Firework inspired load balancing approach for wireless sensor networks

Wireless Networks - In Wireless Sensor Networks (WSNs), where power consumption is a huge concern, the improvement of the network’s lifetime is an area of constant study and innovation. The...     

A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

Evolution of properties of parts during MIM and sintering of recycled oxide particles

Metal injection moulding (MIM) is an established process for high volume production of complex shaped metallic parts using commercially available feedstocks. The characteristics of parts after moulding, debinding, and sintering cannot be simply predictable from raw materials because the properties get altered with the process parameters and the corresponding levels of porosity during processing steps. In this study, physical properties, microstructure, and mechanical properties of the MIM parts have been characterised to understand the evolution of strength during various steps in MIM processing. Feedstocks with different binder loading show a considerable difference in physical as well as mechanical characteristics. During sintering of parts which have solid loading of grinding sludge, simultaneous in situ reduction and densification takes place, whereas only densification occurs in carbonyl iron parts. It is, therefore, possible to make complex shaped parts of different levels of porosity from downgraded shop floor metallic waste.     

Performance comparison of space-time block coded and cyclic delay diversity MC-CDMA systems

Spatial diversity is a widely applied technique for enhancing wireless system performance since it greatly reduces the detrimental effects of multipath fading. Space-time block codes have been considered the best choice for transmit diversity in narrowband environments, but their use in broadband channels is questionable due to their inability to pick up multipath diversity. However, when used in conjunction with an MC-CDMA system, they achieve not only full spatial but also variable multipath diversity depending on the employed spreading. In comparison, cyclic delay diversity is an attractive approach to achieve spatial and multipath diversity. Its simplicity and conformability with current standards makes it desirable for multicarrier systems. Previous studies suggest that CDD is only advantageous with an outer channel code for OFDM systems. In this article, we compare STBCs and CDD applied to an MC-CDMA system in terms of complexity and performance. It is shown that for an MC-CDMA system, CDD benefits from spreading and channel coding that makes it very competitive with STBCs, particularly since it is applicable to any number of transmit antennas with no loss in rate.     

Circuit analysis of an ultrafast junction mixing scanning tunnelingmicroscope

A lumped element circuit model for the operation of a junction mixing scanning tunneling microscope (JM-STM) is presented. Fits from this model show excellent agreement with experimental results in the picosecond time regime. The tip sample capacitance employed in the model was calculated to be 33 fF, using the method of images. By varying the capacitance, various tip/sample geometries can be investigated. Testing the response of the model tunnel junction, for faster electrical pulses, suggests how the JM-STM can be pushed into the femtosecond time regime     

Healing substrates with mobile, particle-filled microcapsules: designing a 'repair and go' system.

We model the rolling motion of a fluid-driven, particle-filled microcapsule along a heterogeneous, adhesive substrate to determine how the release of the encapsulated nanoparticles can be harnessed to repair damage on the underlying surface. We integrate the lattice Boltzmann model for hydrodynamics and the lattice spring model for the micromechanics of elastic solids to capture the interactions between the elastic shell of the microcapsule and the surrounding fluids. A Brownian dynamics model is used to simulate the release of nanoparticles from the capsule and their diffusion into the surrounding solution. We focus on a substrate that contains a damaged region (e.g. a crack or eroded surface coating), which prevents the otherwise mobile capsule from rolling along the surface. We isolate conditions where nanoparticles released from the arrested capsule can repair the damage and thereby enable the capsules to again move along the substrate. Through these studies, we establish guidelines for designing particle-filled microcapsules that perform a 'repair and go' function and thus, can be utilized to repair damage in microchannels and microfluidic devices.     

An image multiresolution representation for lossless and lossycompression

We propose a new image multiresolution transform that is suited for both lossless (reversible) and lossy compression. The new transformation is similar to the subband decomposition, but can be computed with only integer addition and bit-shift operations. During its calculation, the number of bits required to represent the transformed image is kept small through careful scaling and truncations. Numerical results show that the entropy obtained with the new transform is smaller than that obtained with predictive coding of similar complexity. In addition, we propose entropy-coding methods that exploit the multiresolution structure, and can efficiently compress the transformed image for progressive transmission (up to exact recovery). The lossless compression ratios are among the best in the literature, and simultaneously the rate versus distortion performance is comparable to those of the most efficient lossy compression methods.     

Some Physical Properties of Pure and Doped Polyvinyl Alcohol under Applied Stress

Thick films of polyvinyl alcohol (PVA) containing very finemetallic powder, copper (Cu), iron (Fe) and aluminum (Al) 2.5% by weight,were prepared by the casting method. The temperature dependence of Young'smodulus at constant stress, the stress dependence of Young's modulus(Y), the stress dependence of dielectric constant (ε) and stressdependence of phonon velocity, were studied. It was found that Young'smodulus (Y) of the pure sample has the lowest value and that of PVA + Alhas the highest value. This can be explained on the basis that Ydepends on the ratio between the energy of molecular interactions andthe energy of thermal motion of the sample units. We also found that thedielectric constant increases with the addition of metallic powder, andwith an increasing applied stress. The phonon velocity increased withincreasing stress. The increase of stress decreases imperfectionsleading to the increased phonon velocity. The electronic absorptionspectra of PVA is not affected by doping Al and Fe, whereas the PVA dopedwith Cu shows a shift of the absorption maxima toward a longer wavelength.The instantaneous elastic behavior may be observed only at lowtemperatures and very short creep times.     

Synergistic decrease of clonal proliferation, induction of differentiation, and apoptosis of acute promyelocytic leukemia cells after combined treatment with novel 20-epi vitamin D3 analogs and 9-cis retinoic acid

Patients with acute promyelocytic leukemia (APL) usually relapse after all-trans retinoic acid (RA) treatment because this therapy fails to eradicate the malignant clone. Our data showed that KH 1060 and other 20-epi vitamin D3 analogs alone were potent inhibitors of clonal growth of NB4 cells, an APL cell line (ED50, approximately 5 x 10(-11) M). The combination of KH 1060 and 9-cis-RA synergistically and irreversibly enhanced this effect. Neither KH 1060 nor 9-cis-RA (10(-6) M, 3 d) were strong inducers of differentiation of NB4 cells. However, 98% of the cells underwent differentiation to a mature phenotype with features of both granulocytes and monocytes after exposure to a combination of both compounds. Apoptosis only increased after incubation of NB4 cells with 9-cis-RA alone (28%) or with a combination of 9-cis-RA plus KH1060 (32%). Immunohistochemistry showed that the bcl-2 protein decreased from nearly 100% of the wild-type NB4 cells to 2% after incubation with a combination of KH 1060 and 9-cis-RA, and the bax protein increased from 50% of wild-type NB4 cells to 92% after culture with both analogs (5 x 10(-7) M, 3 d). Western blot analysis paralleled these results. Studies of APL cells from one untreated individual paralleled our results with NB4 cells. Taken together, the data demonstrated that nearly all of the NB4 cells can be irreversibly induced to differentiate terminally when exposed to the combination of KH 1060 and 9-cis-RA.