Polystyrene‐supported polyoxyethylene bound potassium permanganate as a heterogeneous oxidizing agent

Oxidation behavior of a 2 mol % divinylbenzene (DVB)‐crosslinked polystyrene‐supported permanganate function was investigated toward low molecular weight primary and secondary alcohols and aldehydes. The permanganate function was attached to a polystyrene support through cyclic polyoxyethylene (POE) units immobilized on the support. Contrary to the oxidations catalyzed by low molecular weight permanganate reagents, the oxidation of primary alcohol terminated in the aldehyde stage. The secondary alcohols were converted to the respective ketone and aldehyde to acid. The effect of the variable parameters similar to solvent, temperature, and reagent to substrate ratio was followed. Nonpolar cyclohexane was found to be the best solvent for the present study. Also the reactivity increased with increasing temperature. The oxidizing reagent possesses a long shelf life and could be recycled several times without reduction of capacity and mechanical stability. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3708–3717, 2003     

Quantitation of Cefaclor in Pharmaceutical Dosage Forms Using High Performance Liquid Chromatography

A stability-indicating high-performance liquid chromatography for the quantitation of cefaclor in pharmaceutical dosage forms has been developed. The method is accurate and precise with a percent relative standard deviation of 1.2 based on 5 readings. A number of inactive ingredients present in the capsules and suspensions did not interfere with the assay procedure. The extraction procedure from the dosage forms is very simple. The recovery from the synthetic mixtures was quantitative. The capsules which had expired 3 years ago lost only 3% of the potency. The drug appears to be very sensitive to strong acids or bases since a 5 minute boiling caused 100% degradation of drug in both the solutions.     

A 4.5-GHz 130-nm 32-KB L0 cache with a leakage-tolerant self reverse-bias bitline scheme

This paper describes a 32-KB two-read, one-write ported L0 cache for 4.5-GHz operation in 1.2-V 130-nm dual-V/sub TH/ CMOS technology. The local bitline uses a leakage-tolerant self reverse-bias (SRB) scheme with nMOS source-follower pullup access transistors, while preserving robust full-swing operation. Gate-source underdrive of -220 mV on the bitline read-select transistors is established without external bias voltages or gate-oxide overstress. Device-level measurements in the 130-nm technology show 72/spl times/ bitline active leakage reduction, enabling low-V/sub TH/ usage, 40% bitline keeper downsizing, and 16 bitcells/bitline. 11% faster read delay and 2/spl times/ higher dc noise robustness are achieved compared with high-performance dual-V/sub TH/ bitline scheme. Sustained performance and robustness benefits of the SRB technique against conventional dynamic bitline with scaling to 100- and 70-nm technology is also presented.     

A new binary accelerator system for the sulfur vulcanization of natural rubber latex

Vulcanization of latex products are usually carried out at lower temperatures compared to dry rubber products. It has been suggested that, in latex vulcanization systems where thiourea is used as a secondary accelerator, it acts as a nucleophilic reagent facilitating the cleavage of the sulfur bonds in the primary accelerator like TMTD or CBS at lower temperature. But no conclusive proof is given to such a postulate. In the present study 1-phenyl-2,4-thiobiuret (DTB II) and 1,5-diphenyl-2,4-dithiobiuret (DTB III), which are more nucleophilic than thiourea and which vary in their nucleophilic reactivity, were studied as secondary accelerators along with tetramethyl thiuram disulphide (TMTD) and N-cyclohexylbenzothiazyl sulphenamide (CBS) in the vulcanization of natural rubber latex. These binary systems were found to be very effective in reducing the optimum vulcanization time. Also it was noted that 1-phenyl-2,4-dithiobiuret, which is more nucleophilic, is more reactive (as observed from the reduction in optimum cure time) as a secondary accelerator, indicating a nucleophilic reaction mechanism in the vulcanization reactions under review. The optimum dosages of the secondary accelerators required were derived. Physical properties like tensile strength, 300% modulus, and elongation at break of the latex vulcanizates were also studied. There is a definite advantage with respect to many of these properties for dithiobiuret systems compared to the systems containing TMTD alone or TMTD/thiourea. DTB III gives higher values in many of these physical properties than DTB II. Chemical characterization of the vulcanizates was also carried out to correlate the physical properties with the type of chemical crosslinks formed. © 1993 John Wiley & Sons, Inc.     

Characterization and screening for mutations of the growth arrest-specific 11 (GAS11) and C16orf3 genes at 16q24.3 in breast cancer

BACKGROUND: Both fibroblast-mediated cytokine gene therapy and bone marrow transplantation (BMT) have proven to be efficient protocols for the recovery of bone marrow depression. In this report, the effects of fibroblast-mediated interleukin (IL)-6 gene therapy, in combination with BMT, on the recovery of irradiation-induced bone marrow depression were investigated. METHODS: NIH3T3 fibroblast cells engineered to secrete IL-6 (NIH3T3-IL-6) or NIH3T3 cells transduced with the neomycin gene (NIH3T3-Neo), in combination with 10(7), 10(6), or 10(5) syngeneic bone marrow cells, were implanted into irradiated mice. RESULTS: The platelets and white blood cells in the peripheral blood of the irradiated mice increased greatly 12 days after implantation of NIH3T3-IL-6 cells and BMT, the white blood cell counts were restored to a normal level 32 days after the combined therapy, and the platelet number was obviously higher than that in mice implanted with NIH3T3-Neo and BMT. Twenty and 25 days after the combined therapy, the mice showed accelerated recovery of colony-forming unit (CFU)-granulocyte/macrophages and CFU-megakaryocytes when compared with the mice implanted with NIH3T3-Neo cells and BMT. Ten days after lethal irradiation with gamma rays, the spleens formed more CFU-spleen in mice implanted with NIH3T3-IL-6 cells and BMT than in mice injected with phosphate-buffered saline or NIH3T3-Neo cells. Combined therapy with NIH3T3-IL-6 cell implantation and BMT delayed the survival period of the hematopoietic-depressed mice significantly when compared with therapy with NIH3T3-Neo cell implantation and BMT. CONCLUSIONS: These data demonstrated that the combined therapy of fibroblast-mediated IL-6 gene therapy and BMT could significantly promote the recovery of irradiation-induced hematopoietic depression.     

Efficient derivation of the optimal mean-square binary morphological filter from the conditional expectation via a switching algorithm for discrete power-set lattice

Once designed, implementation of an optimal mean-square binary morphological filter is extremely fast, especially when the erosions are implemented on a suitable parallel processor. On the other hand, optimal filter design involes a computationally burdensome search procedure that can, in practice, be intractable. The present paper provides an algorithm for filter design that is based on the relationship between the optimal morphological filter and the conditional expectation. The algorithm proceeds by changing the conditional expectation into a morphological filter while at the same time increasing the mean-square error by a minimal amount. It does so by switching observations between the 1-set and the 0-set of the conditional expectation. The switching algorithm is extremely efficient in many noise environments, and therefore provides a filter design that can be useful for online structuring-element updating. Owing to the relationship between stack and morphological filters, the algorithm is at once useful for finding optimal binary stack filters.     

Effect of the nature and degree of crosslinking on the Rose Bengal uptake by DVB‐, NNMBA‐, HDODA‐, and TTEGDA‐crosslinked aminopolyacrylamides

Polyacrylamides with 2–20 mol % divinyl benzene (DVB), N,N′‐methylene‐bisacrylamide (NNMBA), 1,6‐hexanediol diacrylate (HDODA), and tetraethyleneglycol diacrylate (TTEGDA) crosslinking and without crosslinking were prepared by free radical solution polymerization. Amino functions were incorporated into these polymers by transamidation with excess ethylenediamine. The dye uptake of nonprotonated and protonated aminopolyacrylamides was followed by batch equilibration method towards Rose Bengal (RB), Methyl Orange (MO), Methyl Red (MR), and Methylene Blue (MB). RB uptake by the polyacrylamide‐supported systems is higher than other dyes. Generally the dye uptake by the protonated systems is higher than the nonprotonated systems. To optimize the conditions of dye uptake, the effect of the concentration of RB solutions, temperature, and pH were followed. Kinetic studies showed that the uptake of RB by both nonprotonated and protonated crosslinked aminopolyacrylamides is a phase boundary process followed by three‐dimensional diffusion. The extent of RB uptake by the various systems depends on the nature and degree of crosslinking, and the relative rigidity/flexibility ofthe polyacrylamide support. Thus, the dye uptake followed the order: linear > NNMBA‐ > DVB‐ > TTEGDA‐ > HDODA‐crosslinked system. The dye uptake followed the same trend as the variation of amino capacity with degree of crosslinking in the respective crosslinked system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

ESTIMATION FOR NONNEGATIVE AUTOREGRESSIVE PROCESSES WITH AN UNKNOWN LOCATION PARAMETER

Abstract. Consider an AR(1) process given by X ^t=γ+ø X _t+ Z _t≥ 1. where 0 ≤γ, 0 ≤ø 1 are unknown parameters and the innovations Z _t, ≥ 1, are independently and identically distributed positive random variables. We propose estimates of (γø) which are obtained as the solution to a linear programming problem and establish their strong consistency. When the Z _ts have the exponential distribution. our estimate becomes the conditional maximum likelihood estimate given X ₀. Under the assumption of regular variation of the innovation distribution at its left and right endpoints (assumed to be 0 and ∝ respectively), we establish asymptotic limit laws for the estimates. Consistent estimators for a class of moving-average processes with heavy-tailed innovation distribution are also presented.