies. Thermal properties of the products were measured by differential scanning calorimetry and thermogravimetry and the activation energies of pyrolysis were calculated using Horowitz and Metzger's method. The molecular weights of the soluble portions were determined by gel permeation chromatography (GPC) and these portions were also characterized by their inherent viscosities and UV-Vis spectroscopic studies.     

Delay and link utilization aware routing protocol for wireless multimedia sensor networks

Wireless Multimedia Sensor Networks (WMSNs) consist of networks of interconnected devices involved in retrieving multimedia content, such as, video, audio, acoustic, and scalar data, from the environment. The goal of these networks is optimized delivery of multimedia content based on quality of service (QoS) parameters, such as delay, jitter and distortion. In multimedia communications each packet has strict playout deadlines, thus late arriving packets and lost packets are treated equally. It is a challenging task to guarantee soft delay deadlines along with energy minimization, in resource constrained, high data rate WMSNs. Conventional layered approach does not provide optimal solution for guaranteeing soft delay deadlines due to the large amount of overhead involved at each layer. Cross layer approach is fast gaining popularity, due to its ability to exploit the interdependence between different layers, to guarantee QoS constraints like latency, distortion, reliability, throughput and error rate. The paper presents a channel utilization and delay aware routing (CUDAR) protocol for WMSNs. This protocol is based on a cross-layer approach, which provides soft end-to-end delay guarantees along with efficient utilization of resources. Extensive simulation analysis of CUDAR shows that it provides better delay guarantees than existing protocols and consequently reduces jitter and distortion in WMSN communication.     

Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate

Landfill leachate is one of the most recalcitrant wastes for biotreatment and can be considered a potential source of contamination to surface and groundwater ecosystems. In the present study, Fenton oxidation was employed for degradation of stabilized landfill leachate. Response surface methodology was applied to analyze, model and optimize the process parameters, i.e. pH and reaction time as well as the initial concentrations of hydrogen peroxide and ferrous ion. Analysis of variance showed that good coefficients of determination were obtained (R2 > 0.99), thus ensuring satisfactory agreement of the second-order regression model with the experimental data. The results indicated that, pH and its quadratic effects were the main factors influencing Fenton oxidation. Furthermore, antagonistic effects between pH and other variables were observed. The optimum H2O2 concentration, Fe(II) concentration, pH and reaction time were 0.033 mol/L, 0.011 mol/L, 3 and 145 min, respectively, with 58.3% COD, 79.0% color and 82.1% iron removals.     

Performance analysis of multimedia based web traffic with QoS constraints

During the recent years, there has been a tremendous growth in the development and deployment of multimedia based networked applications such as video streaming, IP telephony, interactive games, among others. These applications, in contrast to elastic applications such as email and data sharing, are delay and delay jitter sensitive but can tolerate certain level of packet loss. A vital element of end-to-end delay and delay jitter is the random queueing delays in network switches and routers. Analysis of robust mechanisms for buffer management at network routers needs to be carried out in order to reduce end-to-end delay for traffic generated by multimedia applications. In this context, a threshold based buffer management scheme for accommodating multiple class multimedia traffic in network routers has been analysed. This technique effectively controls the allocation of buffer to various traffic classes according to their delay constraints. The forms of the joint state probabilities, as well as basic performance measures such as blocking probabilities are analytically established at equilibrium. Typical numerical experiments are included to illustrate the credibility of the proposed mechanism in the context of different quality of service (QoS) grades for various network traffic classes. This model, therefore, can be used as a powerful tool to provide a required grade of service to a particular class of multimedia based web traffic in any heterogeneous network.