Fabrication of BSCF-based mixed oxide ionic-electronic conducting multi-layered membrane by sequential electrophoretic deposition process

The Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF)-based multi-layered oxygen separation membrane was fabricated by the sequential electrophoretic deposition (EPD) process. A thin porous/dense bi-layer of BSCF was formed on a thick porous support of BSCF. The porous support prepared by a sacrificial template method using BSCF powder mixed with wheat starch (30 wt%) as a pore-forming agent, followed by uniaxial pressing and low-temperature sintering, was directly used as an EPD electrode. A thin BSCF layer was first formed on the porous support, and then a thin BSCF + PMMA (polymethyl methacrylate) layer was sequentially formed on the thin BSCF layer using a bimodal suspension of BSCF and PMMA. A 30-μm thin porous/dense bi-layer of BSCF of which the total thickness was obtained by optimizing the processes of EPD and subsequent co-sintering. The oxygen separation performance of 3.7 ml (STP) min^?1 cm^?2 at 860 °C was achieved for the BSCF-based multi-layered oxygen separation membrane.     

Structural Characterization of Neutral Glycosphingolipids from 3T3‐L1 Adipocytes

In recent years, obesity has been considered a pathological stage of early lifestyle‐related diseases, and adipose tissue and adipocyte research has been active. Glycosphingolipids are involved in the pathogenesis of type 2 diabetes induced by insulin resistance, but the details of the glycosphingolipid molecular species composition of adipocytes have yet to be elucidated. We used 3T3‐L1 adipocytes and the 1,2‐dichloroethane‐wash method to remove triacylglycerols, which are abundant in adipocytes, and analyzed the structures of glycosphingolipids, particularly neutral glycosphingolipids, using liquid chromatography–mass spectrometry.     

Effect of pitting corrosion on strength of web plates subjected to patch loading

Pitting corrosion is typical corrosion observed on coated hold frames in way of cargo holds of bulk carriers, which exclusively carry coal and iron ore. Extensive survey on the effect of pitting corrosion on structural strength under a wide variety of loading conditions is necessary to clarify the relationship between pitting intensity and residual strength in detail. In the present study, a series of tests has been conducted on structural models which consist of web, shell and face plates to investigate the effect of pitting corrosion on strength of web plates subjected to patch loading. In these tests, artificial pitting was made on the web plates and two equal concentrated loads have been applied vertically at the one third points of simply supported models. It was found that web crippling behavior is strongly affected by the pit distribution on the web plates. According to the FE-analyses following the experiment, ultimate strength of the web plates with pitting under patch loading is a little smaller than or almost the same as that of the web plates with uniform corrosion in terms of average thickness loss.     

Characteristics of humic substances in the Kuji River waters as determined by high-performance size exclusion chromatography with fluorescence detection

Direct measurement by high-performance size exclusion chromatography with fluorescence detection was applied to the characterization of humic substances in river waters from the Kuji River system, which runs through forest hills and an agricultural plain in Japan. The monitoring wavelength of excitation 320 nm and emission 430 nm corresponds to the fluorescence maxima for aquatic fulvic acid. Chromatograms of the river waters showed four peaks; each peak position was in good agreement among these samples. Peak height ratios for the samples from the upstream Kuji River and its tributaries were different from those of the midstream and downstream sections of the Kuji River, which may reflect differences in the characteristics of humic substances and other organic materials supplied from soil to river.     

Structure,transport properties,and dielectric properties of lactic acid/pyruvic acid aqueous solution in a biofuel cell: A molecular simulation study

Molecular dynamics (MD) simulation of lactic acid (L‐acid) and pyruvic acid (P‐acid) in a physiological salt solution has been performed, which is used as the electrolyte in a sort of biofuel cell working on a human skin. The structure, frequency distribution of molecules, dielectric properties, rotational correlation functions, and diffusion coefficients have been calculated. The anomalous behavior of dielectric constants for the lower concentration of L‐acid and P‐acid has been obtained from MD. The anomalous dielectric constant is discussed in relation with the various physical properties of the solution including the life time of the interaction in the solution. MD results suggest that the anomalous behavior is supposed to be attributed to the difference of interactions between ions in the lower and higher concentration region. POLYM. ENG. SCI., 59:2474–2478, 2019. © 2019 Society of Plastics Engineers     

Transient liquid phase sintering of high-purity mullite for high-temperature structural ceramics

High-purity mullite ceramics, promising engineering ceramics for high-temperature applications, were fabricated using transient liquid phase sintering to improve their high-temperature mechanical properties. Small amounts of ultrafine alumina or silica powders were uniformly mixed with the mullite precursor depending on the silica-alumina ratio of the resulting ceramics to allow for the formation of a transient liquid phase during sintering, thus, enhancing densification at the early stage of sintering and mullite formation by the reaction between additional alumina and the residual glassy phase (mullitization) at the final stage of sintering. The addition of alumina powder to the silica-rich mullite precursor resulted in a reaction between the glassy silica and alumina phases during sintering, thereby forming a mullite phase without inhibiting densification. The addition of fine silica powder to the mullite single-phase precursor led to densification with an abnormal grain growth of mullite, whereas some of the added silica remained as a glassy phase after sintering. The resulting mullite ceramics prepared using different powder compositions showed different sintering behaviors, depending on the amount of alumina added. Upon selecting an optimum process and the amount of alumina to be added, the pure mullite ceramics obtained via transient liquid phase sintering exhibited high density (approximately 99%) and excellent high-temperature flexural strength (approximately 320 MPa) at 1500 °C in air. These results clearly demonstrate that pure mullite ceramics fabricated via transient liquid phase sintering with compositions close to those of stoichiometric mullite could be a promising process for the fabrication of high-temperature structural ceramics used in an ambient atmosphere. The transient liquid phase sintering process proposed in this study could be a powerful processing tool that allows for the preparation of superior high-temperature structural ceramics used in the ambient processing atmosphere.     

Cooperative Control by System Voltage Control Equipments in Consideration of Reducing Capacity of STATCOM

In recent years, the number of renewable energy sources (RESs) such as photovoltaic generation systems and wind power generation systems connected to the grid has been increasing as a way of reducing negative effects on the environment. The outputs of these RESs vary rapidly because of the influence of the weather and the conditions of the location. Therefore, there are concerns that the point voltages in a distribution system may vary drastically and that the voltages may deviate from the appropriate voltage range as a result of the influence of the RES connected to the distribution system or to the diversification of loads. Furthermore, there are concerns about adverse effects on electric power quality, such as voltage imbalances and harmonics. In this paper, we propose a cooperative voltage control method for a distribution system using system voltage control equipment in order to reduce the capacity of the static synchronous compensator. Numerical calculations were performed in order to verify the validity of the proposed method.