Ternary Blends of Renewable Fast Pyrolysis Bio-Oil,Advanced Bioethanol,and Marine Gasoil as Potential Marine Biofuel

An alternative for reducing emissions from marine fuel is to blend bio-oil from lignocellulose non-edible feedstocks to diesel fossil fuels. Phase diagrams of the ternary systems were built to represent the transition from heterogeneous regions to homogeneous regions. Four homogeneous blends of bio-oil of eucalyptus-bioethanol-marine gasoil were experimentally characterized with respect to the most important fuel parameters for marine engines: water content, flash point, low heating value, viscosity, and acidity. Blends with closer properties to marine gasoil replacement, lower costs, and environmental impacts should be tested for large engines.     

Phase Equilibria in the Na2O-Cs2O-SiO2 System

The Na₂O-Cs2O-SiO₂ system has been investigated by means of a new differential thermal analysis apparatus. Two compounds have been observed for the first time in the metasilicate and disilicate joins. The CsNaSi₂O₅ disilicate melts congruently at 1217 K and the peritectic fusion of the CsNaSiO₃ metasilicate occurs at 1120 K.     

Lowpass and bandpass transadmittance filter using operational amplifier pole

A new topology simultaneously implementing lowpass (LP) and bandpass (BP) transadmittance filtering signals using a single operational amplifier (OA), one capacitor, and two resistors is presented. The input impedance is very high which is essential for cascading without employment of buffers. The circuit uses absolute minimum number of active and passive components. The filter employs pole-model of OA and as such has acquired suitability for extended frequency operation. The circuit permits separate adjustment of natural frequency (ω₀) and quality factor (Q) in an orthogonal manner. The circuit has low sensitivity figures unlike the reported single amplifier biquads. The PSPICE simulation results are included.     

Modified salp swarm algorithm for global optimisation

Neural Computing and Applications - Salp swarm algorithm (SSA) is a newly swarm-based metaheuristic algorithm that simulate the swimming and foraging behaviour of salps in oceans so to search for...     

Quality assessment of 3D synthesized images based on structural and textural distortion

Depth image based rendering (DIBR) is a popular technique for rendering virtual 3D views in stereoscopic and autostereoscopic displays. The quality of DIBR-synthesized images may decrease due to various factors, e.g., imprecise depth maps, poor rendering techniques, inaccurate camera parameters. The quality of synthesized images is important as it directly affects the overall user experience. Therefore, the need arises for designing algorithms to estimate the quality of the DIBR-synthesized images. The existing 2D image quality assessment metrics are found to be insufficient for 3D view quality estimation because the 3D views not only contain color information but also make use of disparity to achieve the real depth sensation. In this paper, we present a new algorithm for evaluating the quality of DIBR generated images in the absence of the original references. The human visual system is sensitive to structural information; any deg radation in structure or edges affects the visual quality of the image and is easily noticeable for humans. In the proposed metric, we estimate the quality of the synthesized view by capturing the structural and textural distortion in the warped view. The structural and textural information from the input and the synthesized images is estimated and used to calculate the image quality. The performance of the proposed quality metric is evaluated on the IRCCyN IVC DIBR images dataset. Experimental evaluations show that the proposed metric outperforms the existing 2D and 3D image quality metrics by achieving a high correlation with the subjective ratings.

     

Electric field assisted solid-state interfacial joining of TaC-HfC ceramics without filler

The application of ultra-high-temperature ceramics (UHTCs) demands effective ways of joining in overcoming the problems associated with the fabrication of complex-shaped components. In this study, we choose to investigate a new method of rapidly joining pre-sintered TaC and HfC ceramics without any filler material using the spark plasma sintering (SPS) technique. A well-bonded TaC–HfC interface was observed with no apparent cracking and porosity at the joint. The joining mechanisms were predominantly driven by solid-state diffusion and localized plastic deformation. The nanomechanical properties of the TaC-HfC joint are better than the HfC while comparable to that of the TaC. High-load indentation (up to 200 N) results suggest that the TaC–HfC interface is stronger than the parent UHTCs with no crack propagating at the interface. Upon comparison with the parent UHTCs, the damaged area and the average crack length at the interface, reduced up to ~94% and ~56%, respectively. This study shows that the SPS technique can also apply to joining other UHTCs without any filler, resulting in the new field of developing complex components for the thermal protection system (TPS).     

Poly(vinylidene fluoride) with zinc oxide and carbon nanotubes applied to pressure sheath layers in oil and gas pipelines

In this work, PVDF composites containing 0.2% (m/m) of carbon nanotubes (MWCNTs), PVDF with 5.0% (m/m) of zinc oxide (ZnO), and composites containing both particles in the same contents in the matrix were melt processed in a mini-extruder machine with double screws, using the counter-rotation mode. Composites were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), dynamic-mechanical analysis (DMA), and contact angle tests (CA). The samples presented the predominance of the α phase, with an increased degree of crystallinity as well as an increase in dimensional stability by incorporating both fillers, showing a synergistic effect between these particles, as shown on FTIR, DSC, and XRD results. SEM images showed a good dispersion of high aspect ratio particles. In general, DMA and TGA analysis showed that composites had not decreased their thermal and mechanical performance when compared to neat PVDF. Results of CA analysis showed an increase in the hydrophobicity of the sample containing MWCNTs. Permeability tests were also performed using a differential pressure system, combining high temperature and pressure, obtaining permeability measures and time lag. This work presents an alternative of composite materials, suggesting its application in the internal pressure sheath layers of oil and gas flexible pipes.     

Majority bargaining for resource division

We address the problem of how a set of agents can decide to share a resource, represented as a unit-sized pie. The pie can be generated by the entire set but also by some of its subsets. We investigate a finite horizon non-cooperative bargaining game, in which the players take it in turns to make proposals on how the resource should for this purpose be allocated, and the other players vote on whether or not to accept the allocation. Voting is modelled as a Bayesian weighted voting game with uncertainty about the players’ weights. The agenda, (i.e., the order in which the players are called to make offers), is defined exogenously. We focus on impatient players with heterogeneous discount factors. In the case of a conflict, (i.e., no agreement by the deadline), no player receives anything. We provide a Bayesian subgame perfect equilibrium for the bargaining game and conduct an ex-ante analysis of the resulting outcome. We show that the equilibrium is unique, computable in polynomial time, results in an instant Pareto optimal outcome, and, under certain conditions provides a foundation for the core and also the nucleolus of the Bayesian voting game. In addition, our analysis leads to insights on how an individual’s bargained share is influenced by his position on the agenda. Finally, we show that, if the conflict point of the bargaining game changes, then the problem of determining the non-cooperative equilibrium becomes NP-hard even under the perfect information assumption. Our research also reveals how this change in conflict point impacts on the above mentioned results.     

SOA$$^\mathrm{}$$: a new way to design the decision in SOA—based on the new standard Decision Model and Notation (DMN)

In recent years, Service Oriented Architecture (SOA) technologies are emerging as a powerful vehicle for organizations that need to integrate their applications within and across organizational boundaries. In addition, organizations need to make better decisions more quickly. Moreover, they need to change those decisions immediately to adapt to this increasingly dynamic business environment. It is primarily a question in ensuring the decisional aspect by adopting the SOA as a support architecture. In this paper, we describe a new approach called SOA\(^\mathrm{+d}\) based on a certain number of standards. It is going to be studied on three dimensions: The first is related to the definition of the information system implied in the SOA based on the use case model. The second develops the business dimension which is based on the BPMN (Business Process Modeling Notation). The last dimension addresses the need of decision; we use the new standard decision model and notation (DMN) which is recently approved by Object Management Group (OMG) and considered as a simple notation to specify the decision. Finally, Service Oriented Architecture Modeling Language (SoaML) will be used for design of several services. We also present our meta-model Decisional Model of Service (DMS) to define a new set of concepts necessary for modeling the three levels. Some of them are already known, whereas others are new and are proposed as an element of this work. we illustrate our proposal with a real case study in the Pharmacy Inventory Management.