Application of GA-Optimized ANNs to Predict the Water Content,CO2 and H2S Absorption Capacity of Diethanolamine (DEA) in Khangiran Gas Sweetening Plant

Theoretical Foundations of Chemical Engineering - In this work, with the aim of accurate prediction of water content, H2S and CO2 absorption capacity of diethanolamine (DEA) solvent in Khangiran...     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Evolution axiale du coefficient de transfert de matière en colonne à bulles et en lit fluidisé triphasique

Liquid phase volumetric mass transfer coefficients for oxygen are determined in a three-phase fluidized bed and in a bubble column. The concept of exponential decreasing axial variation of volumetric mass transfer coefficient leads to a better representation of oxygen concentration profiles inside the column. Compared to the bubble column, k_la axial variations are more important in the lower part of the fluidized bed column, where solid particles increase the coalescence phenomenum, particularly with viscous liquids.     

Aqueous solution of Oxone as new oxidizing agent for multi-walled carbon nanotube functionalization

In this work, multi-wall carbon nanotube (MWCNT) was successfully modified using aqueous solution of Oxone as a new oxidant. The effect of oxidation temperature on various characteristics of the treated MWCNTs was also investigated. FTIR and titration analysis proved the formation of carboxyl, carbonyl and epoxide groups at the surface of MWCNTs. The concentration of the functional groups increased as the modification temperature increased. The presence of such oxygen containing groups at the surface of MWCNTs justified the long time stability of the treated MWCNTs suspensions in water and methanol. The modified MWCNTs showed higher entanglement compared to row MWCNT due to the cross-links adjacent effect of pendant functional groups. Finally, it was concluded that Oxone oxidation process destroys the structure of the MWCNTs, but not severe enough to unzip the MWCNTs.     

Adaptive Control for State Synchronization of Nonlinear Haptic Telerobotic Systems with Asymmetric Varying Time Delays

In this paper, we introduce a new adaptive controller design scheme for nonlinear telerobotic systems with varying time delays where the delays and their variation rates are unknown. The designed controller has the ability to synchronize the state behaviors of the local and the remote robots. In this paper, asymptotic stability in the presence of varying time delays is of interest. Using the proposed controller, asymptotic stability of the bilateral telerobotic system subject to any bounded yet unknown varying delay with a bounded yet unknown rate of change can be guaranteed. Besides the varying time delay, the proposed adaptive controller has the ability to adapt to the parameter variations in the local and the remote robots’ dynamics. It is shown that position and velocity errors between the local and the remote manipulators converge to the zero asymptotically, thus ensuring teleoperation transparency. Experimental and simulation results with a pair of PHANToM haptic devices and a pair of planar manipulators under varying time delays in the communication channel demonstrate the effectiveness of the proposed scheme.     

Identification and classification of ERP critical failure factors in Iranian industries

Implementation of Enterprise Resource Planning systems (ERPs) is a complex and costly process, which usually results in serious failures. The majority of previous studies and research projects have been conducted in identifying ERP Critical Success Factors (CSFs) rather than Critical Failure Factors (CFFs). On the other hand, most studies have been devoted to developed countries, while in developing countries, many companies have moved towards using such systems. The majority of IT/IS management standards and guidelines have been developed by technologically-leading countries. But developing countries, which mostly confront with especial challenges, have a different condition from the implicit assumptions of leading countries. Iran is one of these countries that many of its ERP implementation projects led to failure. There is no comprehensive study that identifies ERP CFFs in Iranian industries. The main purpose of this study is to identify such factors and classify them to help other industries, consultants and implementers to prevent failures in the implementation of ERP projects. So, at first, with the semi structured interviews and literature reviews, 47 failure factors were identified. After that a questionnaire developed and sent to ERP project team members in Iranian industries that failed in their ERP projects. Robust Exploratory Factor Analysis (EFA) has been used for data analysis, which finally classified critical failure factors in seven groups named as vendor and consultant, human resources, managerial, project management, processes, organizational and technical. The results of this study have provided a very useful reference for scholars and managers to identify the relevant issues of ERP projects failure in developing countries.     

Dynamic modeling of DC arc discharge on ice surfaces

A dynamic model for predicting DC arc behavior and critical flashover voltage of ice-covered insulating surfaces is presented. The model takes into consideration insulating geometry, pre-contamination level, and characteristics of ice layers. Assuming arc behavior as a time dependant impedance, it is possible to determine various arc characteristics such as time histories of leakage currents, potential gradient, channel radius, trajectory, propagation velocity and the energy injected into the zones free of ice (also called air gaps). The simulated results provided by the model are in agreement with those obtained experimentally using a simplified ice-covered cylinder as well as a short string of five IEEE standard porcelain suspension units covered with artificial ice.     

Analytical overview of DNA interaction with Morin and its metal complexes

Flavonoids play an important role in pharmaceutical and biomedical sciences. Various flavonoids, especially Morin, have potential to interact with DNA. Their prospective clinical and pharmacological utilities have attracted researchers?? attention in last two decades. Due to their interaction with DNA and their anticancer effects, a lot of investigations have been carried out all over the world. In this paper, we will review the properties of Morin and its different metal complexes as well as their interactions with DNA that have been reported by several research groups. Also, further details have been provided about binding mechanisms of these materials with DNA using analytical techniques such as UV?CVisible and fluorescence spectroscopies, viscosity and voltammetry. Structural analysis showed Morin binds to DNA through non-intercalation mode, but its metal complexes interact with DNA via intercalation mode and binding mode of Morin, and its metal complexes with DNA will be helpful in the determination of anticancer drugs binding mechanism to DNA. Therefore, it will be useful in new drug designs.     

A quantitative approach to study solid state phase coarsening in solder alloys using combined phase-field modeling and experimental observation

In the present work, a quantitative phase-field approach is introduced to study the phase-coarsening phenomena in solder alloys, Pb-Sn alloy here. The most important part of this work is to introduce a simple and versatile approach to quantify the experimental and simulation data, without putting into difficulties corresponding to the stochastic nature of phenomenon, in order to compute unknown physical data required to perform numerical simulation. For this purpose, at first, the evolution of microstructure vs. time is studied experimentally by the conventional optical microscopy. Then, unknown physical data, the interface mobility here, is computed by fitting the time evolution of the total interface perimeter of the simulation results to that of the experimental data. In fact, by this approach, the physical data is computed such that it will be applied to predict reality in the subsequent simulations, i.e., the presented method can be accounted as the calibration of the corresponding mathematical model and numerical method. The validity of the presented approach is supported by comparing simulation data to experimental ones.