Improvements of the structural,thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Investigations on the production and development of nanoparticle-reinforced polymer materials have been attracted attention by researchers. Various nanoparticles have been used to improve the mechanical, chemical, thermal, and physical properties of polymer matrix composites. Boron compounds come to the fore to improve the mechanical and thermal properties of polymers. In this study, mechanical, thermal, and structural properties of structural adhesive have been examined by adding nano hexagonal boron nitride (h-BN) to epoxy matrix at different percentages (0.5, 1, 2, 3, 4, and 5%). For this purpose, nano h-BN particles were functionalized with 3-aminopropyltriethoxysilane (APTES) to disperse the h-BN nanoparticles homogeneously in epoxy matrix and to form a strong bond at the matrix interface. Two-component structural epoxy adhesive was modified by using functionalized h-BN nanoparticles. The structural and thermal properties of the modified adhesives were investigated by scanning electron microscopy and energy dispersion X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis techniques. Tensile test and dynamic mechanical analysis were performed to determine the mechanical properties of the adhesives. When the results obtained from analysis were examined, it was seen that the nano h-BN particles functionalized with APTES were homogeneously dispersed in the epoxy matrix and formed a strong bond. In addition that, it was concluded from the experimental results that the thermal and mechanical properties of adhesives were improved by adding functionalized nano h-BN particles into epoxy at different ratios.     

Structural,thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

In the presented study, the structural, thermal, and mechanical properties of the nanocomposites were investigated by doping silanized hexagonal boron carbide (h-B₄C) nanoparticles in varying proportions (0.5%, 1%, 2%, 3%, 4%, and 5%) into the epoxy resin by weight. For this purpose, the surfaces of h-B₄C nanoparticles were silanized by using 3-(glycidyloxypropyl) trimethoxysilane (GPS) to improve adhesion between h-B₄C nanoparticles and epoxy matrix. Then, the silanized nanoparticles were added to the resin by ultrasonication and mechanical stirring techniques to produce nanocomposites. The bond structure differences of silanized B₄C nanoparticles (s-B₄C) and nanoparticle doped composites were investigated by using Fourier transform infrared spectroscopy. Scanning electron microscopy and energy dispersion X-ray spectroscopy (SEM-EDS) technique was used to examine the distribution of nanoparticles in the modified nanocomposites. Differential scanning calorimetry and thermogravimetric analysis techniques were used to determine the thermal properties of the neat and s-B₄C doped nanocomposites. The tensile test and dynamic mechanical analysis were performed to determine the mechanical properties. When the experimental results were examined, changes in the bonding structure of the s-B₄C nanoparticles doped nanocomposites and significant improvements in the mechanical and thermal properties were observed. The optimum doping ratio was determined as 2% by weight. At this doping ratio, the T_g, tensile strength and storage modulus increased approximately 18%, 35%, and 44% compared to the neat composite, respectively.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Synthesis of novel acrylic modified water reducible alkyd resin: Investigation of acrylic copolymer ratio effect on film properties and thermal behaviors

New four‐component water reducible acrylic modified alkyd resins that are based on 1,3‐propanediol and contain different ratios of acrylic copolymer (AC) were synthesized by using a novel four‐stage fatty acid method. The final content of solids in the water reducible acrylic modified alkyd resins was 60% by weight. After the modified alkyd resin films were cured at 150°C for 1 h, it was observed that the use of AC as the modifier component had improved their physical and chemical surface coating properties and thermal behaviors. Experimental results show that the optimum AC ratio is 40% of the equivalent amount of AC to alkyd resin. Low‐volatile organic compounds (VOC) content water reducible acrylic modified alkyd resins yielded soft and flexible films with high chemical/thermal resistance, suitable for manufacturing of surface coating binders. POLYM. ENG. SCI., 56:947–954, 2016. © 2016 Society of Plastics Engineers     

Transmutation-incineration potential of transuraniums discharged from PWR-UO2 spent fuel in modified PROMETHEUS fusion reactor

This study presents the potential of the burning and/or transmutation (B/T) of transuraniums (TRUs), discharged from the pressured water reactor PWR-UO₂ spent fuel, in the modified PROMETHEUS-H fusion reactor. Two different design shapes (Models A and B) were considered. The transmutation zone (TZ), which contains the mixture of TRU nuclides (10%), was located in the modified blankets. The volume fraction of Pu in the mixture is raised from 0 to 40% stepped by 10% to determine its effect on the B/T. The fuel spheres were cladded with SiC (5%) and cooled with high-pressured helium gas (85%) for nuclear heat transfer. The calculations were performed for an operation period (OP) of up to 10 years by 75% plant factor (η) under a neutron wall load (P) of 4.7 MW/m². The results bring out that: (1) the Model B transmutes the TRUs more rapidly than the Model A; (2) the effective half-lives decrease about 20 and 40% with the increase of Pu fraction in the cases of Models A and B, respectively; (3) the M values are quite high with respect to the M value of the original PROMETHEUS fusion reactor; (4) the blankets can produce substantial electricity in situ.     

Numerical Study on Effects of Fuel Mixture Fraction and Li-6 Enrichment on Neutronic Parameters of a Fusion–Fission Hybrid Reactor

This study presents the effects of mixture fractions of nuclear fuels (mixture of fissile–fertile fuels and mixture of two different fertile fuels) and ⁶Li enrichment on the neutronic parameters (the tritium breeding ratio, TBR, the fission rate, FR, the energy multiplication ratio, M, the fissile breeding rate, FBR, the neutron leakage out of blanket, L, and the peak-to-average fission power density ratio, Γ) of a deuterium–tritium (D–T) fusion neutron-driven hybrid blanket. Three different fertile fuels (²³²Th, ²³⁸U and ²⁴⁴Cm), and one fissile fuel (²³⁵U) were selected as the nuclear fuel. Two different coolants (pressurized helium and natural lithium) were used for the nuclear heat transfer out of the fuel zone (FZ). The Boltzmann transport equation was solved numerically for obtaining the neutronic parameters with the help of the neutron transport code XSDRNPM/SCALE4.4a. In addition, these calculations were performed by also using the MCNP4B code. The sub-limits of the mixture fractions and ⁶Li enrichment were determined for the tritium self-sufficiency. The considered hybrid reactor can be operated in a self-sufficiency mode in the cases with the fuel mixtures mixed with a fraction of equal to or greater than these sub-limits. Furthermore, the numerical results show that the fissile fuel breeding and fission potentials of the blankets with the helium coolant are higher than with the lithium coolant.