Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

Porphyrin polymers and organic frameworks

The versatility of porphyrins as optoelectronic or catalytic units makes them attractive elements for inclusion in functional materials. Polymers that include porphyrins have been created with a wide variety of structures and used in a wide range of applications. This review covers recent developments in the synthesis, characterization and applications of polymeric materials in which porphyrins are key components of the repeat units, including the rapidly growing area of metal–organic frameworks and related covalent organic frameworks. © 2015 Society of Chemical Industry     

Combined use of an electrostatic precipitator and a high‐efficiency particulate air filter in building ventilation systems: Effects on cardiorespiratory health indicators in healthy adults

High‐efficiency particulate air (HEPA) filtration in combination with an electrostatic precipitator (ESP) can be a cost‐effective approach to reducing indoor particulate exposure, but ESPs produce ozone. The health effect of combined ESP‐HEPA filtration has not been examined. We conducted an intervention study in 89 volunteers. At baseline, the air‐handling units of offices and residences for all subjects were comprised of coarse, ESP, and HEPA filtration. During the 5‐week long intervention, the subjects were split into 2 groups, 1 with just the ESP removed and the other with both the ESP and HEPA removed. Each subject was measured for cardiopulmonary risk indicators once at baseline, twice during the intervention, and once 2 weeks after baseline conditions were restored. Measured indoor and outdoor PM_2.5 and ozone concentrations, coupled with time‐activity data, were used to calculate exposures. Removal of HEPA filters increased 24‐hour mean PM_2.5 exposure by 38 (95% CI: 31, 45) μg/m³. Removal of ESPs decreased 24‐hour mean ozone exposure by 2.2 (2.0, 2.5) ppb. No biomarkers were significantly associated with HEPA filter removal. In contrast, ESP removal was associated with a ?16.1% (?21.5%, ?10.4%) change in plasma‐soluble P‐selectin and a ?3.0% (?5.1%, ?0.8%) change in systolic blood pressure, suggesting reduced cardiovascular risks.     

Quantification and source characterization of volatile organic compounds from exercising and application of chlorine-based cleaning products in a university athletic center

Humans spend approximately 90% of their time indoors, impacting their own air quality through occupancy and activities. Human VOC emissions indoors from exercise are still relatively uncertain, and questions remain about emissions from chlorine-based cleaners. To investigate these and other issues, the ATHLETic center study of Indoor Chemistry (ATHLETIC) campaign was conducted in the weight room of the Dal Ward Athletic Center at the University of Colorado Boulder. Using a Vocus Proton-Transfer-Reaction Time-of-Flight Mass Spectrometer (Vocus PTR-TOF), an Aerodyne Gas Chromatograph (GC), an Iodide-Chemical Ionization Time-of-Flight Mass Spectrometer (I-CIMS), and Picarro cavity ringdown spectrometers, we alternated measurements between the weight room and supply air, allowing for determination of VOC, NH₃, H₂O, and CO₂ emission rates per person (emission factors). Human-derived emission factors were higher than previous studies of measuring indoor air quality in rooms with individuals at rest and correlated with increased CO₂ emission factors. Emission factors from personal care products (PCPs) were consistent with previous studies and typically decreased throughout the day. In addition, N-chloraldimines were observed in the gas phase after the exercise equipment was cleaned with a dichlor solution. The chloraldimines likely originated from reactions of free amino acids with HOCl on gym surfaces.     

Thermal radiative protection of fire fighters' protective clothing

A method for measuring the thermal radiative protection of actual fire fighters' garments to an incident radiative heat flux of 8.4 kW/m² is described. Typical results obtained with several conventional and prototype garments are presented. These results indicate the time to pain, and second degree burn as well as the pain alarm time. The thermal inertia of the garments is also measured based upon burn exposure time. Differences in physical properties such as garment thickness, total weight and number of layers are examined in order to establish the existence of any correlations.Issued as NRCC 26171. Reference: M. Day and P. Z. Sturgeon, Thermal Radiative Protection of Fire Fighters' Protective Clothing,Fire Technology, Vol. 23, No. 1, February 1987, p. 49.     

Bioanalytical and chemical assessment of the disinfection by-product formation potential: Role of organic matter

Disinfection by-products (DBP) formed from natural organic matter and disinfectants like chlorine and chloramine may cause adverse health effects. Here, we evaluate how the quantity and quality of natural organic matter and other precursors influence the formation of DBPs during chlorination and chloramination using a comprehensive approach including chemical analysis of regulated and emerging DBPs, total organic halogen quantification, organic matter characterisation and bioanalytical tools. In vitro bioassays allow us to assess the hazard potential of DBPs early in the chain of cellular events, when the DBPs react with their molecular target(s) and activate stress response and defence mechanisms. Given the reactive properties of known DBPs, a suite of bioassays targeting reactive modes of toxic action including genotoxicity and sensitive early warning endpoints such as protein damage and oxidative stress were evaluated in addition to cytotoxicity. Coagulated surface water was collected from three different drinking water treatment plants, along with reverse osmosis permeate from a desalination plant, and DBP formation potential was assessed after chlorination and chloramination. While effects were low or below the limit of detection before disinfection, the observed effects and DBP levels increased after disinfection and were generally higher after chlorination than after chloramination, indicating that chlorination forms higher concentrations of DBPs or more potent DBPs in the studied waters. Bacterial cytotoxicity, assessed using the bioluminescence inhibition assay, and induction of the oxidative stress response were the most sensitive endpoints, followed by genotoxicity. Source waters with higher dissolved organic carbon levels induced increased DBP formation and caused greater effects in the endpoints related to DNA damage repair, glutathione conjugation/protein damage and the Nrf2 oxidative stress response pathway after disinfection. Fractionation studies indicated that all molecular weight fractions of organic carbon contributed to the DBP formation potential, with the humic rich fractions forming the greatest amount of DBPs, while the low molecular weight fractions formed more brominated DBPs due to the high bromide to organic carbon ratio. The presence of higher bromide concentrations also led to a higher fraction of brominated DBPs as well as proportionally higher effects. This study demonstrates how a suite of analytical and bioanalytical tools can be used to effectively characterise the precursors and formation potential of DBPs.     

Cure characterization of Cycom 977‐2A carbon/epoxy composites for quickstep processing

In this effort, Quickstep, a relatively a new technique, have been employed for manufacturing of composite materials. The cure schedule provided by a prepreg manufacturer is usually designed for autoclave or other traditional processing techniques and thermosetting resin systems are formulated for ramp rate curing 2–3 K min^?1. While in case of Quickstep processing, ramp rates of 15 K min^?1 can be achieved, thus changing the chemorheology of resin. The cure process of 977‐2A carbon/epoxy composites was evaluated for Quickstep processing using differential scanning calorimetry (DSC), dynamic mechanical and thermal analysis, and Fourier transformed infrared and results were compared with cure cycle employed for autoclave curing. Optimum hold time for Quickstep processing at upper curing temperature (180°C) was determined using DSC. The hold time of 120 min at 180°C was found to be suitable for Quickstep cure cycle, producing a panel of similar degree of cure to that achieved through autoclave processing schedule. Final degree of cure was dependent on time spent at upper cure temperature and slightly on initial steps of the cure cycle which was used to control the resin flow, fiber wetting, and void removal. Quickstep processed samples exhibited higher T_g and crosslink density and similar molecular network structure to the autoclave cured samples. POLYM. ENG. SCI., 54:887–898, 2014. © 2013 Society of Plastics Engineers     

Drones for Transmission Infrastructure Inspection and Mapping Improve Efficiency

When most industry professionals think about drones, they envision a small, toy-like object with multiple blades hovering around their infrastructure, recklessly maneuvering for the pilot's enjoyment, or worse, for nefarious reasons. Often the thought immediately conjured up is of damaged electrical transmission lines or poles, damaged pipelines, gas leaks, or worse. Instead, they should envision cost savings, improved understanding of asset health, and increased safety and compliance. Energy companies, utilities, and others have already adopted the use of these unmanned aircraft, with the use of these aircraft and their sensors continuing to steadily increase to more accurately understand infrastructure and to do so in three-dimensional space.     

Deep feature learning for cover song identification

The identification of a cover song, which is an alternative version of a previously recorded song, for music retrieval has received increasing attention. Methods for identifying a cover song typically involve comparing the similarity of chroma features between a query song and another song in the data set. However, considerable time is required for pairwise comparisons. In this study, chroma features were patched to preserve the melody. An intermediate representation was trained to reduce the dimension of each patch of chroma features. The training was performed using an autoencoder, commonly used in deep learning for dimensionality reduction. Experimental results showed that the proposed method achieved better accuracy for identification and spent less time for similarity matching in both covers80 dataset and Million Song Dataset as compared with traditional approaches.     

Output Characteristics of an Optical Fibre Ring Resonator Using a Planar or Nonplanar 3 × 3 Fibre Coupler: A Comparison

Abstract

A comparison is made between the output characteristics of type 1 optical fibre ring resonators with a different type of 3 × 3 fibre coupler, that is a planar or a nonplanar coupler. Three different nonplanar couplers are formed when the central fibre 1 of a loosely coupled planar 3 × 3 fibre coupler is displaced normally from the common plane. Such a 3 × 3 fibre coupler can be identified by the value of its relative coupling ratio m ₃. The dependence of the output intensities of the ring resonator on the coupling length kd and the relative coupling ratio m ₃ of the 3 × 3 fibre coupler is investigated. The former dependence can be used as a guide to obtain suitable output characteristics of a fibre ring resonator for a specific application, while the latter can be used to choose the right type of 3 × 3 fibre coupler to build a fibre ring resonator. It is found that the output characteristics of a fibre ring resonator with a 3 × 3 planar (m ₃ = 0) or an equilateral triangular (m ₃ = 1) fibre coupler are usually better than those of the others.