Variation in content of tyramine,histamine, 2-phenylethylamine,tryptamine and their precursor amino acids in a Chardonnay wine by using different commercial active dry yeasts and nitrogen sources

Wine is a fermented beverage that could be affected by high concentrations of biogenic amines, thus altering organoleptic and health properties. In this work, the capacity of different selected yeast strains regarding to affect the content of tyramine, histamine, 2-phenylethylamine, tryptamine and their precursor amino acids (pAA) during fermentation has been described. Overall, biogenic amines (BAs) and pAA contents appeared significantly related both to the strain and to the nutrient supplementation applied. Among BAs, without and (with) nitrogen source addition, the concentrations covered a range between 0.1 and 9.5 (0.1–10.3) mg L⁻¹ for tyramine; 0.1 and 4.4 (0.1–4.6) mg L⁻¹ for histamine; 0.4 and 1.1 (0.4–1.4) mg L⁻¹ for 2-phenylethylamine; and 0.02 and 0.14 (0.01–0.12) mg L⁻¹ for tryptamine, respectively. Considering that also wine yeast species are responsible for BAs formation, the evidence from fermentation trials underlined the relevance of a careful choice of ADY strains and nitrogen sources in the management of alcoholic fermentation in wine.     

Choquet optimal set in biobjective combinatorial optimization

We study in this paper the generation of the Choquet optimal solutions of biobjective combinatorial optimization problems. Choquet optimal solutions are solutions that optimize a Choquet integral. The Choquet integral is used as an aggregation function, presenting different parameters, and allowing to take into account the interactions between the objectives. We develop a new property that characterizes the Choquet optimal solutions. From this property, a general method to easily generate these solutions in the case of two objectives is defined. We apply the method to two classical biobjective optimization combinatorial optimization problems: the biobjective knapsack problem and the biobjective minimum spanning tree problem. We show that Choquet optimal solutions that are not weighted sum optimal solutions represent only a small proportion of the Choquet optimal solutions and are located in a specific area of the objective space, but are much harder to compute than weighted sum optimal solutions.     

Patterns in melanocytic lesions: impact of the geometry on growth and transport inside the epidermis

In glabrous skin, nevi and melanomas exhibit pigmented stripes during clinical dermoscopic examination. They find their origin in the basal layer geometry which periodically exhibits ridges, alternatively large (limiting ridges) and thin (intermediate ridges). However, nevus and melanoma lesions differ by the localization of the pigmented stripes along furrows or ridges of the epidermis surface. Here, we propose a biomechanical model of avascular tumour growth which takes into account this specific geometry in the epidermis where both kinds of lesions first appear. Simulations show a periodic distribution of tumour cells inside the lesion, with a global contour stretched out along the ridges. In order to be as close as possible to clinical observations, we also consider the melanin transport by the keratinocytes. Our simulations show that reasonable assumptions on melanocytic cell repartition in the ridges favour the limiting ridges of the basal compared with the intermediate ones in agreement with nevus observations but not really with melanomas. It raises the question of cell aggregation and repartition of melanocytic cells in acral melanomas and requires further biological studies of these cells in situ.     

Beyond Intercalation‐Based Li‐Ion Batteries: The State of the Art and Challenges of Electrode Materials Reacting Through Conversion Reactions

Despite the imminent commercial introduction of Li‐ion batteries in electric drive vehicles and their proposed use as enablers of smart grids based on renewable energy technologies, an intensive quest for new electrode materials that bring about improvements in energy density, cycle life, cost, and safety is still underway. This Progress Report highlights the recent developments and the future prospects of the use of phases that react through conversion reactions as both positive and negative electrode materials in Li‐ion batteries. By moving beyond classical intercalation reactions, a variety of low cost compounds with gravimetric specific capacities that are two‐to‐five times larger than those attained with currently used materials, such as graphite and LiCoO₂, can be achieved. Nonetheless, several factors currently handicap the applicability of electrode materials entailing conversion reactions. These factors, together with the scientific breakthroughs that are necessary to fully assess the practicality of this concept, are reviewed in this report.     

The multiobjective multidimensional knapsack problem: a survey and a new approach

The knapsack problem (KP) and its multidimensional version (MKP) are basic problems in combinatorial optimization. In this paper, we consider their multiobjective extension (MOKP and MOMKP), for which the aim is to obtain or approximate the set of efficient solutions. In the first step, we classify and briefly describe the existing works that are essentially based on the use of metaheuristics. In the second step, we propose the adaptation of the two‐phase Pareto local search (2PPLS) to the resolution of the MOMKP. With this aim, we use a very large scale neighborhood in the second phase of the method, that is the PLS. We compare our results with state‐of‐the‐art results and show that the results we obtained were never reached before by heuristics for biobjective instances. Finally, we consider the extension to three‐objective instances.     

Two phase operation for a three phase PMSM using a control model based on a Concordia like transform associated to a classic Park transform

In aerospace applications, high reliability drives are required. For electrical drives based on three phase PMSM, a way to improve the reliability is to allow a degraded mode operation on two phases only, thanks to specifically developed power and control architectures.The aim of this paper is to present a control strategy for the two phase operation which is supported by a model based on a Concordia like transform associated to a classic Park transform. This approach maintains the advantages related to the torque control in the Park reference frame: the two active phases are still supplied with sinusoidal currents, whose amplitude is proportional to the torque. By adjusting the phase shifts between these currents and the corresponding electromotive forces (EMFs), the torque ripple can be minimized or even canceled according to the EMF shape.     

Thermal behaviour assessment of a novel vertical greenery module system: first results of a long-term monitoring campaign in an outdoor test cell

Vertical greenery modular systems (VGMSs) are an increasingly widespread building envelope solution aimed at improving the aesthetical quality of both new and existing façades, contemporarily achieving high energy efficiency performance. Within a research project, a new prototype of VGMS was developed, designed and tested. An experimental monitoring campaign was carried out on a test cell located in Turin (northern Italy), aimed at assessing both biometric parameters and energy-related issues. Two different types of growing media and two plant species, Lonicera nitida L. and Bergenia cordifolia L., have been tested on a south-facing lightweight wall. Results have been compared to the same wall without VGMS and plaster finished, in order to characterise the thermal insulation effectiveness in the winter period and the heat gain reduction in the summer period. Measured equivalent thermal transmittance values of the green modular system showed a 40 % reduction, when compared to the plastered wall, thus noticeably impacting on the energy crossing the façade during the heating season. Benefits of the VGMS are measured also during the summer season, when the presence of vegetation lowers the outdoor surface temperatures of the wall up to 23 °C compared to the plastered finishing, with a positive effect on outdoor comfort and urban heat island mitigation. Nevertheless, as far as the entering energies are concerned, not significant reduction was observed for VGMS, compared to the reference plastered wall, since the green coverage acts as a thermal buffer and solar radiation is stored and slowly released to the indoor environment.     

Natural Antifungal Peptides/Proteins as Model for Novel Food Preservatives

A large range of ingredients for food and food products are subject to fungal contamination, which is a major cause of destruction of crops, exposure of animals and humans to invasive mycotoxins, and food spoilage. The resistance of fungal species to common preservation methods highlights the necessity of new ways to increase the shelf life of raw material for food and food products. Antimicrobial peptides and proteins (AMPs) are essential members of the immune system of most living organisms. Due to their broad range of activity and their stability to commonly used food processes, they represent promising alternatives to traditional preservatives. However, despite the growing number of reports of potential food applications of these AMPs, the number of approved peptides is low. Poor solubility, toxicity, and a time‐consuming extraction are hurdles that limit their application in food products. Thanks to a deep understanding of the key determinants of their activity, the development of optimized synthetic peptides has reduced these drawbacks. This review presents natural and synthetic antifungal peptides/proteins (AFPs), effective against food‐related fungi, with particular emphasis on AFPs from plant sources. The design of novel antifungal peptides via key elements of antifungal activity is also reviewed. The potential applications of natural and synthetic AFPs as novel antifungal food preservatives are finally discussed.     

An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy

The influence of various conditions of Inconel 738 superalloy welding or deposition welding has been studied in order to shed light on the coupling between thermal, metallurgical and mechanical states in the heat affected zone (HAZ) in which cracking may occur particularly during welding and post-weld heat treatment. Predominant crack controlling factors have been highlighted thanks to different pre-weld and post-weld heat treatments, in addition to various welding rates and pre-heating prior to welding. These factors are mainly the material ductility related to the morphology and volume fraction of intermetallic precipitates and thermally induced residual stress. It has appeared that reducing thermally induced residual stress could be more effective for preventing cracking than controlling the material ductility in the related zones thanks to adjustment of pre-weld and post-weld heat treatments. With the objective of cracking remediation, welding on preheated parts leads to lower weld power, to reduce significantly thermal gradients, decreases thermally induced stress and impedes cracks formation despite some localized and temporary decrease in alloy ductility.     

Fungal dyes for textile applications: testing of industrial conditions for wool fabrics dyeing

Natural dyes and pigments have been proposed as an eco-friendly alternative to artificial pigments. Among the diverse organisms able to synthesize natural dyes and pigments, several wood inhabiting fungi produce extracellular compounds which have been tested to dye fabrics at laboratory conditions with good results. However, the dyeing conditions used at laboratory level not necessary meet the real conditions in which dyeing of fabrics is conducted at industrial level. In this work, yellow and red dyes producing fungi, Penicillium murcianum and Talaromyces australis, respectively, were isolated from wood samples and used to dye wool fabrics at conditions of temperature, pH, additives, and equipment similar to those used at industrial level. After dyeing treatments, color fastness to washing, wet and dry rubbing, and tensile strength were tested. Satisfactory results were found when the dyes were used individually and mixed to different proportions. According to the results, natural dyes synthesized by these two wood inhabiting fungi have great potential to be used for dyeing of wool at industrial level.