Application of GA-Optimized ANNs to Predict the Water Content,CO2 and H2S Absorption Capacity of Diethanolamine (DEA) in Khangiran Gas Sweetening Plant

Theoretical Foundations of Chemical Engineering - In this work, with the aim of accurate prediction of water content, H2S and CO2 absorption capacity of diethanolamine (DEA) solvent in Khangiran...     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

Adaptive stabilization of a class of nonlinear systems using high-gain feedback

This note presents a high-gain feedback stabilizing control algorithm in which the high-gain parameter is adapted on-line. The algorithm is developed for a class of nonlinear systems which can be viewed as the nonlinear counterpart of uniform rank systems. The system can be unknown except for a number of vital pieces of information. For single-input single-output linear systems such information is usually required in the traditional adaptive control literature.     

Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

The development and application of a multiple wavelength illumination technique for the vision-based process monitoring of aero-structure riveting

Airframe riveting is a critical process that requires high levels of process monitoring and quality assurance due to the very high risk associated with the failure of such joints. This paper describes the development of the enabling technology developed for a machine vision-based process monitoring system. One of the key factors affecting the performance of a machine vision system is the quality of the lighting. In the application described in this paper the available lighting was severely limited by the confined space in which the system had to operate. The problem was also compounded by the reflective nature of the objects to be examined. The initial images obtained were not suitable for further processing due to the presence of significant shadows and specular reflections. A novel solution to this problem based on multiple wavelength illumination and signal processing is presented along with results from experimental trials of the approach.     

General Solution for the Dynamic Modeling of Parallel Robots

In this paper, we present a general method to calculate the inverse and direct dynamic models of parallel robots. The models are expressed in a closed form by a single equation in which all the elements needed are expressed. The solution is given in terms of the dynamic models of the legs, the dynamics of the platform and some Jacobian matrices. The proposed method is applied in this paper on two parallel robots with different structures. Categories (2), (3).     

Diazepam alters caffeine-induced effects on beta-endorphin levels in specific rat brain regions

The present study was conducted to evaluate the effects of caffeine and the benzodiazepine agonist diazepam, and a combination of both on beta-endorphin (beta-EN) levels in specific rat brain regions. Male Sprague-Dawley rats (150-200 g) adapted to a 12-hour light: 12-hour dark illumination cycle were used in this study. Caffeine (10 mg/kg), diazepam (2 mg/kg) or a combination of caffeine (10 mg/kg) and diazepam (2 mg/kg) were administered intraperitoneally to rats at 11:00 hr. Control animals were injected with saline. Animals were sacrificed by decapitation 1 h after injection, the brains were immediately removed; the cortex, hippocampus, hypothalamus and midbrain were dissected and their B-EN levels measured by radioimmunoassay. Caffeine administration significantly increased B-EN levels in the cortex. Similarly, administration of diazepam alone resulted in a significant increase of B-EN levels in cortex. However, concurrent administration of diazepam and caffeine resulted in higher increase of B-EN levels in cortex. No significant changes in B-EN levels were detected in hippocampus and midbrain after administration of either caffeine or diazepam alone. On the other hand, when diazepam and caffeine were concurrently administered a significant increase of B-EN levels were observed in the midbrain. Moreover, administration of diazepam alone resulted in a significant increase of B-EN levels in hypothalamus. This increase was still observed following concurrent administration of diazepam and caffeine. These results clearly indicate that diazepam alters caffeine-induced effects on B-EN in specific rat brain regions.     

An on-line microcomputer-based respiratory monitor for manual materials handling

The main objective of the present study is to develop a low cost microcomputer-based respiratory system that is capable of computing the oxygen consumption and minute ventilation of individuals engaged in manual materials handling on an on-line basis. The design, specifications, and merits of the system are given. The software package developed was written in assembly language for the IBM AT personal computer.     

Methodologies for characterizing traffic in wide area networks: Analysis and benchmarking

Since computer networks play an important role in distributed computing environments, an application's performance depends heavily on the quality of service provided by the communication networks. To ensure a high performance, the characteristics of wide area networks, WANs, must be well understood. This paper presents methodologies to characterize WAN traffic based on real measurements from Bellcore's backbone network that connects remote sites using dedicated T1 links. This paper also suggests some workload models that can be used for wide area network sizing and performance evaluation studies. It is found that the inter-site traffic pattern depends on the time of the day and the day of the week. Furthermore, the traffic between two sites is found to be reasonably symmetric, except for those sites designated as back-up sites. The coefficient of variation is used as a measure for the traffic burstiness and it is found to be 1·5 degree during working hours. The methods presented here are easy to use and cost-effective.