排序方式: 共有9条查询结果,搜索用时 15 毫秒
1
1.
For the defect that the mechanical properties of polypyrrole supercapacitors decrease with charge and discharge cycles, and
the cycle stability is poor, a compound method of polypyrrole electrode for supercapacitors based on multi-walled carbon nanotubes
is proposed. The structure of the formed polypyrrole coated multi-walled carbon nanotubes effectively increase the specific surface
area of the electrode material, the utilization rate of the active material and the electrical conductivity, improve the rapid charge and
discharge performance of the electrode material, and greatly improve cyclic stability of polypyrrole. The composite electrode materi-
al of polypyrrole and functionalized multi-walled carbon nanotubes for supercapacitors is prepared by pulse current deposition meth-
od. It is scanned at a scanning rate of 1000mV?s -1 in a 3mol?L -1 potassium chloride electrolyte, after 100,000-cycle, the capacity on-
ly declines by 16%. 相似文献
2.
3.
为获得微尺寸叠氮化铅驱动飞片的重要结构参数与飞片速度和能量的关系,进行微装药驱动飞片的仿真研究。根据叠氮化铅的爆速与密度关系,拟合出基于γ律方程的叠氮化铅Jones-Wilkins-Lee状态方程参数;利用有限元分析软件AUTODYN建立叠氮化铅驱动飞片的仿真模型,并使用光子多普勒测速系统测得飞片速度-位移关系曲线,仿真与试验曲线的一致性好。使用建立的仿真模型分析装药直径、装药高度、加速膛孔径、飞片厚度与飞片速度和能量的关系。结果表明:随着装药直径和高度的增加,飞片速度、能量增长速率减小,装药直径变化对飞片速度、能量的影响更显著;随着飞片厚度增大,飞片速度呈指数下降,飞片能量先增后减,存在着使飞片能量最大的飞片厚度;加速膛孔径小于装药直径时,飞片速度、能量略有下降;加速膛孔径大于装药直径时,飞片速度、能量急剧下降。 相似文献
4.
5.
6.
钝感Ni-Cr金属桥膜换能元的制备及性能 总被引:3,自引:2,他引:1
采用磁控溅射技术设计加工了一种满足钝感电火工品的Ni-Cr金属薄膜桥换能元,在起爆桥区中心涂抹三硝基间苯二酚铅,对其进行了安全电流、抗静电性能、断桥时间、作用时间的测试,并与半导体桥换能元、桥带式换能元进行了性能对比。结果表明,电阻为(1±0.1)Ω时,在相同散热条件下,该Ni-Cr金属薄膜换能元安全性较其他两种换能元裕度大,作用时间、断桥时间介于半导体桥和桥带式换能元之间,采用5 A发火,引爆三硝基间苯二酚铅的作用时间小于1 ms。 相似文献
7.
曾祥涛 《军民两用技术与产品》2017,(22)
水是常见的一种热能传导物,自身的纯度同工业生产关系密切.因此,有关部门呼吁要重视对工业水的处理.工业锅炉是电力工厂的一个主要设备,我国工业锅炉量多,但因为容量相对小,实际运行中效率较低,在具体工作当中,水的处理技术十分关键. 相似文献
8.
9.
1