Healing Pattern Analysis for Dental Implants Using the Mechano-Regulatory Tissue Differentiation Model

(1) Background: Our aim is to reveal the influence of the geometry designs on biophysical stimuli and healing patterns. The design guidelines for dental implants can then be provided. (2) Methods: A two-dimensional axisymmetric finite element model was developed based on mechano-regulatory algorithm. The history of tissue differentiation around eight selected implants can be predicted. The performance of the implants was evaluated by bone area (BA), bone-implant contact (BIC); (3) Results: The predicted healing patterns have very good agreement with the experimental observation. Many features observed in literature, such as soft tissues covering on the bone-implant interface; crestal bone loss; the location of bone resorption bumps, were reproduced by the model and explained by analyzing the solid and fluid biophysical stimuli and (4) Conclusions: The results suggested the suitable depth, the steeper slope of the upper flanks, and flat roots of healing chambers can improve the bone ingrowth and osseointegration. The mechanism related to solid and fluid biophysical stimuli were revealed. In addition, the model developed here is efficient, accurate and ready to extend to any geometry of dental implants. It has potential to be used as a clinical application for instant prediction/evaluation of the performance of dental implants.     

Catalytic aminolysis of epoxide by alumina prepared from amine-protected Al precursor

The catalytic activities of alumina prepared from an Al alkoxide-amine adduct monomer for the reaction of cyclopentene oxide with piperidine was determined after various pretreatments, including calcination and exposure to moisture. They were compared with the activity of alumina prepared by the conventional hydrolysis method. It was found that the as-prepared sample from the alkoxide-amine monomer preparation was five times more active than a conventional preparation, suggesting that it has a higher density of surface Lewis acid sites. However, its activity was much more severely suppressed by exposure to moisture.     

实时GPS定位中的自适应故障检测

给出了一种GPS卡尔曼滤波的自适应方案,该方案能根据GPS导航中变化的动态来估计协方差.当增强卡尔曼滤波器时,方案可得到更精确的定位修正.此外,也可将此估计方法用于完整监测,以增强故障检测的阈值选择.采用模拟数据验证了提出方法的正确性.     

Minimum-energy multicast in mobile ad hoc networks using network coding

The minimum energy required to transmit one bit of information through a network characterizes the most economical way to communicate in a network. In this paper, we show that, under a layered model of wireless networks, the minimum energy-per-bit for multicasting in a mobile ad hoc network can be found by a linear program; the minimum energy-per-bit can be attained by performing network coding. Compared with conventional routing solutions, network coding not only allows a potentially lower energy-per-bit to be achieved, but also enables the optimal solution to be found in polynomial time, in sharp contrast with the NP-hardness of constructing the minimum-energy multicast tree as the optimal routing solution. We further show that the minimum energy multicast formulation is equivalent to a cost minimization with linear edge-based pricing, where the edge prices are the energy-per-bits of the corresponding physical broadcast links. This paper also investigates minimum energy multicasting with routing. Due to the linearity of the pricing scheme, the minimum energy-per-bit for routing is achievable by using a single distribution tree. A characterization of the admissible rate region for routing with a single tree is presented. The minimum energy-per-bit for multicasting with routing is found by an integer linear program. We show that the relaxation of this integer linear program, studied earlier in the Steiner tree literature, can now be interpreted as the optimization for minimum energy multicasting with network coding. In short, this paper presents a unifying study of minimum energy multicasting with network coding and routing.     

Implementation of media processors

Conventional standard processors do not correspond well to the characteristics of multimedia signal processor algorithms. Therefore, special architectural approaches are necessary for multimedia processors to deliver the required high processing power with efficient use of hardware resources. Programmable approaches offer a high degree of flexibility. In order to attain multimedia signal processor performance, architectural strategies for programmable processors are based on parallelization and adaptation principles. The future multimedia signal processor implementation hinges upon an optimal trade-off between the two design spaces, which can be effectively addressed by a codesign approach     

Dynamic programming implementation on array processor architectures

Dynamic Programming (DP) applies to many signal and image processing applications including boundary following, the Viterbi algorithm, dynamic time warping, etc. This paper presents an array processor implementation of generic dynamic programming. Our architecture is a SIMD array attached to a host computer. The processing element of the architecture is based on an ASIC design opting for maximum speed-up. By adopting a torus interconnection network, a dual buffer structure, and a multilevel pipeline, the performance of the DP chip is expected to reach the order of several GOPS. The paper discusses both the dedicated hardware design and the data flow control of the DP chip and the total array.This work was supported in part by the NATO, Scientific and Environmental Affairs Division, Collaborative Research Grant SA.5-2-05(CRG.960201)424/96/JARC-501.     

Multimedia Signal Processors: An Architectural Platform with Algorithmic Compilation

Novel algorithmic features of multimedia applications and advances in VLSI technologies are driving forces behind the new multimedia signal processors. We propose an architecture platform which could provide high performance and flexibility, and would require less external I/O and memory access. It is comprised of array processors to be used as the hardware accelerator and RISC cores to be used as the basis of the programmable processor. It is a hierarchical and scalable architecture style which facilitates the hardware-software codesign of multimedia signal processing circuits and systems. While some control-intensive functions can be implemented using programmable CPUs, other computation-intensive functions can rely on hardware accelerators.To compile multimedia algorithms, we also present an operation placement and scheduling scheme suitable for the proposed architectural platform. Our scheme addresses data reusability and exploits local communication in order to avoid the memory/communication bandwidth bottleneck, which leads to faster program execution. Our method shows a promising performance: a linear speed-up of 16 times can be achieved for the block-matching motion estimation algorithm and the true motion tracking algorithm, which have formed many multimedia applications (e.g., MPEG-2 and MPEG-4).     

Abdominal vagotomy alters the structure of the ingestive behavior of rats ingesting liquid diets.

A microstructural analysis of the licking behavior of the rat was used to investigate the effects of total abdominal vagotomy on ingestive behavior. Vagotomy decreased the meal size of milk and 3 concentrations of sucrose. The decrease was due to an increase in the decline in the rate of licking during the meal, suggesting that negative feedback from the gastrointestinal tract was enhanced by vagotomy, perhaps because of accelerated clearance of fluid from the stomach to the intestine. No evidence was found for motor dysfunction of licking or alterations in gustatory sensitivity to the test solution. The results suggest that vagotomy enhanced the strength of an extravagally mediated negative feedback signal from the intestine and that the vagus nerve normally prevents this from occurring by regulating gastric clearance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fabrication of low-loss IR-transmitting Ge30As10Se30Te30 glass fibers

Improved purification and processing techniques have been utilized to fabricate Ge₃₀As₁₀Se₃₀Te₃₀ glass fibers with a minimum loss of O.11 dB/m at 6.6 μm. This is the lowest loss reported for any telluride glass fiber in the infrared region. Furthermore, the fibers exhibit less than 1 dB/m loss between 5.25 and 9.5 μm