Long-term sensor measurements of lung deposited surface area of particulate matter emitted from local vehicular and residential wood combustion sources

Abstract

Lung deposited surface area (LDSA) is a relatively new metric that has been argued to be more accurate at predicting health effects from aerosol exposure. For typical atmospheric aerosol, the LDSA concentration depends mainly on the concentration of ultrafine particles (e.g. vehicular exhaust emissions and residential wood combustion) and therefore optical methods cannot be used to measure and quantify it. The objective of this study was to investigate and describe typical characteristics of LDSA under different urban environments and evaluate how a diffusion charging-based Pegasor AQ Urban sensor (Pegasor Ltd., Finland) can be used as an alternative to optical sensors when assessing local combustion emissions and respective LDSA concentrations. Long-term (12?months) sensor measurements of LDSA were carried out at three distinctly different measurement sites (four sensor nodes) in the Helsinki metropolitan area, Finland. The sites were affected mainly by vehicular exhaust emission (street canyon and urban background stations) and by residential wood combustion (two detached housing area stations). The results showed that the accuracy of the AQ Urban was good (R² = 0.90) for the measurement of LDSA when compared to differential mobility particle sizer. The mean concentrations of LDSA were more than twice as high at the street canyon (mean 22 µm² cm^?3) site when compared to the urban background site (mean 9.4 µm² cm^?3). In the detached housing area, the mean concentrations were 12 µm² cm^?3, and wood combustion typically caused high LDSA peaks in the evenings. High correlations and similar diurnal cycles were observed for the LDSA and black carbon at street canyon and urban background stations. The utilization of a small-scale sensor network (four nodes) showed that the cross-station variability in hourly LDSA concentrations was significant in every site, even within the same detached housing area (distance between the two sites ～670?m).     

Bioprospecting for brewers: Exploiting natural diversity for naturally diverse beers

The burgeoning interest in archaic, traditional, and novel beer styles has coincided with a growing appreciation of the role of yeasts in determining beer character as well as a better understanding of the ecology and biogeography of yeasts. Multiple studies in recent years have highlighted the potential of wild Saccharomyces and non-Saccharomyces yeasts for production of beers with novel flavour profiles and other desirable properties. Yeasts isolated from spontaneously fermented beers as well as from other food systems (wine, bread, and kombucha) have shown promise for brewing application, and there is evidence that such cross-system transfers have occurred naturally in the past. We review here the available literature pertaining to the use of nonconventional yeasts in brewing, with a focus on the origins of these yeasts, including methods of isolation. Practical aspects of utilizing nondomesticated yeasts are discussed, and modern methods to facilitate discovery of yeasts with brewing potential are highlighted.     

Conjugated polymers with polar side chains in bulk heterojunction solar cell devices

Two polymers with polar side chains, namely poly[2,7‐(9,9‐dioctylfluorene)‐alt‐5,5‐(5',8'‐di‐2‐thienyl‐(2',3'‐bis(3''‐(2‐(2‐methoxyethoxy)ethoxy)phenyl)quinoxaline))] ( P1 ) and poly[2,7‐(9,9‐bis(2‐(2‐methoxyethoxy)ethyl)fluorene)‐alt‐5,5‐(5',8'‐di‐2‐thienyl‐(2',3'‐bis(3''‐(2‐(2‐methoxyethoxy)‐ethoxy)phenyl)quinoxaline))] ( P2 ), were synthesized for solar cell application. A series of bulk heterojunction solar cells were systematically fabricated and characterized by varying the electron‐acceptor materials, processing solvents and thickness of the active layer. The results show that P1 , with a higher molecular weight and good film‐forming properties, performed better. The best device showed an open circuit voltage of 0.87 V, a short circuit current of 6.81 mA cm^?2 and a power conversion efficiency of 2.74% with 1:4 polymer:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PCBM[70]) mixture using o‐dichlorobenzene (o‐DCB) as processing solvent. P2 on the other hand showed a poorer performance with chlorobenzene as processing solvent, but a much improved performance was obtained using o‐DCB instead. Thus, an open circuit voltage of 0.80 V, short circuit current of 6.21 mA cm^?2 and an overall power conversion efficiency of 2.22% were recorded for a polymer:PCBM[70] mixing ratio of 1:4. This is presumably due to the improvement of the morphology of the active layer using o‐DCB as processing solvent. © 2013 Society of Chemical Industry     

Insights into corrosion in dye solar cells

The main issue in using low cost metals in dye solar cells is the corrosion caused by the liquid electrolyte. Contrary to typical applications of metals, the adverse effects of corrosion in dye solar cells are related to irreversible depletion of charge carriers from the electrolyte rather than consumption of the metal itself. It is calculated that the penetration rate due to corrosion should not exceed 10⁻⁴ mpy (a couple of nanometers per year) to ensure device lifetime longer than 1 year. This is 10 000 times slower rate than what is considered to be a general benchmark value for very low corrosion rate in the field of corrosion science and has a major effect on how corrosion should be investigated in the case of dye solar cells. Different methods, their applicability, and limitations to investigate corrosion in dye solar cells are evaluated here. The issue with most techniques is that they can detect metals that are clearly corroding, but they have significant limitations in proving a metal stable. Our investigation shows that the most reliable information on corrosion is obtained from complete dye solar cells that are exposed to working conditions. A combination of color analysis of the electrolyte to such measurement is proposed as a means to extrapolate future performance of the cells and estimate potential lifetimes of the dye solar cells in regards to corrosion. Copyright © 2014 John Wiley & Sons, Ltd.     

Oxidation behaviour of a Mo(Si,Al)2 based composite at 1500 °C

The oxidation of a Mo(Si,Al)₂ composite is investigated at 1500 °C in dry air using exposure times from 1 to 1000 h. Cross sections are examined with Scanning Electron Microscopy (SEM) and the phase composition is analyzed by X-ray diffraction (XRD). The material forms a continuous and protective alumina layer, the growth of the alumina layer following parabolic kinetics. Immediately below the scale Mo(Si,Al)₂ is replaced by a Mo₅(Si,Al)₃ layer due to the flux of aluminum to the scale. The Al concentration in the Mo(Si,Al)₂ phase in the underlying substrate decreases from 27% before exposure to 16–17% after 1000 h. The continuous alumina layer becomes covered by a top layer consisting of alumina grains embedded in a viscous melt with approximate composition 7 Na₂O–15 Al₂O₃–78 SiO₂. With time, sodium is volatilized from the melt and the top scale layer transforms to a mixture of alumina, mullite and silica melt.     

On the hierarchy of conservation laws in a cellular automaton

Conservation laws in cellular automata (CA) are studied as an abstraction of the conservation laws observed in nature. In addition to the usual real-valued conservation laws we also consider more general group-valued and semigroup-valued conservation laws. The (algebraic) conservation laws in a CA form a hierarchy, based on the range of the interactions they take into account. The conservation laws with smaller interaction ranges are the homomorphic images of those with larger interaction ranges, and for each specific range there is a most general law that incorporates all those with that range. For one-dimensional CA, such a most general conservation law has—even in the semigroup-valued case—an effectively constructible finite presentation, while for higher-dimensional CA such effective construction exists only in the group-valued case. It is even undecidable whether a given two-dimensional CA conserves a given semigroup-valued energy assignment. Although the local properties of this hierarchy are tractable in the one-dimensional case, its global properties turn out to be undecidable. In particular, we prove that it is undecidable whether this hierarchy is trivial or unbounded. We point out some interconnections between the structure of this hierarchy and the dynamical properties of the CA. In particular, we show that positively expansive CA do not have non-trivial real-valued conservation laws.     

Optical scattering of nanocrystalline Pb(ZrxTi1−x)O3 films

Optical characterization methods, like spectrophotometry at UV–vis-NIR wavelengths and prism-coupler method, were applied to polycrystalline Pb(Zr_xTi_1?x)O₃ thin films at various thicknesses. Thin films were deposited at room temperature by pulsed laser deposition on MgO (1 0 0) substrates and post-annealed at different temperatures. X-ray diffraction and atomic force microscopy were used to characterize the crystal structure and surface morphology of the thin films, respectively.Well oscillating transmission with a sharp fall near the absorption edge was found in films with high orientation and low surface roughness. Changes in the surface morphology and crystal orientation were found to modulate optical interference maxima and minima of the transmittance spectra and to increase the width of the TE₀ mode (Δβ ≈ 0.06) indicating an increase in the scattering losses of the films. Single-phase oriented films had sharpest coupling values (Δβ ≈ 0.005) of the TE₀ mode.     

Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation

Electrical capacitance tomography (ECT) was utilized for monitoring of high-shear mixing and high-shear granulation processes. A finite element method (FEM)-based reconstruction algorithm was utilized to take into account the specific geometrical characteristics of the experimental set-up. Two-dimensional ECT tomograms, mixing index curves and permittivity fractions were computed based on the measurements, and their suitability in the analysis of the processes was assessed. It was found that the different mixing processes and the different granulation processes could be analyzed based on these quantities.     

Degradation of phytate by Pichia kudriavzevii TY13 and Hanseniaspora guilliermondii TY14 in Tanzanian togwa

The fermented cereal-based gruel togwa is used as weaning food for children in Tanzania. Togwa is rich in minerals but these are often not available for uptake in the human intestine due to natural inhibitors, such as phytate (IP(6)). The yeasts Pichia kudriavzevii TY13, Hanseniaspora guilliermondii TY14 and TY20, isolated from Tanzanian togwa, and selected for high phytase activity in complex yeast medium YPD, were now studied regarding their ability to degrade IP(6) in maize-based model togwa. A modified constitutively high-phytase producing Saccharomyces cerevisiae BY80 and commercial Aspergillus ficuum phytase were included for comparison. In addition, a strain of Lactobacillus plantarum was included in the model-togwa set-up. All yeasts in the study grew and reached final cell density 1.5-2 log units higher than the start value. S. cerevisiae BY80 degraded 85% of the IP(6) in 48 h; the same degradation level as with A. ficuum phytase (89%). Of the togwa-isolated yeasts, P. kudriavzevii TY13 and H. guilliermondii TY14 showed strong phytate degradation in the model-togwa; 95% or more of the initial IP(6) was degraded after 48 h. This corresponds to a remaining level of 0.4 and 0.3μmol IP(6)/g dw. Co-inoculation with L. plantarum did not increase IP(6) degradation. Moreover, fermentation with P. kudriavzevii TY13 yielded a successive increase in inorganic phosphate (P(i)), from 0.7 to 5.4 mM, suggesting a phytase production in TY13 which is fairly insensitive to P(i) repression. The study shows that phytate in a model togwa is available for yeast phytase enzymes, and addresses the importance of strain selection for effectively degrading the phytate. Certain yeasts originating from togwa seem to have developed a natural high phytase production, and P. kudriavzevii TY13 and H. guilliermondii TY14 seem particularly well adapted to phytate degradation in togwa, and is our choice for further studies and strain improvement.     

Sixth graders’ evaluation strategies when reading Internet search results: an eye-tracking study

Eye-tracking technology was used to examine Internet search result evaluation strategies adopted by sixth-grade students (N?=?36) during ten experimental information search tasks. The relevancy of the search result’s title, URL, and snippet components was manipulated and selection of search results as well as looking into probabilities on the search result components was analysed. The results revealed that during first-pass inspection, students read the search engine page by first looking at the title of a search result. If the title was relevant, the probability of looking at the snippet of the search result increased. During second-pass inspection, there was a high probability of students focusing on the most promising search result by inspecting all of its components before making their selection. A cluster analysis revealed three viewing strategies: half of the students looked mainly at the titles and snippets; one-third with high probability examined all components; and one-sixth mainly focused on titles, leading to more frequent errors in search result selection. The results indicate that students generally made a flexible use of both eliminative and confirmatory evaluation strategies when reading Internet search results, while some seemed to not pay attention to snippet and URL components of the search results.