Cellulose nanoparticles synthesised from potato peel for the development of active packaging film for enhancement of shelf life of raw prawns (Penaeus monodon) during frozen storage

In this study, the cellulose nanoparticles (CNP) isolated from potato peel were used for reinforcement of polyvinyl alcohol (PVA)-based active packaging film. The above film was used to pack the raw prawns (Penaeus monodon) at −20 °C, and the colour change, protein content, TVB-N, TMA and microbial analysis were done at regular interval for prawns stored in CNP-PVA active packaging film. A significant difference was observed in the quality of prawns stored in potato CNP-PVA film compared with prawns packed and stored in polyethylene film. The newly designed active packaging with CNP and fennel seed oil enhanced the shelf life of prawns up to two months for both HOSO (head on shell on) prawn and PD (peeled and deveined) prawn. Hence, the study recommends the potato peel CNP-PVA film with fennel seed oil as better choice to extend the shelf life of the prawns during storage compared with polyethylene packaging.     

Macrophage Immunomodulation Through New Polymers that Recapitulate Functional Effects of Itaconate as a Power House of Innate Immunity

Itaconate (ITA) is an emerging powerhouse of innate immunity with therapeutic potential that is limited in its ability to be administered in a soluble form. A library of polyester materials that incorporate ITA into polymer backbones resulting in materials with inherent immunoregulatory behavior is developed. Harnessing hydrolytic degradation release from polyester backbones, ITA polymers result in the mechanism specific immunoregulatory properties on macrophage polarization in vitro. In a functional assay, the polymer-released ITA inhibits bacterial growth on acetate. Translation to an in vivo model of biomaterial associated inflammation, intraperitoneal injection of ITA polymers demonstrate a rapid resolution of inflammation in comparison to a control polymer silicone, demonstrating the value of sustained biomimetic presentation of ITA.     

Novel Short-chain Crosslinked Cationomeric Polyurethanes

Summary Novel PUs containing pyridinium moieties were synthesized by chain extending isocyanate endcapped prepolymers with N, N’-bis (2-hydroxyethyl) isonicotinamide. The pyridinium moieties in the PUs were chemically crosslinked using short-chain divalent quaternising agents. The polyurethane cationomers were characterized by spectral, thermal and mechanical analysis. Spectral results confirmed the quaternisation of tertiary nitrogen leading to crosslinking. Compared to conventional PUs, the crosslinked PU networks exhibited improved thermal stability. The damping value (i.e.) tan δ for cationomers were improved over a broad temperature range when compared to conventional PU.     

Thermal degradation of poly(dimethylsilylene) and poly(tetramethyldisilylene‐co‐styrene)

Thermal degradation of poly(dimethylsilylene) homopolymer (PDMS) and poly(tetramethyldisilylene‐co‐styrene) copolymer (PTMDSS) was investigated by pyrolysis‐gas chromatography and thermogravimetry (TG). PDMS decomposes by depolymerization, producing linear and cyclic oligomeric products, whereas PTMDSS decomposes by random degradation along the chain resulting in each monomeric product and various other combination products. The homopolymer was found to be much less stable than the copolymer. The decomposition mechanisms leading to the formation of various products are shown. The kinetic parameters of thermal degradation were evaluated by different integral methods using TG data. The activation energies of decomposition (E) for the homopolymer and the copolymer are found to be 122 and 181 kJ/mol, respectively, and the corresponding values of order of reaction are 1 and 1.5. The observed difference in the thermal stability and the values of the kinetic parameters for decomposition of these polymers are explained in relation with the mechanism of decomposition. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Solution structure of the donor site of a trans-splicing RNA

The CYP51 gene encoding eburicol 14 alpha-demethylase (P450(14DM)) was cloned from a genomic library of the filamentous fungal plant pathogen Penicillium italicum, by heterologous hybridisation with the corresponding gene encoding lanosterol 14 alpha-demethylase from the yeast Candida tropicalis. The nucleotide sequence of a 1739-bp genomic fragment and the corresponding cDNA clone comprises an open reading frame (ORF) of 1545 bp, encoding a protein of 515 amino acids with a predicted molecular mass of 57.3 kDa. The ORF is interrupted by three introns of 60, 72 and 62 bp. The C-terminal part of the protein includes a characteristic haem-binding domain, HR2, common to all P450 genes. The deduced P. italicum P450(14DM) protein and the P450(14DM) proteins from Candida albicans, C. tropicalis and Saccharomyces cerevisiae share 47.2, 47.0 and 45.8% amino acid sequence identity. Therefore, the cloned gene is classified as a member of the CYP51 family. Multiple copies of a genomic DNA fragment of Pl italicum containing the cloned P450 gene were introduced into Aspergillus niger by transformation. Transformants were significantly less sensitive to fungicides which inhibit P450(14DM) activity, indicating that the cloned gene encodes a functional eburicol 14 alpha-demethylase.     

Photoacoustic Thermal Characterization of Porous Rare-Earth Phosphate Ceramics

The laser induced non-destructive photoacoustic technique has been employed to measure the thermal diffusivity of lanthanum phosphate ceramics prepared by the sol–gel route. The thermal diffusivity value was evaluated by knowing the transition frequency between the thermally thin to thermally thick region from the log–log plot of photoacoustic amplitude versus chopping frequency. Analysis of the data was carried out on the basis of the one-dimensional model of Rosencwaig and Gersho. The present investigation reveals that the sintering temperature has great influence on the propagation of heat carriers and hence on the thermal diffusivity value. The results were interpreted in terms of variations in porosity with sintering temperature as well as with changes in grain size.     

Creep deformation of induction pressure welded 2·25Cr-1Mo steel

In this paper, experimental results involving the effect of stress and temperature on creep behaviour of induction pressure welded (IPW) 2·25Cr-1Mo steel are presented. Creep rupture tests were conducted at 550–700°C in steps of 50°C over a stress range of 112·5–180 MPa. Above 650°C failure of the specimen was enhanced due to the microstructural instability. Failure in the specimens occurred invariably in the heat affected zones (HAZ), and the fracture surfaces indicated ductile failure.     

Role of heat transfer and thermal conductivity in the crystallization behavior of polypropylene‐containing additives: A phenomenological model

The thermal conductivity of a filler and the thermal conductivity of a composite made from that filler influence the heat‐transfer process during melt processing. The heat‐transfer process from the melt to the mold wall becomes an important factor in developing the skin–core morphology. These aspects were examined in this study. The thermal conductivity of polypropylene–filler composites was estimated with a standard model for various fillers such as calcium carbonate, talc, silica, wollastonite, mica, and carbon fibers. The rate of cooling under given conditions, including the melting temperature, mold wall temperature, mass of the composite, and filler content, was estimated with standard heat‐transfer equations. The time to attain the crystallization temperature for polypropylene was evaluated with a regression method with differential temperature steps. The crystallization curves were experimentally determined for the different fillers, and from them, the induction period for the onset of crystallization was estimated. These observations were correlated with the expected trends from the aforementioned formalism. The excellent fit of the curves showed that in all these cases, the thermal conductivity of the filler and composite played a dominant role in controlling the onset of the crystallization process. However, the nucleation effects became important in the later stages after the crystallization temperature was attained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2994–2999, 2003     

Saponification kinetic study of mica-acrylonitrile graft copolymers

Kinetics of alkaline hydrolysis of mica-acrylonitrile graft copolymers was studied. The dependence of alkali concentration and the time of hydrolysis on the degree of saponification was determined. Chemical and spectroscopical techniques were used to determine the mechanism of hydrolysis.