Competitive effects of free volume,rigidity, and self-adaptivity on indentation response of silicoaluminoborate glasses

Lithium aluminoborate glasses have recently been found to feature high resistance to crack initiation during indentation, but suffer from relatively low hardness and chemical durability. To further understand the mechanical properties of this glass family and their correlation with the network structure, we here study the effect of adding SiO₂ to a 25Li₂O–20Al₂O₃–55B₂O₃ glass on the structure and mechanical properties. Addition of silica increases the average network rigidity, but meanwhile its open tetrahedral structure decreases the atomic packing density. Consequently, we only observe a minor increase in hardness and glass transition temperature, and a decrease in Poisson's ratio. The addition of SiO₂, and thus removal of Al₂O₃ and/or B₂O₃, also makes the network less structurally adaptive to applied stress, since Al and B easily increase their coordination number under pressure, while this is not the case for Si under modest pressures. As such, although the silica-containing networks have more free volume, they cannot densify more during indentation, which in turn leads to an overall decrease in crack resistance upon SiO₂ addition. Our work shows that, although pure silica glass has very high glass transition temperature and relatively high hardness, its addition in oxide glasses does not necessarily lead to significant increase in these properties due to the complex structural interactions in mixed network former glasses and the competitive effects of free volume and network rigidity.     

Impact of varying area of polluting surface materials on perceived air quality

A laboratory study was performed to investigate the impact of the concentration of pollutants in the air on emissions from building materials. Building materials were placed in ventilated test chambers. The experimental set-up allowed the concentration of pollution in the exhaust air to be changed either by diluting exhaust air with clean air (changing the dilution factor) or by varying the area of the material inside the chamber when keeping the ventilation rate constant (changing the area factor). Four different building materials and three combinations of two or three building materials were studied in ventilated small-scale test chambers. Each individual material and three of their combinations were examined at four different dilution factors and four different area factors. An untrained panel of 23 subjects assessed the air quality from the chambers. The results show that a certain increase in dilution improves the perceived air quality more than a similar decrease in area. The reason for this may be that the emission rate of odorous pollutants increases when the concentration in the chamber decreases. The results demonstrate that, in some cases the effect of increased ventilation on the air quality may be less than expected from a simple dilution model.     

The impact of information on perceived air quality--'organic' vs. 'synthetic' building materials

As indoor air quality complaints cannot be explained satisfactorily and building materials can be a major source of indoor air pollution, we hypothesized that emissions from building materials perceived as unfamiliar or annoying odors may contribute to such complaints. To test this hypothesis, emissions from indoor building materials containing linseed oil (organic) and comparable synthetic (synthetic) materials were evaluated by a na?ve sensory panel for evaluation of odor intensity (OI) and odor acceptability (OA). The building materials were concealed in ventilated climate chambers of the CLIMPAQ type. When information was provided about the identity and type of building material during the evaluation, i.e. by labeling the materials in test chambers either as 'organic' or 'synthetic', the OI was significantly lower for all the 'organic' materials compared with evaluations without information. Similarly, OA was increased significantly for most 'organic' samples, but not the 'synthetic' ones. The major effect is probably that OA is increased when the panel is given information about the odor source. PRACTICAL IMPLICATIONS: As providing information about the source of odors can increase their acceptability, complaints about indoor air quality may be decreased if occupants of buildings are well informed about odorous emissions from the new building materials or new activities in their indoor environment.     

Gravity drainage of activated sludge: new experimental method and considerations of settling velocity, specific cake resistance and cake compressibility

A laboratory scale setup was used for characterization of gravitational drainage of waste activated sludge. The aim of the study was to assess how time of drainage and cake dry matter depended on volumetric load, SS content and sludge floc properties. It was demonstrated that activated sludge forms compressible cakes, even at the low pressures found in gravitational drainage. The values of specific cake resistance were two to three orders of magnitude lower than those obtained in pressure filtration. Despite the compressible nature of sludge, key macroscopic parameters such as time of drainage and cake solid content showed simple functional dependency of the volumetric load and SS of a given sludge. This suggests that the proposed method may be applied for design purposes without the use of extensive numerical modeling. The possibilities for application of this new technique are, among others, the estimation of sludge drainability prior to mechanical dewatering on a belt filter, or the application of surplus sludge on reed beds, as well as adjustments of sludge loading, concentration or sludge pre-treatment in order to optimize the drainage process.     

Runoff of particle bound pollutants from urban impervious surfaces studied by analysis of sediments from stormwater traps

Runoff sediments from 68 small stormwater traps around the harbor of urban Bergen, Norway, were sampled and the concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), heavy metals, and total organic carbon (TOC) were determined in addition to grain size. Our study provides empirical data from a large area in the interface between the urban and marine environment, studying the active transport of pollutants from land-based sources. The results of the analyses clearly demonstrate the importance of the urban environment representing a variety of contamination sources, and that stormwater runoff is an important dispersion mechanism of toxic pollutants. The concentrations of different pollutants in urban runoff sediments show that there are several active pollution sources supplying the sewage systems with PCBs, PAHs and heavy metals such as lead (Pb), zinc (Zn) and cadmium (Cd). The concentration of PCB7 in the urban runoff sediments ranged between < 0.0004 and 0.704 mg/kg. For PAH16, the concentration range was < 0.2-80 mg/kg, whereas the concentration ranges of Pb, Zn and Cd were 9-675, 51.3-4670 and 0.02-11.1 mg/kg respectively. Grain size distribution in 21 selected samples varied from a median particle diameter of 13 to 646 microm. However, several samples had very fine-grained particles even up to the 90 percentile of the samples, making them available for stormwater dispersion in suspended form. The sampling approach proposed in this paper will provide environmental authorities with a useful tool to examine ongoing urban contamination of harbors and similar recipients.     

Long-term trends in the uptake of radiocesium in Rozites caperatus

Measurements of (134)Cs and (137)Cs in Rozites caperatus from 1991 to 2001 showed differences in the uptake pattern of Chernobyl and fallout derived radiocesium over time. The effective half-life of Chernobyl derived (137)Cs was determined to 12.4 years, whereas fallout derived (137)Cs had an effective half-life of 9.8 years. However, the trend for Chernobyl derived (137)Cs was clearly not linear. An effective average half-life of 3.1 years was determined for Chernobyl derived (137)Cs in the period from 1991 to 1994. The corresponding ecological half-life was 3.4 years. In the period from 1994 to 2001 it is possible that the effective half-life was longer than the physical, which indicates that more Chernobyl cesium becomes available than disappears through radioactive decay. The difference may be due to depth distribution of radiocesium, i.e. fallout derived cesium have penetrated deeper than Chernobyl. The changes in the half-lives of Chernobyl derived radiocesium over time together with the half-life of the older fallout derived radiocesium may be valuable in predictions of future radiocesium concentrations in mushrooms and thereby of food chain transfer to man.     

International influences and professional rivalry in early Danish planning

Influences on early Danish planning came from a variety of international sources. The Big City paradigm was mainly taken over from German planning, sometimes varied with elements from Haussmann and American cities. Later inspiration from Camillo Sitte and from the English Garden City movement was combined with traditional Danish small town values into a competing paradigm. The engineers mainly adhered to the Big City paradigm, whilst the architects were the chief proponents of the English inspiration, and these two paradigms have been used as tools of rivalry between the two professions. This discord might in the long run have led to a weakening of the planners’ political influence.     

Indentation deformation and cracking behavior of hydrated aluminoborate glasses

Aluminoborate glasses have recently been found to feature high resistance to crack initiation during indentation due to a highly flexible network structure. In cesium aluminoborate glasses, it has been found that the use of a simple post-treatment, namely aging in a humid atmosphere, can further improve this resistance. To better understand the mechanical properties of this glass family upon humid aging, we here study the effect of aging conditions on the structure and mechanical properties of Li,K,Cs-aluminoborate glasses. As expected, we find that higher humidity and longer aging time cause more pronounced permeation of atmospheric water into the glasses. Due to their denser structure and stronger modifier-oxygen bonds, the humid aging has a relatively smaller effect on the mechanical properties of Li- and K-containing glasses relative to Cs-containing glasses, with the latter achieving an ultrahigh crack resistance. We find that the humid aging leads to the formation of a hydration layer in the Cs-aluminoborate glass surface, with a thickness of around 26 μm upon aging at 23 °C with 40% relative humidity for 7 days. Moreover, a remarkable indentation behavior, that is, the observation of μm-sized shear bands inside the imprint of the Cs-glass upon aging at 60% relative humidity is reported. Taken as a whole, the work provides guidelines for how to control the humid aging rate as a function of relative humidity and temperature to form a hydration layer and thus achieve improved crack resistance in such glasses.     

An integrated qualitative and quantitative modeling framework for computer‐assisted HAZOP studies

The article proposes a novel practical framework for computer‐assisted hazard and operability (HAZOP) that integrates qualitative reasoning about system function with quantitative dynamic simulation in order to facilitate detailed specific HAZOP analysis. The practical framework is demonstrated and validated on a case study concerning a three‐phase separation process. The multilevel flow modeling (MFM) methodology is used to represent the plant goals and functions. First, means‐end analysis is used to identify and formulate the intention of the process design in terms of components, functions, objectives, and goals on different abstraction levels. Based on this abstraction, qualitative functional models are constructed for the process. Next MFM‐specified causal rules are extended with systems specific features to enable proper reasoning. Finally, systematic HAZOP analysis is performed to identify safety critical operations, its causes and consequences. The outcome is a qualitative hazard analysis of selected process deviations from normal operations and their consequences as input to a traditional HAZOP table. The list of unacceptable high risk deviations identified by the qualitative HAZOP analysis is used as input for rigorous analysis and evaluation by the quantitative analysis part of the framework. To this end, dynamic first‐principles modeling is used to simulate the system behavior and thereby complement the results of the qualitative analysis part. The practical framework for computer‐assisted HAZOP studies introduced in this article allows the HAZOP team to devote more attention to high consequence hazards. © 2014 American Institute of Chemical Engineers AIChE J 60: 4150–4173, 2014