State-of-the-art technology: Recent investigations on laser-mediated synthesis of nanocomposites for environmental remediation

In both developing and industrialized/developed countries, various hazardous/toxic environmental pollutants are entering water bodies from organic and inorganic compounds (heavy metals and specifically dyes). The global population is growing whereas the accessibility of clean, potable and safe drinking water is decreasing, leading to world deterioration in human health and limitation of agricultural and/or economic development. Treatment of water/wastewater (mainly industrial water) via catalytic reduction/degradation of environmental pollutants is extremely critical and is a major concern/issue for public health. Light and/or laser ablation induced photocatalytic processes have attracted much attention during recent years for water treatment due to their good (photo)catalytic efficiencies in the reduction/degradation of organic/inorganic pollutants. Pulsed laser ablation (PLA) is a rather novel catalyst fabrication approach for the generation of nanostructures with special morphologies (nanoparticles (NPs), nanocrystals, nanocomposites, nanowires, etc.) and different compositions (metals, alloys, oxides, core-shell, etc.). Laser ablation in liquid (LAL) is generally considered a quickly growing approach for the synthesis and modification of nanomaterials for practical applications in diverse fields. LAL-synthesized nanomaterials have been identified as attractive nanocatalysts or valuable photocatalysts in (photo)catalytic reduction/degradation reactions. In this review, the laser ablation/irradiation strategies based on LAL are systematically described and the applications of LAL synthesized metal/metal oxide nanocatalysts with highly controlled nanostructures in the degradation/reduction of organic/inorganic water pollutants are highlighted along with their degradation/reduction mechanisms.     

Optimization of Steam Reforming of Methane in a Hydrogen-Filtering Membrane Module with a Nickel Catalyst and a Palladium-Alloy Foil

Theoretical Foundations of Chemical Engineering - A model is proposed for steam reforming of methane in a catalytic reactor, the working section of which includes two cylindrical chambers separated...     

Texture features’ based classification of MR images of normal and herniated intervertebral discs

Multimedia Tools and Applications - Disc herniation is considered as a very common spine abnormality resulting in severe pain in back and legs. Besides it has great impact on economy of suffering...     

3D and simplified pseudo-2D modeling of single cell of a high temperature solid oxide fuel cell to be used for online control strategies

In the current study, a single cell of a planar SOFC is firstly modeled in 3D using commercial SOFC module of ANSYS Fluent and the results are validated against the experimental investigations in the literature. Many researchers have used ANSYS Fluent for simulating solid oxide fuel cells. However, there is a huge gap in the literature on explaining the detailed procedure that should be followed in order to use this software effectively. A thorough step-by-step approach is presented to provide a deep insight into the software. Thereafter, a simplified quasi-2D method with infinitely shorter computational time is developed and the results are compared with the 3D model. It is found that the reduced model is capable of being utilized as an alternate method for both online diagnosis and designing active control strategies.     

Touch sensor and photovoltaic characteristics of CuSbS2 thin films

Spin-coated chalcostibite CuSbS₂ thin films (≈500 nm thick) were fabricated and the influence of the drying temperature on the structural, morphological, optical and thermoelectric properties of the films was investigated. Crystalline phase-pure chalcostibite has been obtained for the films dried at 180 °C and 210 °C, while below 180 °C these films are partially amorphous. Surprisingly, at drying temperature of 240 °C, a Cu_xS secondary phase appeared. The increase of the drying temperature leads to the increase of the particle size and the decrease of the optical band gap, which is interesting for optoelectronic applications. The highest power factor value was achieved for the film dried at 210 °C, due to the inexistence of secondary phases, which allowed realizing a stable thermoelectric touch sensor with a V_signal/_noise of 5. In addition, this film was tested as a photovoltaic (PV) device and a power conversion efficiency (PCE) of 0.030% with an open-circuit voltage (V_OC) of 0.36 V, a short-circuit current density (J_SC) of 0.278 mAcm^?2 and a fill factor (FF) of 0.27 were obtained. Therefore, this work evidences a pathway toward developing bi-functional devices with simultaneously thermoelectric touch sensor and photovoltaic functions.     

Acoustic damping flexible polyurethane foams: Effect of isocyanate index and water content on the soundproofing

High-efficiency sound absorbing flexible polyurethane foams (FPUFs) are manufactured using nonpolar polyester resin, methylene diphenyl diisocyanate, and other reagents by one-shot bulk polymerization. In this study, the impact of the isocyanate index (90, 100, and 110) and water content (2.5 and 5%) on the microphase separation and soundproofing behavior of FPUFs are examined using atomic force microscopy, Fourier transform infrared spectroscopy, optical microscope, and an impedance tube device. The results reveal that the increase of the isocyanate index and water content leads to the increase of the cell size, cell size distribution, open-cell content, cell wall roughness, and microphase separation. Also, maximum sound absorption coefficient (α) reaches to 0.98 and the average of α in the frequency range of 1500–4000 Hz increases from 0.7 to 0.87 by increasing the water content from 2.5 to 5% and isocyanate index from 90 to 110; therefore, acoustic damping performance enhances up to 26.24% due to the synergic effects of microphase separation on the viscose media formation, open-cell content, cell wall roughness, cell size, and cell size distribution. In conclusion, FPUFs with an optimal amount of microphase separation and drainage flow can be a promising candidate for sound insulating materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47363.     

Structural Regeneration of Coatings in Friction

Materials Science - We propose a mechanism for increasing the durability of friction surfaces in the presence of in-service defects caused by the intrastructural regeneration. It is shown that, in...     

Blockchain for Collaborative Businesses

Mobile Networks and Applications - Blockchain applications have continuously improved ever since its first debut on cryptocurrency. From then on, its uses have branched out from the financial...