Transient simulation of heterojunction photodiodes-part II:analysis of resonant cavity enhanced photodetectors

The high-speed response properties of resonant cavity enhanced (RCE) photodetectors have been investigated. The limitations on the high-speed performance of photodiodes and the advantages of RCE-detection are discussed. Transient response of heterojunction photodiodes under pulsed optical illumination has been simulated using the method described in Part I. Results on conventional AlGaAs/GaAs and RCE GaAs/InGaAs heterojunction p-i-n photodiodes are presented. For small area detectors, almost 50% bandwidth improvement along with a two-fold increase in efficiency is predicted for RCE devices over optimized conventional photodiodes. A nearly three-fold enhancement in the bandwidth-efficiency product was shown     

Characteristics of p-Ge/N-GaAs heterojunctions grown by molecular beam epitaxy

Reports the nearly ideal electrical characteristics of p-Ge/N-GaAs heterojunction diodes grown by molecular beam epitaxy. The temperature and device size dependencies of the current-voltage characteristics have been investigated. At room temperature, unity ideality factor has been demonstrated over almost six decades of current.<>     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Signal‐to‐noise ratios for measuring saliency of features extracted by eigenvector methods from ophthalmic arterial Doppler signals

Abstract: Features are used to represent patterns with minimal loss of important information. The feature vector, which is composed of the set of all features used to describe a pattern, is a reduced‐dimensional representation of that pattern. Medical diagnostic accuracies can be improved when the pattern is simplified through representation by important features. By identifying a set of salient features, the noise in a classification model can be reduced, resulting in more accurate classification. In this study, a signal‐to‐noise ratio saliency measure was employed to determine the saliency of input features of recurrent neural networks (RNNs) used in classification of ophthalmic arterial Doppler signals. Eigenvector methods were used to extract features representing the ophthalmic arterial Doppler signals. The RNNs used in the ophthalmic arterial Doppler signal classification were trained for the signal‐to‐noise ratio screening method. The application results of the signal‐to‐noise ratio screening method to the ophthalmic arterial Doppler signals demonstrated that classification accuracies of RNNs with salient input features are higher than those of RNNs with salient and non‐salient input features.     

Feature extraction by autoregressive spectral analysis using maximum likelihood estimation: internal carotid arterial Doppler signals

Abstract: In this study, Doppler signals recorded from the internal carotid artery (ICA) of 97 subjects were processed by personal computer using classical and model-based methods. Fast Fourier transform (classical method) and autoregressive (model-based method) methods were selected for processing the ICA Doppler signals. The parameters in the autoregressive method were found by using maximum likelihood estimation. The Doppler power spectra of the ICA Doppler signals were obtained by using these spectral analysis techniques. The variations in the shape of the Doppler spectra as a function of time were presented in the form of sonograms in order to obtain medical information. These Doppler spectra and sonograms were then used to compare the applied methods in terms of their frequency resolution and the effects in determination of stenosis and occlusion in the ICA. Reliable information on haemodynamic alterations in the ICA can be obtained by evaluation of these sonograms.     

Estimating Construction Material Indices with ARIMA and Optimized NARNETs

Construction Industry operates relying on various key economic indicators. One of these indicators is material prices. On the other hand, cost is a key concern in all operations of the construction industry. In the uncertain conditions, reliable cost forecasts become an important source of information. Material cost is one of the key components of the overall cost of construction. In addition, cost overrun is a common problem in the construction industry, where nine out of ten construction projects face cost overrun. In order to carry out a successful cost management strategy and prevent cost overruns, it is very important to find reliable methods for the estimation of construction material prices. Material prices have a time dependent nature. In order to increase the foreseeability of the costs of construction materials, this study focuses on estimation of construction material indices through time series analysis. Two different types of analysis are implemented for estimation of the future values of construction material indices. The first method implemented was Autoregressive Integrated Moving Average (ARIMA), which is known to be successful in estimation of time series having a linear nature. The second method implemented was Non-Linear Autoregressive Neural Network (NARNET) which is known to be successful in modeling and estimating of series with non-linear components. The results have shown that depending on the nature of the series, both these methods can successfully and accurately estimate the future values of the indices. In addition, we found out that Optimal NARNET architectures which provide better accuracy in estimation of the series can be identified/discovered as result of grid search on NARNET hyperparameters.     

Ho:CaF(2) solid-state saturable-absorber Q switch for the 2-µm Tm,Cr:Y(3)Al(5)O(12) laser

The holmium-doped calcium fluoride (Ho:CaF(2)) crystal was shown to be an effective solid-state saturable-absorber Q-switch for a flash-lamp-pumped Tm,Cr:Y(3)Al(5)O(12) laser at 2.017 μm. With a 1-cm-thick Ho(0.5%),Er(5%):CaP(2) saturable absorber and a 6.3% output coupler, a single Q-switched laser pulse of 51 mJ in energy and 60 ns in duration was obtained at a flash-lamp input energy of 85 J. With a 14.6% output coupler, a typical Q-switched laser pulse of 84 mJ and 82 ns was observed.     

Automatic detection of electroencephalographic changes using adaptive neuro-fuzzy inference system employing Lyapunov exponents

This paper describes the application of adaptive neuro-fuzzy inference system (ANFIS) model for automatic detection of electroencephalographic changes. Decision making was performed in two stages: feature extraction by computation of Lyapunov exponents and classification by the ANFIS trained with the backpropagation gradient descent method in combination with the least squares method. Five types of electroencephalogram (EEG) signals were classified by five ANFIS classifiers. To improve diagnostic accuracy, the sixth ANFIS classifier (combining ANFIS) was trained using the outputs of the five ANFIS classifiers as input data. The proposed ANFIS model combined the neural network adaptive capabilities and the fuzzy logic qualitative approach. Some conclusions concerning the saliency of features on classification of the EEG signals were obtained through analysis of the ANFIS. The performance of the ANFIS model was evaluated in terms of training performance and classification accuracies and the results confirmed that the proposed ANFIS model has potential in classifying the EEG signals.     

A gantry-based tri-modality system for bioluminescence tomography

A gantry-based tri-modality system that combines bioluminescence (BLT), diffuse optical (DOT), and x-ray computed tomography (XCT) into the same setting is presented here. The purpose of this system is to perform bioluminescence tomography using a multi-modality imaging approach. As parts of this hybrid system, XCT and DOT provide anatomical information and background optical property maps. This structural and functional a priori information is used to guide and restrain bioluminescence reconstruction algorithm and ultimately improve the BLT results. The performance of the combined system is evaluated using multi-modality phantoms. In particular, a cylindrical heterogeneous multi-modality phantom that contains regions with higher optical absorption and x-ray attenuation is constructed. We showed that a 1.5 mm diameter bioluminescence inclusion can be localized accurately with the functional a priori information while its source strength can be recovered more accurately using both structural and the functional a priori information.