Achieving communication security, along with high computational efficiency, is one of the challenging issues in the advancement of modern resource constraint wireless networks. Wireless physical layer secure key extraction in conjunction with suitable preprocessing techniques may be a possible way out. Principal component analysis (PCA) is one of the dimensionality reduction techniques employed commonly in various domains for different applications. However, the physical layer secure key extraction employing PCA as dimensionality reduction is untouched so far. This paper presents a comprehensive study on PCA based wireless secret key extraction with real-time experimentation. In this work, we propose to apply PCA as a preprocessing technique to reduce the total number of numerical computations required in the key generation process, by cutting down the dimension of the input data set. We propose to select the extracted principal components to be processed further for key generation, based on their information content and cross-correlation. We analyzed the performance of the proposed in terms of bit disagreement rate, key randomness and pass ratio. The computational complexity of the proposed approach is derived and the effect of dimensionality reduction factor (\({\mathbf{R}}_{\mathbf{f}}\)) on the required numerical computations is analyzed. It is found that substantial improvement in bit disagreement performance is achieved along with a significant reduction in the required numerical computations. Remarkably, these outcomes are achieved by slightly modifying one of the blocks of the traditional key generation system. Furthermore, the practicability of the proposed technique is verified through real-time experimentation in different physical scenarios.
Biochar has been used as an environment-friendly enhancer to improve the hydraulic properties(e.g.suction and water retention) of soil.However,variations in densities alter the properties of the soil-biochar mix.Such density variations are observed in agriculture(loosely compacted) and engineering(densely compacted) applications.The influence of biochar amendment on gas permeability of soil has been barely investigated,especially for soil with diffe rent densities.The maj or obj ective of this study is to investigate the water retention capacity,and gas permeability of biochar-amended soil(BAS) with different biochar contents under varying degree of compaction(DOC) conditions.In-house produced novel biochar was mixed with the soil at different amendment rates(i.e.biochar contents of 0%,5% and 10%).All BAS samples were compacted at three DOCs(65%,80% and 95%) in polyvinyl chloride(PVC)tubes.Each soil column was subjected to drying-wetting cycles,during which soil suction,water content,and gas permeability were measured.A simplified theoretical framework for estimating the void ratio of BAS was proposed.The experimental results reveal that the addition of biochar significantly decreased gas permeability k_g as compared with that of bare soil(BS).However,the addition of 5%biochar is found to be optimum in decreasing kg with an increase of DOC(i.e.k_(g,65%) k_(g,80%) k_(g,95%)) at a relatively low suction range(200 kPa) because both biochar and compaction treatment reduce the connected pores. 相似文献
We report the mechanism involved in sol-gel auto-combustion synthesis of Ba–Sr-hexaferrite (Ba1-xSrxFe12O19; x = 0, 0.25, 0.5, 0.75 and 1, BSFO) ceramic powders through the analysis of the phases evolved during annealing of the as-synthesized powders, along with their structure and morphological studies. The XRD patterns of the as-synthesized samples indicate the formation of barium/strontium monoferrite ((Ba/Sr)Fe2O4) and maghemite (γ-Fe2O3) phases along with a minute amount of hematite (α-Fe2O3) phase. Annealing of these samples facilitates formation of BSFO phase through the solid state reaction between BaFe2O4 and γ-Fe2O3 phase. Interestingly, after annealing the samples with x = 0, 0.5 and 1, at 1000 °C for 2 h, we observed that phase pure Ba–Sr hexaferrite structure forms, but for samples with x = 0.25 and 0.75, high amount of hematite (α-Fe2O3) phase is observed, especially for x = 0.75. The reason associated with this could be the large difference between the ionic radii of Ba2+ and Sr2+ ions occupying the oxygen site. Furthermore, our study on annealing dependent phase evolution confirms that, this difference in ionic radii forbids the formation of a single phase Ba–Sr hexaferrite. The growth of clear hexagonal-shaped plate-like particles with varied particle sizes was observed for all the samples. The particle size variation may be due to the influence of the ionic radii difference on the sinterability of the samples. Our study provides a better understanding of synthesis mechanism of Ba–Sr hexaferrite samples. 相似文献
Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO2 sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications. 相似文献
This article presents a hands‐off control design for discrete‐time nonlinear system with a special type of nonlinear sector termed as “discrete‐time sector.” The design method to define the boundary of a discrete‐time sector is done with control‐Lyapunov function. The generalization of nonlinear system is viewed in the perspective of a comparison function. By means of a proposed sector, a switching control is designed such that no control action is experienced inside the sector thus, saving unnecessary control efforts. However, to study the robustness for discrete‐time system, a hands‐off control is modified to ensure the monotonic decrease in the energy of the system. Finally, the proposed approach is verified with the simulation results. 相似文献
Synthesis of mono-crystalline Ga2O3 Nanorods was done by sol-gel transformation of gallium(III) isopropoxide (Ga(OPri)3). XRD studies were done to determine the planes and crystal structure of synthesized nanorods that showed the synthesis of β-Ga2O3(a). TEM studies of synthesized Ga2O3 confirmed the synthesis of monocrystalline β-Ga2O3 nanorods. To study the effect of precursor chemistry and to determine role of precursor structures on the crystal structure, phase and morphology of the Ga2O3, a new modified precursor complex was synthesized. The reaction of Ga(OPri)3 with N-phenylsalicylaldimine, [C6H4(OH)CH=N(C6H5)] in 1:1?M ratio yielded [{(H5C6)N?=?CH-C6H4O}Ga(OPri)2]. The newly synthesized complex was characterized by elemental analyses, molecular weight measurement, FT-IR and NMR (1H and 13C) spectral studies. Spectral studies of the modified complex suggest the presence of bi-dentate mode of attachment of Schiff's base in the solution state. Sol-gel transformations of [{(H5C6)N?=?CH-C6H4O}Ga(OPri)2] in organic medium, yielded γ-Ga2O3(b), as found by XRD studies. TEM image of the sample (a) revealed the formation of nano-rods of oxide with average diameter of ~100?nm whereas the TEM image of sample (b) showed presence of nano-sized particles of oxide with average particle size of 10?nm. Morphological and compositional studies of synthesized samples (a) and (b) were carried out using SEM and EDX. The method provides a possibility of large scale synthesis of dissimilar shaped and pure Ga2O3 nanoparticles. 相似文献
Lithium-ion cells are preferred in the electrical powertrain due to high-power density, compactness, and modularity. In real driving conditions, the cells undergo discharge rates as high as 4 C resulting in high heat generation affecting the performance. To obtain the maximum performance the pack construction and thermal management of cells are crucial parameters. In our work, air-cooled technique with diverse air inlet and staggered scheme with a two-channel partition approach for thermal management of the cylindrical lithium-ion cells are studied in computational fluid dynamics. The simulation model is validated with experimental results. The obtained results demonstrate that the cells in the dual-directional air inlet arrangement had low maximum temperature difference among and within the cells and required least fan work. This arrangement required least fan work to generate optimal air inlet velocity of 2 m/s for 1, 2, and 3 C and 4 m/s for 4 C discharge rates. There is a reduction of 50% and 33% fan work for 3 and 4 C discharge rates, which are the majority operating points. Also, it shows that the temperature uniformity within the cells has improved. The results of this study can used to optimize parameters for designing an enhanced thermal management system. 相似文献
High-porosity yttria- and ytterbia-stabilized zirconia aerogels offer the potential of extremely low thermal conductivity materials for high-temperature applications. Yttria- and ytterbia-doped zirconia aerogels were synthesized using a sol-gel approach over the dopant range of 0-20 atomic percent. Surface area, pore volume, and morphology of the as-dried aerogels and materials thermally exposed for short periods of time to temperatures up to 1200°C were characterized by nitrogen physisorption, scanning and transmission electron microscopy, and X-ray diffraction. The aerogels as supercritically dried all were X-ray amorphous. At a 5% dopant level, a tetragonal structure with a smaller monoclinic phase developed on thermal exposure. Mixed tetragonal and cubic phases or predominantly cubic materials were observed at higher dopant levels, depending on the dopant level, temperature and exposure time. The formation of crystalline phases was accompanied by loss of surface area and pore volume, although some mesoporous structure was maintained on short-term exposure to 1000°C. Incorporation of the smaller Yb atom into the lattice structure resulted in smaller lattice dimensions on crystallization than was seen with Y doping and favored a more highly equiaxed structure. Aerogels synthesized with 15% Y maintained the smallest particle size without evidence of sintering at 1100°C. Largest shrinkage and loss of pore volume occurred on crystallization from the amorphous phase, with further loss of pores at temperatures above 1000°C attributable to changes in lattice parameters. 相似文献
Wireless Personal Communications - The recent trend in wireless technology has been tremadously increased the demand of higher frequency bands from every corners of the mobile technology. As next... 相似文献