Synthesis,characterization and adsorption studies of h-BN crystal for efficient removal of Cd2+ from aqueous solution

In the present study, hexagonal boron nitride (h-BN) was synthesized from boric acid and melamine by thermal annealing method in a nitrogen atmosphere. The pure h-BN was used as an efficient sorbent for the uptake of Cd²⁺ ions from the solution phase. The kinetics and sorption studies of metal ions onto the h-BN were carried out in batch adsorption experiments at different temperature, time, pH, sorbent dosage, and concentration of metal ions. The optimum pH for the removal of the Cd²⁺ ions was found to be pH 7. The effect of temperature showed that the process of Cd²⁺ sorption remained endothermic in the range of 298 K–328 K. The Lagergren's first and Ho's second kinetic models were tested to interpret the adsorption kinetic data, however the present data was explained well by Ho's model for kinetics. The thermodynamic perameters ΔG, ΔS and ΔH were determined using the available adsorption data at different temperatures. The physicochemical properties of the synthesized product were also characterized before and after adsorption by different analytical techniques like FT-IR, TGA, XRD and Point of Zero Charge (PZC). The morphology of the surface was analyzed with the help of Scanning Electron Microscopy. The h-BN proved to be an efficient adsorbent for the uptake of the Cd²⁺ ions from aqueous media.     

Troubleshooting of Handover Problems in 900 MHz for Speech Quality

Although Long-term Evolution (LTE) technology has currently being used in data and voice transmission, reserved frequency bands for GSM is still in use due to its strengthen against multipath fading and it provides wider coverage area. Poor coverage problems caused by low signal level directly reduce network performance and cause undesirable cases for voice transmission. The aim of this study is first to solve handover (HO) problems due to the low signal quality and bad speech quality by hardware configuration and changing optimization parameters in detail as a novelty. The second is to examine the KPI values of the test region where HO problems have been solved and to determine whether the network contributed to the network quality. Offered method has made the network having following improvements; the value of RxQual drops from 0.61 to 0.57, number of failure in random access channel (RACH) drops down from 12 to 2, the number of failure in SDCCH drops down from 6 to 2, the total number of blocked calls from 18 to 4, and the number of dropped calls drops down to 2 from 5. Another criterion of the network quality the average for both uplink and downlink mean opinion score (MOS) value of region increased from 3.51 to 3.86. Also CSSR has been increased from 94.43 to 97.82% and HO success rate has been reached from 93.56 to 99.13%.

     

Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy

ABSTRACT

A combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process.     

Molecular weight influence on shape memory effect of shape memory polymer blend (poly(caprolactone)/styrene-butadiene-styrene)

The shape memory effect (SME) does not only concern the macroscopic structure. It concerns also the polymer structure at morphological, macromolecular, and molecular scales. This effect may depend on different physicochemical properties like morphology heterogeneity, chain rigidity, steric hindrance, chain polarity, free volume, cross-linking or entanglement density, molecular shape and weight, and so on. Hence, finding the relationship between the SME and these properties is very important. This can help to obtain the knowledge about the phenomenon origin and mechanism. One of the basic polymer properties, which can have direct SME, may be the molecular weight (M_w ). The question here is: If the M_w of a shape memory polymer (SMP) changes, for different reasons like degradation, what will be the effect of this change on its SME. In order to answer to this question, the investigation is focused on an SMP blend of 40% poly(ɛ-caprolactone) (PCL) and 60% styrene-butadiene-styrene (SBS). Then, enzymatic hydrolysis is performed on this blend to change its M_w . It is shown that this change is only related to the variation in the M_w of PCL. After that, different samples with a distinct average M_w are prepared and characterized by various experimental methods. Shape memory tests are performed on these blends, and the recovery rate (R_r ) for each of them is determined. It is found that when M_w of PCL decreases, its degree of crystallinity, its glass transition, and its melting temperatures, corresponding to the PCL phase, increase. However, the elongation at break of the blend declines with the reduction in M_w . The tests show that the alteration in the blend's M_w influences its SME. Indeed, R_r of the (PCL/SBS) mixture drops with the decrease in M_w of PCL.     

Assessing and building municipal open data capability

Information Systems and e-Business Management - In the past decade, cities around the world have published their open data as a new service. Some have used this service innovatively, as a vehicle...     

Factors that determine residents’ acceptance of smart city technologies

ABSTRACT

While some cities attempt to determine their residents’ demand for smart-city technologies, others simply move forward with smart-related strategies and projects. This study is among the first to empirically determine which factors most affect residents’ and public servants’ intention to use smart-city services. A Smart Cities Stakeholders Adoption Model (SSA), based on Unified Theory of Acceptance and Use of Technology (UTAUT2), is developed and tested on a mid-size U.S. city as a case study. A questionnaire was administered in order to determine the influence of seven factors – effort expectancy, self-efficacy, perceived privacy, perceived security, trust in technology, price value and trust in government – on behaviour intention, specifically the decision to adopt smart-city technologies. Results show that each of these factors significantly influenced citizen intention to use smart-city services. They also reveal perceived security and perceived privacy to be strong determinants of trust in technology, and price value a determinant of trust in government. In turn, both types of trust are shown to increase user intention to both adopt and use smart-city services. These findings offer city officials an approach to gauging residential intention to use smart-city services, as well as identify those factors critical to developing a successful smart-city strategy.     

Protective properties of PPy‐Au nanocomposite coatings prepared by sonoelectrochemisty and optimized by the Taguchi method

The polypyrrole (PPy) and polypyrrole‐Au (PPy‐Au) nanocomposite films have been sonoelectrochemically synthesized on St‐12 steel electrodes using the galvanostatic technique. Experimental design according to the Taguchi method has been applied to optimize the factors on the synthesis of PPy‐Au nanocomposite coating. Three factors were used to design an orthogonal array L9: Synthesis time (t), Current density (I), and Concentration of HAuCl₄ (C). The synthesized Au nanoparticles during polymerization were characterized by Ultraviolet–visible (UV‐visible) spectroscopy. Characterization of the surfaces was done by scanning electron microscope (SEM), energy dispersive X‐ray spectrum (EDX), and atomic force microscope (AFM). The scanning electron microscopy (SEM) image of PPy shows a smooth surface while PPy‐Au nanocomposite film has a compact morphology. Moreover, energy dispersive X‐ray spectrum (EDX) is evidence for the incorporation of Au nanoparticles. The corrosion protection of coatings was investigated by open circuit potential (OCP) time trends, potentiodynamic polarization technique, and electrochemical impedance spectroscopy (EIS) in a NaCl 3.5% solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41087.     

Study on compatibility of recycled polypropylene/high-density polyethylene blends using rheology

The compatibilization of recycled polypropylene (PP) and high-density polyethylene (HDPE) was studied using two types of compatibilizers: 5 wt% PP-grafted-maleic anhydride (5 wt% MAPP) and 5 wt% HDPE-grafted-maleic anhydride (5 wt% MAHDPE), using a cone and plate rheometer. Maleic anhydride (MAH) was grafted onto PP or HDPE via peroxide initiated melt grafting technique. Blends containing highest amount of pure HDPE exhibited maximum values for tensile strength, complex viscosity, dynamic and loss modulus compared to similar blends developed using recycled HDPE. The latter properties of all the compatibilized blends were higher compared to that of uncompatibilized blends. Studies on rheology of the pure and recycled polymer and its compatibilized blends have thrown some light on the molecular weight distribution of these materials. High shear yielding characteristics were noted for MAHDPE compatibilized blends containing high percentage of HDPE. Scanning electron microscopy showed that blends containing a high percentage of HDPE and HDPE based compatibilizer exhibit a dispersed morphology. Fourier transform infrared spectrometer characterization was conducted to check if compatibilization occurred between recycled PP and HDPE.