Image analysis of the porous yttria-stabilized zirconia (YSZ) structure for a lanthanum ferrite-impregnated solid oxide fuel cell (SOFC) electrode

Image analysis and quantification were performed on porous scaffolds for building SOFC cathodes using the two types of YSZ powders. The two powders (U1 and U2) showed different particle size distribution and sinterability at 1300?°C. AC impedance on symmetrical cells was used to evaluate the performance of the electrode impregnated with 35-wt.% La_0.8Sr_0.2FeO₃. For example, at 700?°C, the electrode from U2 powder shows a polarization resistance (R_p) of 0.21?Ω?cm², and series resistance (R_s) of 8.5?Ω?cm² for an YSZ electrolyte of 2-mm thickness, lower than the electrode from U1 powder (0.25?Ω?cm² for R_p and 10?Ω?cm² for R_s) does. The quantitative study on image of the sintered scaffold indicates that U2 powder is better at producing architecture of high porosity or long triple phase boundary (TPB), which is attributed as the reason for the higher performance of the LSF-impregnated electrode.     

Thermal performance comparisons between passive solar and conventional housing in an Irish climate

The thermal performance of a passive solar house in Ireland having high energy conservation standards is compared with that of a similar sized conventional dwelling house. In both cases the performance over a meteorological Test Reference Year is assessed using climatically responsive models developed experimentally which predict their internal temperature without heating.

The results indicate that the conventional house required over three times as much auxiliary heating as the passive solar house. Solar gain accounted for over half the gross heat demand in the solar house compared to 13% in the bungalow. An added advantage of the increased utilization of solar gain was the estimated reduction in the heating season from nine to six months.     

Looking across communicative genres: a call for inclusive indicators of interdisciplinarity

Disciplines vary in the types of communicative genres they use to disseminate knowledge and citing patterns used within these genres. However, citation analyses have predominately relied on the references and citations of one type of communicative genre. It is argued that this is particularly problematic for studies of interdisciplinarity, where analyses bias the disciplines that communicate using the genre under investigation. This may lead to inaccurate or incomplete results in terms of fully understanding the interrelationships between disciplines. This study analyzes a set of 15,870 references from 97 LIS dissertations, in order to demonstrate the difference in discipline and author rankings, based on the genre under investigation. This work encourages future work that takes into account multiple citing and cited works, especially where indicators of interdisciplinarity are used for the allocation of resources or ranking of scholars.     

MHC class I genes in a New World primate, the cotton-top tamarin (Saguinus oedipus), have evolved by an active process of loci turnover

Lymphocytes of a New World primate, the cotton-top tamarin (Saguinus oedipus), express classical G-related major histocompatibility complex (MHC) class I molecules with unusually limited polymorphism and variability. Three G-related loci, an F locus, an E locus, and two pseudogenes (So-N1 and So-N3) have been identified by cDNA library screening and extensive PCR analysis of both cDNA and genomic DNA from the cotton-top tamarin. Furthermore, each genus of the subfamily Callitrichinae (tamarins and marmosets) appears to express its own unique set of MHC class I genes, likely due to a rapid turnover of loci. The rapid emergence of unique MHC class I genes in the Callitrichinae genera, resulting from an active process of duplication and inactivation of loci, may account for the limited diversity of the MHC class I genes in the cotton-top tamarin. To determine the nature of the entire complement of MHC class I genes in the cotton-top tamarin, we synthesized a genomic DNA library and screened it with MHC class I-specific probes. We isolated nine new MHC class I pseudogenes from this library. These newly isolated tamarin G-related MHC class I pseudogenes are not closely related to any of their functional counterparts in the tamarin, suggesting that they do not share a recent common ancestral gene with the tamarin's currently expressed MHC class I loci. In addition, these tamarin sequences display a high rate of nonsynonymous substitutions in their putative peptide binding region. This indicates that the genes from which they have derived were likely subject to positive selection and, therefore, were once functional. Our data support the notion that an extremely high rate of loci turnover is largely responsible for the limited diversity of the MHC class I genes in the cotton-top tamarin.     

Nanostructural Evolution of Titania-Based Materials Using Modified Titanium Precursors

Titanium ethoxide [Ti(OEt)₄] was modified with aminobenzoic acid (AB) or aminosalicylic acid (AS) in order to control the hydrolysis and condensation rates, and to allow the preparation of organic–inorganic hybrid materials. A suite of complementary techniques, including Fourier transform infrared spectroscopy, NMR, SEM, thermogravimetric analysis, and X-ray diffraction, were used to elucidate the effects of incorporating an organic functional group into the precursor chemistry and its subsequent affect on the structure and morphology of the resultant hybrid material. The annealing behavior of the resulting hybrid titanium base materials was also investigated. Our studies show that both amino acid organic ligands, AB and AS, chemically bounded to the titanium complex, effect the precursor reactivity, specifically the hydrolysis and polycondensation reactions, which control the evolution and formation of the nanohybrid-based titania material. Following sol–gel processing, the nanohybrid materials are amorphous, due to the incorporation of the organic component. The phase transition (amorphous–anatase–rutile) observed during annealing from 25° to 800°C show subtle differences in the crystallization behavior, which are associated with the nature of the organic ligand.     

Corrosion protection of AA 2024-T3 aluminium alloys using 3, 4-diaminobenzoic acid chelated zirconium-silane hybrid sol-gels

Organic-inorganic polymers formed by hydrolysis/condensation reactions of alkoxide precursors, such as organically modified silanes (Ormosils) are used for several industrial applications such as electronic, optical and protective anticorrosion coatings. Such materials possess superior chemical stability, physical strength and scratch resistance characteristics when compared to organic polymers. Further performance improvement can be achieved through the incorporation of zirconium and titanium based nanoparticles, also formed through from precursors via the sol-gel process. However due to the inherent reactivity differences of the above precursors, they must be hydrolysed separately before being combined for final condensation. Zirconium precursors are commonly chelated using acetic acid or acetyl acetonate prior to hydrolysis, to lower the hydrolysis rate.In this body of work, 3,4-diaminobenzoic acid (DABA) and acetyl acetonate (acac) were compared as chelating ligands for controlling the hydrolysis reactions of zirconium n-propoxide to form nanoparticles within a silane sol matrix. The sols were applied as coatings on aerospace grade aluminium alloy AA 2024-T3 and characterised by physical, spectroscopical, microscopical, electrochemical and calorimetric techniques. The electrochemical properties of the coatings, as characterised by EIS and PDS, correlated with neutral salt spray evaluations confirming that the use of DABA as a chelating ligand significantly improved the coating performance when compared to the traditional diketone ligand. The data indicates the anticorrosion properties of the nitrogen rich chelate have a key role in protecting the alloy through the formation of smaller zirconium nanoparticles, thus improving the polymer network stability.     

A systems view of temporary housing projects in post‐disaster reconstruction

Natural cataclysms (earthquakes, hurricanes and so forth) become natural disasters when they coincide with vulnerabilities; unfortunately, informal settlements in developing countries are only too often highly vulnerable – a reality amply and unhappily confirmed by available statistics. In this context, reconstruction projects are sandwiched between the short‐term necessity to act promptly and the long‐term requirements of sustainable community development – a situation that is currently reflected in alternative and conflicting paradigms at the policy level.

Adopting a case‐study approach, we explore the use of temporary housing within two post‐disaster environments, where the impact of different organizational designs leads to fundamentally different solutions to the short‐term housing problem.

Our research adopts a dynamic systems approach, associating strategic organizational team design with the development of tactical technical proposals. Two case studies from Turkey and Colombia show that a coherent approach to the sequential stages of providing immediate shelter, temporary housing and permanent reconstruction is not always obtained. The research results emphasize that the performance of reconstruction projects is directly linked to the design and management of the project team.