Tracking the mind during reading: The influence of past, present, and future words on fixation durations.

Reading requires the orchestration of visual, attentional, language-related, and oculomotor processing constraints. This study replicates previous effects of frequency, predictability, and length of fixated words on fixation durations in natural reading and demonstrates new effects of these variables related to 144 sentences. Such evidence for distributed processing of words across fixation durations challenges psycholinguistic immediacy-of-processing and eye-mind assumptions. Most of the time the mind processes several words in parallel at different perceptual and cognitive levels. Eye movements can help to unravel these processes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Synthesis and Pharmacological In Vitro Investigations of Novel Shikonin Derivatives with a Special Focus on Cyclopropane Bearing Derivatives

Melanoma is the deadliest form of skin cancer and accounts for about three quarters of all skin cancer deaths. Especially at an advanced stage, its treatment is challenging, and survival rates are very low. In previous studies, we showed that the constituents of the roots of Onosma paniculata as well as a synthetic derivative of the most active constituent showed promising results in metastatic melanoma cell lines. In the current study, we address the question whether we can generate further derivatives with optimized activity by synthesis. Therefore, we prepared 31, mainly novel shikonin derivatives and screened them in different melanoma cell lines (WM9, WM164, and MUG-Mel2 cells) using the XTT viability assay. We identified (R)-1-(1,4-dihydro-5,8-dihydroxy-1,4-dioxonaphthalen-2-yl)-4-methylpent-3-enyl 2-cyclopropyl-2-oxoacetate as a novel derivative with even higher activity. Furthermore, pharmacological investigations including the ApoToxGlo^TM Triplex assay, LDH assay, and cell cycle measurements revealed that this compound induced apoptosis and reduced cells in the G1 phase accompanied by an increase of cells in the G2/M phase. Moreover, it showed hardly any effects on the cell membrane integrity. However, it also exhibited cytotoxicity against non-tumorigenic cells. Nevertheless, in summary, we could show that shikonin derivatives might be promising drug leads in the treatment of melanoma.     

Chemical inhibitors when timing is critical: a pharmacological concept for the maturation of T cell contacts

Cellular signal transduction proceeds through a complex network of molecular interactions and enzymatic activities. The timing of these molecular events is critical for the propagation of a signal and the generation of a specific cellular response. To define the timing of signalling events, we introduce the combination of high-resolution confocal microscopy with the application of small-molecule inhibitors at various stages of signal transduction in T cells. Inhibitors of Src-family tyrosine kinases and actin dynamics were employed to dissect the role of the lymphocyte-specific tyrosine kinase Lck in the formation and maintenance of T cell receptor/CD3-dependent contacts. Anti-CD3epsilon-coated coverslips served as a highly defined stimulus. The kinetics of the recruitment of the yellow fluorescent protein-tagged signalling protein ZAP-70 were detected by high-resolution confocal microscopy. The analysis revealed that at 5 min after receptor engagement, Lck activity was required for maintenance of contacts. In contrast, after 20 min of receptor engagement, the contacts were Lck-independent. The relevance of the timing of inhibitor application provides a pharmacological concept for the maturation of T cell-substrate contacts.     

Protecting and preserving clear barrier layers for flexible packaging materials In‐line thermal evaporation of organic topcoat layer

The end market for transparent flexible barrier films is larger than for metallized films. Presently, the market is still dominated by polymeric barrier layers but the used chemicals may be harmful for the environment. An alternative would be transparent thin layers deposited by vacuum deposition techniques using reactive processes. Ceramic materials like silicon oxide or aluminum oxide are used having a film thickness of just ～10 nm, a coating uniformity of +/?5% across and along the film at a barrier performance below 2.0 sccm/m²d for oxygen transmission rate (OTR) and below 1.0 g/m²d for water vapor transmission rate (WVTR) on PET substrates. In this paper, details will be provided about the deposition processes for these barrier layers using thermal evaporation, plasma‐assisted thermal evaporation as well as deposition by electron beam evaporation. An important factor for these high barrier transparent coatings is also to withstand the downstream processes in the whole packaging stream like slitting, lamination, printing etc. One solution is to protect the barrier layers by a Topcoat. For example, off‐line deposition of lacquers is used in field but the market penetration is low due to high process and material costs. An in‐situ Topcoat deposition is a smart solution to overcome this issue saving time and costs. Such an approach will be also described in the presentation and the impact on the performance of the final package will be discussed.     

Optische und mechanische Eigenschaften von RLVIP HfO2‐Schichten

Optical and mechanical properties of RLVIP HfO₂ films In this paper HfO₂‐films were deposited on unheated fused silica, borosilicate glass, and silicon wafer substrates by reactive low voltage ion plating (RLVIP). Optical film properties, i. e. refractive index and absorption as well as mechanical properties, particularly film stress, were investigated. Their dependence on deposition parameters, i. e. arc current and oxygen partial pressure was studied. The film refractive index was calculated from spectrophotometric measurements. The low absorption was determined by photothermal deflection spectrometry. Stress measurements were performed by bending disc method with uncoated and coated silicon wafer substrates.     

法兰克福茶屋

为了比"负建筑"更进一步设计者想到了"呼吸建筑"。负建筑与环境的关系是被动的,但"呼吸建筑"则能与环境进行互动交流。如果我们屏住呼吸而产生局促感,可能就会感觉建筑变小了。相反,如果我们深呼吸就会有空阔之感,于是就可能感觉建筑变大了,这样就产生了建筑的新动态风格。技术上,使用一种名为Tenara的新膜材料创建出了一个内含空间的双层膜结构。两层膜由聚酯线相连,膜的连接处和线放在600mm的树脂里,使其在膜上只是呈现点状。     

Layered precursors for new zeolitic materials: Synthesis and characterization of B-RUB-39 and its condensation product B-RUB-41

Condensation of layered silicate precursors leads to new, all silica zeolite frameworks. In order to introduce catalytic functionality, boron has been substituted into the silicate layer of RUB-39 in a single step synthesis process. Condensation of the silicate layer to the zeolite framework of RUB-41, RRO framework structure type, preserved B as constituent of the material. Analysis of structural details obtained from Rietveld analysis of powder diffraction data, ¹¹B and ²⁹Si NMR experiments of the as synthesized precursor as well as of the zeolite condensation product, and crystal chemical reasoning indicates segregation of B on one specific T-site. This T-site is buried in the silicate anionic layer of the precursor shielding the additional negative charge introduced by the trivalent T-atom.     

Chitin Foils and Coatings Prepared from Ionic Liquids

Chitin and its deacetylated derivative, chitosan, are nontoxic, antibacterial, biodegradable, and biocompatible biopolymers. Due to these properties, they are widely used for biomedical applications such as scaffolds for tissue engineering, wound dressings, separation membranes and antibacterial coatings. Unfortunately, there is still a lack of suitable solvent systems for the direct processing of chitin, e.g., into films and coatings. Such solvents must be nontoxic, noncorrosive, nondegrading, and allow for high chitin concentrations. Here, the potential of designed ionic liquids (IL) as solvents for chitin is outlined. Phosphonium‐ and imidazolium‐based ILs are synthesized, characterized and the influence of the cation on the solution process has been evaluated. It is shown that particularly imidazolium carboxylate‐based ILs are appropriate solvents for chitin and are suitable for the production of foils and coatings on both fabrics and foams.

     

Where the wind blows

The power systems in Denmark, Spain, Ireland, and New Zealand have some of the highest wind penetrations in the world (see Table 1). The management of the different power systems to date, with increasing amounts of wind energy, has been successful. There have been no incidents in which the wind has directly or indirectly been a major factor causing operational problems for the system. However, there are a number of parameters that are being monitored that indicate the need for active management in the near future (and in some cases already today). In this article, we briefly describe the situations in these four countries, giving special emphasis to the market integration of wind power, the use of wind forecasting, and curtailment experience. The final section provides an overview of the main wind forecasting methodologies and challenges.     

Optimization of Settling Behavior for an Efficient Solvent‐Extraction Process for Biobased Components

Extraction is a downstream process option in biobased processes. Because knowledge of phase‐separation behavior is essential for designing efficient separation processes, this study investigates the settling and coalescence behavior of biobased extraction systems by using a standard laboratory‐scale settling cell. The influence of different buffer media and Escherichia coli cells on coalescence was determined for the reactive extraction of hexane‐1,6‐diamine with isostearic acid and di(2‐ethylhexyl)phosphoric acid by using kerosene and oleyl alcohol as diluents. As a result, an increasing pH value of the buffer significantly increases the settling time. The presence of E. coli cells hinders phase separation of the investigated systems, in particular, with dispersed organic phases.