Optimization of Pathogen Capture in Flowing Fluids with Magnetic Nanoparticles

Magnetic nanoparticles have been employed to capture pathogens for many biological applications; however, optimal particle sizes have been determined empirically in specific capturing protocols. Here, a theoretical model that simulates capture of bacteria is described and used to calculate bacterial collision frequencies and magnetophoretic properties for a range of particle sizes. The model predicts that particles with a diameter of 460 nm should produce optimal separation of bacteria in buffer flowing at 1 L h⁻¹. Validating the predictive power of the model, Staphylococcus aureus is separated from buffer and blood flowing through magnetic capture devices using six different sizes of magnetic particles. Experimental magnetic separation in buffer conditions confirms that particles with a diameter closest to the predicted optimal particle size provide the most effective capture. Modeling the capturing process in plasma and blood by introducing empirical constants (c_e), which integrate the interfering effects of biological components on the binding kinetics of magnetic beads to bacteria, smaller beads with 50 nm diameters are predicted that exhibit maximum magnetic separation of bacteria from blood and experimentally validated this trend. The predictive power of the model suggests its utility for the future design of magnetic separation for diagnostic and therapeutic applications.     

A non-specific lipid transfer protein from Arabidopsis is a cell wall protein

Lipid transfer proteins (LTPs), mediate the transfer of phospholipids between membranes in vitro. However, the in vivo function of LTPs is not known. To determine the precise location of a non-specific LTP from Arabidopsis, a cDNA clone was used to produce an Arabidopsis LTP:protein A fusion. Antibodies raised against the fusion were used to localize the Arabidopsis LTP by immunoelectron microscopy. LTP was found to be located in the cell wall, mainly in epidermal cells. This location appears to be inconsistent with the proposed role of the protein in intracellular lipid transfer.     

Threshold voltage-minimum gate length trade-off in buried channelPMOS devices for scaled supply voltage CMOS technologies

The trade-off between threshold voltage (V_th) and the minimum gate length (L_min) is discussed for optimizing the performance of buried channel PMOS transistors for low voltage/low power high-speed digital CMOS circuits. In a low supply voltage CMOS technology it is desirable to scale V_th and L_min for improved circuit performance. However, these two parameters cannot be scaled independently due to the channel punch-through effect. Statistical process/device modeling, split lot experiments, circuit simulations, and measurements are performed to optimize the PMOS transistor current drive and CMOS circuit speed. We show that trading PMOS transistor V_th for a smaller L_min results in faster circuits for low supply voltage (3.3 to 1.8 V) n⁺-polysilicon gate CMOS technology, Circuit simulation and measurements are performed in this study. Approximate empirical expressions are given for the optimum buried channel PMOS transistor V _th for minimizing CMOS circuit speed for cases involving: (1) constant capacitive load and (2) load capacitance proportional to MOS gate capacitance. The results of the numerical exercise are applied to the centering of device parameters of a 0.5 μm 3.3 V CMOS technology that (a) matches the speed of our 0.5 μm 5 V CMOS technology, and (b) achieves good performance down to 1.8 V power supply. For this process the optimum PMOS transistor V_th (absolute value) is approximately 0.85-0.90 V     

Kinetic Monte-Carlo simulation of network formation

Summary the simulation described in Part I was applied to random step polyaddition of a trifunctional monomer and the results were compared with exact solution for an infinite system. The gel point conversions, the weight-average degree of polymerization before (P _w) and beyond (P _w,sol) the gel point, the sol fraction and the cycle rank were used for comparison. The best way for detection of the gel point conversion is the extrapolation of the gel fraction, w _g, to w _g=0. The largest fluctuations are exhibited by P _w and P _w,sol. To get results closer to the exact ones, one can repeat several experiments with smaller number of units or increase the number of units, the former way being somewhat more economical. Typical orders of magnitude used were 10⁷ monomeric units.     

Depression in college students: Personality and experiential factors.

In this study we examined the nature of college-student depression and its relation to personality variables and to experiences unique to college life. Thirty-five depressed and 39 nondepressed students completed a depression inventory, a series of personality scales, and a survey developed to investigate the impact of potentially distressing components of college life. Results revealed that college-student depression, though mild in intensity, represents a serious problem: Three quarters of depressed students had been depressed for more than 3 months, and half had contemplated suicide. Both personality characteristics and experiential variables were found to be significantly related to depression, together accounting for approximately half the variance. We examined individual personality traits and experiential variables that were found to differ between depressed and nondepressed subjects, and we discuss the implications of the findings for counseling and for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Low strain rate plasticity of continuously cast carbon steels

By a special plastometric method, the straightening operation of a vertically cast strand of two carbon steels was simulated. The temperature dependence of the low strain rate plasticity of both the steels examined is analogous although caused by very different reasons. As to the plain carbon steel, the amount of ferrite and its location is of prime importance, whereas in the case of eutectoid steel various modes of fracture and the influence of temperature on the relative plasticity of type II MnS inclusions are influencial. To avoid transverse cracking, it seems to be suitable to keep the strand at a rather high temperature (above 900 °C). Temperature cycling seems to be fundamental as to the structural changes taking place in the strand (grain size refining, ferrite fraction if any), whereas analogous influences of straining are more or less inexpressive. Of course, the results obtained are of quality only since the practical and laboratory conditions differ significantly. The knowledge obtained could be applied in regulating the intensity of strand cooling with the aim of lowering the waste portion and improving the surface quality of worked products.     

Bit error simulation for π/4 DQPSK mobile radio communicationsusing two-ray and measurement-based impulse response models

An accurate software/hardware bit-by-bit error simulator for mobile radio communications is described. Simulation results in indoor and outdoor channels are compared with theoretical results. Bit error rate (BER) results in simulated frequency-selective fading channels generated by several channel models such as two-ray, constant amplitude, and simulated indoor radio channel impulse models (SIRCIMs) are presented. It is shown that BER is not only dependent on the RMS delay spread, but also on the distribution of temporal and spatial multipath components in local areas. An important result is that a two-ray Rayleigh fading model is a poor fit for indoor wireless channels and, if used, can underestimate the BER by orders of magnitude. A real-time bit error simulation of video transmission using the bit-by-bit error simulator is described. The simulator, called BERSIM, is shown to be a useful tool for evaluating emerging data transmission products for digital mobile communications