Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

A conceptual model of riparian forest restoration for natural flood management

There is an increasing emphasis on using natural processes, including riparian forest restoration, to enhance the ecological, hydrological and geomorphological functioning of watercourses. However, we have insufficient knowledge on how the supply and retention of in‐channel wood from riparian forest stands changes with age, with inferences typically based on data from terrestrial forests. This presents a challenge in estimating the efficacy and functional lifespan of restoration projects. In this paper, we use a riparian forest growth model to show there is a lag of up to 40–50 years between the start of forest growth and trees delivering wood to the channel that is large enough to resist fluvial transport, anchor logjams and so increase channel complexity and hydraulic resistance. Resource managers need to account for realistic timescales over which changes promoted by riparian woodland restoration will occur and may need to consider using interim engineered logjams as the forest develops.     

Oriented polymer grid reinforcement

Tensar high strength oriented polymer grids were developed in the UK in the late 1970s. Extensive research has been conducted in Europe and North America to investigate the various civil engineering applications for these materials. The availability of these high strength, durable reinforcing grids has led to many innovative and economical developments in geotechnical and highway engineering. This paper describes the major application areas: reinforced soil walls and slopes, reinstatement of slope failures; embankment foundations over soft soil; reinforcement of road bases for paved roads; and asphalt reinforcement.     

Arcing phenomenon as related to fire investigation

A mathematical analysis of arcing phenomenon is presented as related to fire. It is shown that arcing has a great destructive power while a short circuit has not. Experimental results are also given. Note: Dr. Béland, ing., is a Professor of Electrical Engineering at the University of Sherbrooke, Sherbrooke, Quebec, Canada, and conducts research on fire, particularly fires of electrical origin.     

The biofiltration of indoor air: implications for air quality

An alternative method of maintaining indoor air quality may be through the biofiltration of air recirculating within the structure rather than the traditional approach of ventilation. This approach is currently being investigated. Prior to its acceptance for dealing with volatile organic compounds (VOCs) and CO2, efforts were made to determine whether the incorporation of this amount of biomass into the indoor space can have an (negative) impact on indoor air quality. A relatively large ecologically complex biofilter composed of a ca. 10 m2 bioscrubber, 30 m2 of plantings and a 3,500 litre aquarium were established in a 160 m2 'airtight' room in a recently constructed office building in downtown Toronto. This space maintained ca. 0.2 air changes per hour (ACH) compared to the 15 to 20 ACH (with a 30% refresh rate) of other spaces in the same building. Air quality parameters of concern were total VOCs (TVOCs), formaldehyde and aerial spore counts. TVOC and formaldehyde levels in the biofilter room were the same or significantly less than other spaces in the building despite a much slower refresh rate. Aerial spore levels were slightly higher than other indoor spaces but were well within reported values for 'healthy' indoor spaces. Levels appeared to be dependent on horticultural management practices within the space. Most genera of fungal spores present were common indoors and the other genera were associated with living or dead plant material or soil. From these results, the incorporation of a large amount of biomass associated with indoor biofilters does not in itself lower indoor air quality.     

Effect of particle shape on methanol partial oxidation in a fixed bed using CFD reactor modeling

Particle shape is one of the most important parameters in the design and optimization of fixed-bed processes. To address the impact of particle shape on methanol partial oxidation to formaldehyde over molybdate catalyst, packings of spheres, cylinders, rings, and trilobes are numerically generated. The generated packings are used to carry out resolved particle Computational Fluid Dynamics (CFD) simulations under industrial conditions. Pressure drop, voidage and velocity profiles, radial heat transfer, and local and overall conversion and selectivity results are presented. Despite their lower particle surface area, lower particle effectiveness and more uneven flow distribution than trilobes, and lower overall heat transfer coefficient than cylinders, rings had the best conversion and selectivity due to their balance between the factors. Three longer tubes of rings, rings and cylinders, and rings and trilobes are simulated and show a small gain in selectivity for the rings and trilobes.     

From making things public to the design of creative democracy: Dewey’s democratic vision and participatory design

ABSTRACT

Participatory design’s (PD) shift from the workplace to civic settings has led to a reorientation of the field’s political bearings. Informed by science and technology studies, practice is now often framed in terms of design things, infrastructuring, and John Dewey’s concept of ‘publics’. Taking the publics concept as a starting point, the present article seeks to contribute by providing a broader outline of Dewey’s democratic vision. It is proposed that Dewey’s vision may be seen to offer a potentially useful perspective that directly relates the ‘publics’ concept to the areas of freedom, experientialism, and the institutions of government. Linking to contemporary developments in PD and beyond, the vision is seen to carry conceptual and practical implications, which, if borne out, would connect the discipline’s capacity to ‘spark’ publics into being to the processes of policy formation and institutional reform.     

Mining knowledge from text repositories using information extraction: A review

There are two approaches to mining text form online repositories. First, when the knowledge to be discovered is expressed directly in the documents to be mined, Information Extraction (IE) alone can serve as an effective tool for such text mining. Second, when the documents contain concrete data in unstructured form rather than abstract knowledge, Information Extraction (IE) can be used to first transform the unstructured data in the document corpus into a structured database, and then use some state-of-the-art data mining algorithms/tools to identify abstract patterns in this extracted data. This paper presents the review of several methods related to these two approaches.     

我真不是素描

<正>简单的纯白瓷块加上素描感十足的黑色包边,营造出立体插画般的视觉错觉。英国陶艺家Katharine Morling用坚硬的陶瓷创作出其他瓶瓶罐罐绝对没有的3D梦幻感。一台堪称古董级别的收银机内似乎装了太多的硬币,抽屉怎么也关不上,一旁放着订书机、记事本、笔筒等小杂物。如果不是有一圈黑色包边清晰地勾勒出轮廓,它们就像是微融的白巧克力。再仔细一看,似乎又像用柔软的纸张剪出的纸艺美物。然而轻轻敲几下,清脆