Processing of a Silicon-Carbide-Whisker-Reinforced Glass-Ceramic Composite by Microwave Heating

A calcium magnesium aluminosilicate-based glass that contained 10 wt% of silicon carbide whiskers (SiC _w ) as reinforcement was prepared by tape casting, followed by sintering either in a conventional furnace or in a microwave oven. The results were consistent with retardation of glass sintering through whisker bridging. The glass, by itself, was sintered to almost-full density at 750°C for 4 h by conventional furnace sintering; the best sintered composite, with an estimated density of ∼90%, was obtained at 800°C with a dwell time of 4 h. Sintering at a temperature of >800°C did not improve the densification but rather resulted in severe whisker oxidation. A reduced densification rate was observed for the samples that were sintered in nitrogen. By contrast, in the microwave oven, almost-full density for the glass and ∼95% of the theoretical density for the composite were obtainable at 850°C for 15 min, which represented a reduction of ∼10 h of the total processing time and a reduced SiC _w oxidation.     

Ceramic Microtubes from Preceramic Polymers

A novel process for the production of ceramic microtubes involving the microextrusion of preceramic polymers was studied. Microtubes with a wide range of inner and outer diameters and several centimeters long were produced from two silicone resins. A coextrusion approach was also used to extend the forming capability of the technique. The addition of carbon black resulted in electrically conductive silicon oxycarbide (SiOC) ceramic microtubes. SiOC microtubes possessed a high bending strength, ranging from ∼30–1100 MPa.     

Nucleation and Crystallization of New Glasses from Fly Ash Originating from Thermal Power Plants

The nucleation and crystallization kinetics of new glasses obtained by melting mixtures of a Spanish carbon fly ash with glass cullet and dolomite slag at 1500°C has been evaluated by a calculation method. These glasses, whose microstructure was examined by TEM carbon replica, were susceptible to controlled crystallization in the 800°–1100°C range. The resulting glass-ceramics developed acicular and branched wollastonite crystals or a network of dendritic pyroxene mixed with anorthite feldspar (SEM and EDX analysis). The time–temperature–transformation curves (processing of the XRD data) showed the crystallization kinetics and the critical cooling rate to be in the 12°–42°C/min range.     

Pulsed laser deposition of organic and biological materials

We report on the deposition of soft matter thin films by Matrix Assisted Pulsed Laser Evaporation (MAPLE). In particular, thin layers of biological material (Bovine Serum Albumin) and polymers (polyfluorene) for medical and optoelectronic applications, were realized by laser irradiating a frozen solution containing a low amount of material diluted in a laser absorbing volatile solvent. The depositions were carried out varying different parameters as solvent–solute concentration, solvent nature, laser fluencies, etc. The optical, morphological, structural and spectroscopical properties were detected by means of different analyses as FTIR, photoluminescence, AFM and SDS.     

Detailed kinetic modeling of the thermal degradation of lignins

The aim of this kinetic work is to provide a better understanding of the pyrolysis of lignin and biomasses not only in terms of devolatilazation rate but also of the volatile species released. The complexity of both lignin structure and its degradation mechanism meant that a lumping approach suitable for handling the huge amount of initial, intermediate and final products had to be used. Despite these simplifications, the proposed semi-detailed kinetic scheme involves about 100 molecular and radical species in 500 elementary and lumped reactions. It has already been proved that this lignin devolatilization model correctly predicts the degradation rates and the detail of the released products. This work constitutes an initial yet significant step towards deriving a complete kinetic scheme of biomass devolatilization.     

The importance of landscape in wine quality perception: An integrated approach using choice-based conjoint analysis and combination-based permutation tests

This work’s aim is to evaluate the importance of landscape in wine quality perception using a novel integrated approach based on two statistical techniques, i.e. choice-based conjoint analysis (Gustafsson et al., 2001) and combination-based permutation tests (Corain and Salmaso, 2004, Pesarin and Salmaso, 2009a). To this end we developed a preference choice experiment which was submitted to a sample of respondents during blind wine tasting meetings. The obtained results allow us to weigh up and emphasise the importance of an attractive landscape to the perception of a finer quality of wine. Indeed, we noticed that associating wine to an image of greater visual impact, i.e. an evocative landscape, induces a significantly higher preference for the tasted wine. Moreover, the integrated application of choice-based conjoint analysis and combination-based permutation tests allows us to identify the specific relationship each market segment has with landscape, price and wine quality.     

Room-Temperature Degradation of t-Zr(Pr)O2 in an Aqueous Suspension Revealed by Perturbed Angular Correlations

This paper deals with the phase stability of an aqueous suspension of tetragonal Zr_0.9Pr_0.1O₂ (20 wt%/vol%) at room temperature as a function of the aging time. The suspension is investigated in situ using the highly localized Perturbed Angular Correlations technique. The results indicate that an almost fully reversible degradation process toward monoclinic zirconia takes place through a first-order reaction of rate constant k =0.7 day⁻¹. Two successive diffusion mechanisms are observed that are interpreted as OH⁻ ions' migration in the grain surface and then, as proton defects' diffusion into the bulk.     

Some reliability aspects in structural control

The reliability aspects associated with the system made of an actively controlled structure and its control devices are discussed. Standard tools of system reliability analysis turns out to be a convenient approach to the problem. The operation scenario however is preliminarily required and some redundancy solutions are discussed in this article.