Electrowetting-Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Electric nanogenerators that directly convert the energy of moving drops into electrical signals require hydrophobic substrates with a high density of static electric charge that is stable in “harsh environments” created by continued exposure to potentially saline water. The recently proposed charge-trapping electric generators (CTEGs) that rely on stacked inorganic oxide–fluoropolymer (FP) composite electrets charged by homogeneous electrowetting-assisted charge injection (h-EWCI) seem to solve both problems, yet the reasons for this success have remained elusive. Here, systematic measurements at variable oxide and FP thickness, charging voltage, and charging time and thermal annealing up to 230 °C are reported, leading to a consistent model of the charging process. It is found to be controlled by an energy barrier at the water-FP interface, followed by trapping at the FP-oxide interface. Protection by the FP layer prevents charge densities up to −1.7 mC m⁻² from degrading and the dielectric strength of SiO₂ enables charge decay times up to 48 h at 230 °C, suggesting lifetimes against thermally activated discharging of thousands of years at room temperature. Combining high dielectric strength oxides and weaker FP top coatings with electrically controlled charging provides a new paradigm for developing ultrastable electrets for applications in energy harvesting and beyond.     

Fast and accurate 4‐node quadrilateral

An accurate and variationally consistent 4‐node quadrilateral element is introduced where high coarse mesh accuracy and low mesh distortion sensitivity are characteristic qualities, even when incompressibility is approached for plane strain. One‐point quadrature integration procedure is adopted and a new improved stabilization technique is developed. Orthogonality conditions are utilized so that the patch test is satisfied for arbitrary quadrilaterals. Several numerical examples including a convergence rate study are presented which confirm the excellent performance of this element. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulating Ramsey-Type Fringes in a Pulsed Microwave-Driven Classical Josephson Junction

We present evidence for a close analogy between the nonlinear behaviour of a pulsed microwave-driven Josephson junction at low temperature and the experimentally observed behaviour of Josephson systems operated below the quantum transition temperature under similar conditions. We specifically address observations of Ramsey-type fringe oscillations, which can be understood in classical nonlinear dynamics as results of slow transient oscillations in a pulsed microwave environment. Simulations are conducted to mimic experimental measurements by recording the statistics of microwave-induced escape events from the anharmonic potential well of a zero-voltage state. Observations consistent with experimentally obtained Ramsey-type oscillations are found in the classical model. An erratum to this article can be found at     

Micromechanics and acoustic emission analysis of the failure process of thermoplastic composites

The finite element method (FEM) and acoustic emission technique (AE) were applied to the micromechanics analysis of the failure process of composites with thermoplastic matrix materials. FEM calculations to local stress-strain distribution and the influence of very different intermediate layer properties are interpreted with regard to microscopic failure mechanisms in composite materials. The strongly differing AE behaviour of both chalk-filled Polyvinylchloride and high density polyethylene and short-glass-fibre reinforced polypropylene, polyamide, PBTP, SAN and ABS in tensile test experiments is demonstrated. Representative loading limits are derived from the nature and extent of the dominating failure mechanisms by comparison of theoretical and experimental results. The influence of critical strain, shear strength and fracture toughness properties of the modified matrix as well as the composite morphology and phase adhesion on significant deformation and failure stages is discussed. Finally some conclusions are drawn about a possible critical long-term strain of composites.     

Biomimetic Polymer Nanostructures by Injection Molding

The nanometer scale topography of self‐assembling structural protein complexes in animals is believed to induce favorable cell responses. An important example of such nanostructured biological complexes is fibrillar collagen that possesses a cross‐striation structure with a periodicity of 69 nm and a peak‐to‐valley distance of 4–6 nm. Bovine collagen type I was assembled into fibrillar structures in vitro and sedimented onto solid supports. Their structural motif was transferred into a nickel replica by physical vapor deposition of a small‐grained metal layer followed by galvanic plating. The resulting inverted nickel structure was found to faithfully present most of the micrometer and nanometer scale topography of the biological original. This nickel replica was used as a die for the injection molding of a range of different thermoplastic polymers. Total injection molding cycle times were in the range of 30–45 seconds. One of the polymer materials investigated, polyethylene, displayed poor replication of the biological nanotopographical motif. However, the majority of the polymers showed very high replication fidelity as witnessed by their ability to replicate the cross‐striation features of less than 5 nm height difference. The latter group of materials includes poly(propylene), poly(methyl methacrylate), poly(L ‐lactic acid), polycaprolactone, and a copolymer of cyclic and linear olefins (COC). This work suggests that the current limiting factor for the injection molding of nanometer scale topography in thermoplastic polymers lies with the grain size of the initial metal coating of the mold rather than the polymers themselves.

     

What you get is what you see: revisiting the evaluator effect in usability tests

Usability evaluation is essential to user-centred design; yet, evaluators who analyse the same usability test sessions have been found to identify substantially different sets of usability problems. We revisit this evaluator effect by having 19 experienced usability professionals analyse video-recorded test sessions with five users. Nine participants analysed moderated sessions; 10 participants analysed unmoderated sessions. For the moderated sessions, participants reported an average of 33% of the problems reported by all nine of these participants and 50% of the subset of problems reported as critical or serious by at least one participant. For the unmoderated sessions, the percentages were 32% and 40%. Thus, the evaluator effect was similar for moderated and unmoderated sessions, and it was substantial for the full set of problems and still present for the most severe problems. In addition, participants disagreed in their severity ratings. As much as 24% (moderated) and 30% (unmoderated) of the problems reported by multiple participants were rated as critical by one participant and minor by another. The majority of the participants perceived an evaluator effect when merging their individual findings into group evaluations. We discuss reasons for the evaluator effect and recommend ways of managing it.