CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Influence of different viscosity grade cellulose-based polymers on the development of valsartan controlled release tablets

This work is based on formulating and optimizing controlled release (CR) valsartan (160 mg) tablets using different viscosity grades of the cellulosic polymer. The objective was to develop an effective once-daily drug delivery system of this cardiovascular agent. Central composite design was used for designing the formulations. Polymers used were Methocel® K4M, K15M and K100M. Compatibility of excipients with active was studied through FT-IR. Micromeritic properties were determined and formulations exhibiting appropriate flow characteristics were compressed. Swelling behavior and in vitro buoyancy effect were studied and response surface curves were constructed to optimize the formulation. Multi-point dissolution profiles of valsartan CR tablets at pH 1.2, 4.5 and 6.8 were obtained. Model-dependent and model-independent methods were performed including f2, stability test as per ICH guidelines and ANOVA. FT-IR studies revealed the compatibility of valsartan with all excipients. Formulation K4T9 (containing 25% K4M polymer) was selected to be the best optimized trial, based on physical properties and controlled release profile (23% at 4 h, 82% at 16 h and 100% at 24 h). Results of buoyancy and swelling behavior indicated that HPMC-K4M polymer exhibited excellent floating lag time and swelling indexes. In vitro drug release kinetics showed that formulation K4T9 displayed Korsmeyer–Peppas drug release pattern with r value > 0.99. The manufacturing process of K4T9 was also found to be reproducible with a shelf life period of 41 and 36 months at room temperature and accelerated conditions, respectively. Valsartan CR matrix-based formulation was successfully prepared with Methocel K4M retardant.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.     

Sign Language to Sentence Formation: A Real Time Solution for Deaf People

Communication is a basic need of every human being to exchange thoughts and interact with the society. Acute peoples usually confab through different spoken languages, whereas deaf people cannot do so. Therefore, the Sign Language (SL) is the communication medium of such people for their conversation and interaction with the society. The SL is expressed in terms of specific gesture for every word and a gesture is consisted in a sequence of performed signs. The acute people normally observe these signs to understand the difference between single and multiple gestures for singular and plural words respectively. The signs for singular words such as I, eat, drink, home are unalike the plural words as school, cars, players. A special training is required to gain the sufficient knowledge and practice so that people can differentiate and understand every gesture/sign appropriately. Innumerable researches have been performed to articulate the computer-based solution to understand the single gesture with the help of a single hand enumeration. The complete understanding of such communications are possible only with the help of this differentiation of gestures in computer-based solution of SL to cope with the real world environment. Hence, there is still a demand for specific environment to automate such a communication solution to interact with such type of special people. This research focuses on facilitating the deaf community by capturing the gestures in video format and then mapping and differentiating as single or multiple gestures used in words. Finally, these are converted into the respective words/sentences within a reasonable time. This provide a real time solution for the deaf people to communicate and interact with the society.     

Enhanced Catalytic,Antibacterial and Anti-cancer Activities of Erythromycin Capped Gold Nanoparticles

Journal of Inorganic and Organometallic Polymers and Materials - In this study, the nanosized spherical erythromycin capped gold nanoparticles (eryth-Au(0)NPs) were fabricated for the first time....     

N‐halamine‐modified polyglycolide (PGA) multifilament as a potential bactericidal surgical suture: In vitro study

In this study, new cationic homopolymer and anionic copolymer were synthesized, and deposited onto polyglycolide sutures using a layer‐by‐layer assembly technique. The coated sutures were rendered antibacterial by chlorinating with dilute solution of household bleach solution at pH 7. The chlorination treatment transformed the N? H groups of anionic copolymer into N‐halamine structures. The N‐halamine‐modified sutures were challenged with Staphylococcus aureus and Escherichia coli O157:H7 bacteria at different contact times. The suture with chlorine loading of 0.22% completely inactivated both bacterial strains in 30 min contact time. Fourier transform infrared spectroscopy, scanning electron microscopy, and analytical titration confirmed the successful deposition of the N‐halamine multilayers. The effect of layer‐by‐layer coatings of polyelectrolytes on the chlorine loading and antibacterial efficacy of sutures was evaluated. The straight‐pull and knot‐pull strength tests performed on the sutures reported slight decline in tensile properties after chlorination treatment. The in vitro hemolysis and cytocompatibility tests revealed that the N‐halamines‐based antibacterial sutures were biocompatible. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42483.     

Copper substituted nickel ferrite nanoparticles anchored onto the graphene sheets as electrode materials for supercapacitors fabrication

Nickel ferrites with high theoretical capacitance value as compared to the other metal oxides have been applied as electrode material for energy storage devices i.e. batteries and supercapacitors. High tendency towards aggregation and less specific surface area make the metal oxides poor candidate for electrochemical applications. Therefore, the improvements in the electrochemical properties of nickel ferrites (NiFe₂O₄) are required. Here, we report the synthesis of graphene nano-sheets decorated with spherical copper substituted nickel ferrite nanoparticles for supercapacitors electrode fabrication. The copper substituted and unsubstituted NiFe₂O₄ nanoparticles were prepared via wet chemical co-precipitation route. Reduced graphene oxide (rGO) was prepared via well-known Hummer's method. After structural characterization of both ferrite (Ni_1-xCu_xFe₂O₄) nanoparticles and rGO, the ferrite particles were decorated onto the graphene sheets to obtain Ni_1-xCu_xFe₂O₄@rGO nanocomposites. The confirmation of preparation of these nanocomposites was confirmed by scanning electron microscopy (SEM). The electrochemical measurements of nanoparticles and their nanocomposites (Ni_0.9Cu_0.1Fe₂O₄@rGO) confirmed that the nanocomposites due to highly conductive nature and relatively high surface area showed better capacitive behavior as compared to bare nanoparticles. This enhanced electrochemical energy storage properties of nanocomposites were attributed to the graphene and also supported by electrical (I-V) measurements. The cyclic stability experiments results showed ~65% capacitance retention after 1000 cycles. However this retention was enhanced from 65% to 75% for the copper substituted nanoparticles (Ni_0.9Cu_0.1Fe₂O₄) and 65–85% for graphene based composites. All this data suggest that these nanoparticles and their composites can be utilized for supercapacitors electrodes fabrication.     

Binary phase solid-state photopolymerization of acrylates: design,characterization and biomineralization of 3D scaffolds for tissue engineering

Porous polymer scaffolds designed by the cryogel method are attractive materials for a range of tissue engineering applications. However, the use of toxic crosslinker for retaining the pore structure limits their clinical applications. In this research, acrylates (HEA/PEGDA, HEMA/PEGDA and PEGDA) were used in the low-temperature solid-state photopolymerization to produce porous scaffolds with good structural retention. The morphology, pore diameter, mineral deposition and water absorption of the scaffold were characterized by SEM and water absorption test respectively. Elemental analysis and cytotoxicity of the biomineralized scaffold were revealed by using XRD and MTT assay test. The PEGDA-derived scaffold showed good water absorption ability and a higher degree of porosity with larger pore size compared to others. XRD patterns and IR results confirmed the formation of hydroxyapatite crystals from an alternative socking process. The overall cell proliferation was excellent, where PEGDA-derived scaffold had the highest and the most uniform cell growth, while HEMA/PEGDA scaffold showed the least. These results suggest that the cell proliferation and adhesion are directly proportional to the pore size, the shape and the porosity of scaffolds.